linux-stable.git/net, branch v6.6.55

rxrpc: Fix a race between socket set up and I/O thread creation

2024-10-10T09:58:08+00:00

commit bc212465326e8587325f520a052346f0b57360e6 upstream.

In rxrpc_open_socket(), it sets up the socket and then sets up the I/O
thread that will handle it.  This is a problem, however, as there's a gap
between the two phases in which a packet may come into rxrpc_encap_rcv()
from the UDP packet but we oops when trying to wake the not-yet created I/O
thread.

As a quick fix, just make rxrpc_encap_rcv() discard the packet if there's
no I/O thread yet.

A better, but more intrusive fix would perhaps be to rearrange things such
that the socket creation is done by the I/O thread.

Fixes: a275da62e8c1 ("rxrpc: Create a per-local endpoint receive queue and I/O thread")
Signed-off-by: David Howells 
cc: yuxuanzhe@outlook.com
cc: Marc Dionne 
cc: Simon Horman 
cc: linux-afs@lists.infradead.org
Reviewed-by: Eric Dumazet 
Link: https://patch.msgid.link/20241001132702.3122709-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events

2024-10-10T09:58:07+00:00

[ Upstream commit 844f104790bd69c2e4dbb9ee3eba46fde1fcea7b ]

After the blamed commit, we started doing this dereference for every
NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system.

static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev)
{
	struct dsa_user_priv *p = netdev_priv(dev);

	return p->dp;
}

Which is obviously bogus, because not all net_devices have a netdev_priv()
of type struct dsa_user_priv. But struct dsa_user_priv is fairly small,
and p->dp means dereferencing 8 bytes starting with offset 16. Most
drivers allocate that much private memory anyway, making our access not
fault, and we discard the bogus data quickly afterwards, so this wasn't
caught.

But the dummy interface is somewhat special in that it calls
alloc_netdev() with a priv size of 0. So every netdev_priv() dereference
is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event
with a VLAN as its new upper:

$ ip link add dummy1 type dummy
$ ip link add link dummy1 name dummy1.100 type vlan id 100
[   43.309174] ==================================================================
[   43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8
[   43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374
[   43.330058]
[   43.342436] Call trace:
[   43.366542]  dsa_user_prechangeupper+0x30/0xe8
[   43.371024]  dsa_user_netdevice_event+0xb38/0xee8
[   43.375768]  notifier_call_chain+0xa4/0x210
[   43.379985]  raw_notifier_call_chain+0x24/0x38
[   43.384464]  __netdev_upper_dev_link+0x3ec/0x5d8
[   43.389120]  netdev_upper_dev_link+0x70/0xa8
[   43.393424]  register_vlan_dev+0x1bc/0x310
[   43.397554]  vlan_newlink+0x210/0x248
[   43.401247]  rtnl_newlink+0x9fc/0xe30
[   43.404942]  rtnetlink_rcv_msg+0x378/0x580

Avoid the kernel oops by dereferencing after the type check, as customary.

Fixes: 4c3f80d22b2e ("net: dsa: walk through all changeupper notifier functions")
Reported-and-tested-by: syzbot+d81bcd883824180500c8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000001d4255060e87545c@google.com/
Signed-off-by: Vladimir Oltean 
Reviewed-by: Florian Fainelli 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20240110003354.2796778-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski 
(cherry picked from commit 844f104790bd69c2e4dbb9ee3eba46fde1fcea7b)
[Harshit: CVE-2024-26596; Resolve conflicts due to missing commit: 6ca80638b90c
 ("net: dsa: Use conduit and user terms") in 6.6.y, used dsa_slave_to_port()
 instead of dsa_user_to_port()]
Signed-off-by: Harshit Mogalapalli 
Signed-off-by: Vegard Nossum 
Signed-off-by: Greg Kroah-Hartman

netfilter: nf_tables: restore set elements when delete set fails

2024-10-10T09:58:07+00:00

>From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set->ops->walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).

This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.

Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.

The splat below shows an object in mappings memleak:

[43929.457523] ------------[ cut here ]------------
[43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[...]
[43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90
[43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246
[43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000
[43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550
[43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f
[43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0
[43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002
[43929.458103] FS:  00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[43929.458107] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0
[43929.458114] Call Trace:
[43929.458118]  
[43929.458121]  ? __warn+0x9f/0x1a0
[43929.458127]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458188]  ? report_bug+0x1b1/0x1e0
[43929.458196]  ? handle_bug+0x3c/0x70
[43929.458200]  ? exc_invalid_op+0x17/0x40
[43929.458211]  ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables]
[43929.458271]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458332]  nft_mapelem_deactivate+0x24/0x30 [nf_tables]
[43929.458392]  nft_rhash_walk+0xdd/0x180 [nf_tables]
[43929.458453]  ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables]
[43929.458512]  ? rb_insert_color+0x2e/0x280
[43929.458520]  nft_map_deactivate+0xdc/0x1e0 [nf_tables]
[43929.458582]  ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables]
[43929.458642]  ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables]
[43929.458701]  ? __rcu_read_unlock+0x46/0x70
[43929.458709]  nft_delset+0xff/0x110 [nf_tables]
[43929.458769]  nft_flush_table+0x16f/0x460 [nf_tables]
[43929.458830]  nf_tables_deltable+0x501/0x580 [nf_tables]

Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Pablo Neira Ayuso 
(cherry picked from commit e79b47a8615d42c68aaeb68971593333667382ed)
[Vegard: CVE-2024-27012; fixed conflicts due to missing commits
 0e1ea651c9717ddcd8e0648d8468477a31867b0a ("netfilter: nf_tables: shrink
 memory consumption of set elements") and
 9dad402b89e81a0516bad5e0ac009b7a0a80898f ("netfilter: nf_tables: expose
 opaque set element as struct nft_elem_priv") so we pass the correct types
 and values to nft_setelem_data_deactivate(), nft_setelem_validate(),
 nft_set_elem_ext(), etc.]
Signed-off-by: Vegard Nossum 
Signed-off-by: Greg Kroah-Hartman

netfilter: nf_tables: fix memleak in map from abort path

2024-10-10T09:58:07+00:00

[ Upstream commit 86a1471d7cde792941109b93b558b5dc078b9ee9 ]

The delete set command does not rely on the transaction object for
element removal, therefore, a combination of delete element + delete set
from the abort path could result in restoring twice the refcount of the
mapping.

Check for inactive element in the next generation for the delete element
command in the abort path, skip restoring state if next generation bit
has been already cleared. This is similar to the activate logic using
the set walk iterator.

[ 6170.286929] ------------[ cut here ]------------
[ 6170.286939] WARNING: CPU: 6 PID: 790302 at net/netfilter/nf_tables_api.c:2086 nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.287071] Modules linked in: [...]
[ 6170.287633] CPU: 6 PID: 790302 Comm: kworker/6:2 Not tainted 6.9.0-rc3+ #365
[ 6170.287768] RIP: 0010:nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.287886] Code: df 48 8d 7d 58 e8 69 2e 3b df 48 8b 7d 58 e8 80 1b 37 df 48 8d 7d 68 e8 57 2e 3b df 48 8b 7d 68 e8 6e 1b 37 df 48 89 ef eb c4 <0f> 0b 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 0f
[ 6170.287895] RSP: 0018:ffff888134b8fd08 EFLAGS: 00010202
[ 6170.287904] RAX: 0000000000000001 RBX: ffff888125bffb28 RCX: dffffc0000000000
[ 6170.287912] RDX: 0000000000000003 RSI: ffffffffa20298ab RDI: ffff88811ebe4750
[ 6170.287919] RBP: ffff88811ebe4700 R08: ffff88838e812650 R09: fffffbfff0623a55
[ 6170.287926] R10: ffffffff8311d2af R11: 0000000000000001 R12: ffff888125bffb10
[ 6170.287933] R13: ffff888125bffb10 R14: dead000000000122 R15: dead000000000100
[ 6170.287940] FS:  0000000000000000(0000) GS:ffff888390b00000(0000) knlGS:0000000000000000
[ 6170.287948] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6170.287955] CR2: 00007fd31fc00710 CR3: 0000000133f60004 CR4: 00000000001706f0
[ 6170.287962] Call Trace:
[ 6170.287967]  
[ 6170.287973]  ? __warn+0x9f/0x1a0
[ 6170.287986]  ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.288092]  ? report_bug+0x1b1/0x1e0
[ 6170.287986]  ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.288092]  ? report_bug+0x1b1/0x1e0
[ 6170.288104]  ? handle_bug+0x3c/0x70
[ 6170.288112]  ? exc_invalid_op+0x17/0x40
[ 6170.288120]  ? asm_exc_invalid_op+0x1a/0x20
[ 6170.288132]  ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables]
[ 6170.288243]  ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.288366]  ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables]
[ 6170.288483]  nf_tables_trans_destroy_work+0x588/0x590 [nf_tables]

Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements")
Signed-off-by: Pablo Neira Ayuso 
(cherry picked from commit 86a1471d7cde792941109b93b558b5dc078b9ee9)
[Vegard: CVE-2024-27011; fixed conflicts due to missing commits
 0e1ea651c9717ddcd8e0648d8468477a31867b0a ("netfilter: nf_tables: shrink
 memory consumption of set elements") and
 9dad402b89e81a0516bad5e0ac009b7a0a80898f ("netfilter: nf_tables: expose
 opaque set element as struct nft_elem_priv") so we pass the correct types
 and values to nft_setelem_active_next() + nft_set_elem_ext()]
Signed-off-by: Vegard Nossum 
Signed-off-by: Greg Kroah-Hartman

mac802154: Fix potential RCU dereference issue in mac802154_scan_worker

2024-10-10T09:57:59+00:00

commit bff1709b3980bd7f80be6786f64cc9a9ee9e56da upstream.

In the `mac802154_scan_worker` function, the `scan_req->type` field was
accessed after the RCU read-side critical section was unlocked. According
to RCU usage rules, this is illegal and can lead to unpredictable
behavior, such as accessing memory that has been updated or causing
use-after-free issues.

This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.

To address this, the `scan_req->type` value is now stored in a local
variable `scan_req_type` while still within the RCU read-side critical
section. The `scan_req_type` is then used after the RCU lock is released,
ensuring that the type value is safely accessed without violating RCU
rules.

Fixes: e2c3e6f53a7a ("mac802154: Handle active scanning")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawei Ye 
Acked-by: Miquel Raynal 
Reviewed-by: Przemek Kitszel 
Link: https://lore.kernel.org/tencent_3B2F4F2B4DA30FAE2F51A9634A16B3AD4908@qq.com
Signed-off-by: Stefan Schmidt 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE

2024-10-10T09:57:59+00:00

commit b25e11f978b63cb7857890edb3a698599cddb10e upstream.

This aligned BR/EDR JUST_WORKS method with LE which since 92516cd97fd4
("Bluetooth: Always request for user confirmation for Just Works")
always request user confirmation with confirm_hint set since the
likes of bluetoothd have dedicated policy around JUST_WORKS method
(e.g. main.conf:JustWorksRepairing).

CVE: CVE-2024-8805
Cc: stable@vger.kernel.org
Fixes: ba15a58b179e ("Bluetooth: Fix SSP acceptor just-works confirmation without MITM")
Signed-off-by: Luiz Augusto von Dentz 
Tested-by: Kiran K 
Signed-off-by: Greg Kroah-Hartman

gso: fix udp gso fraglist segmentation after pull from frag_list

2024-10-10T09:57:56+00:00

commit a1e40ac5b5e9077fe1f7ae0eb88034db0f9ae1ab upstream.

Detect gso fraglist skbs with corrupted geometry (see below) and
pass these to skb_segment instead of skb_segment_list, as the first
can segment them correctly.

Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size

Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify these skbs, breaking these invariants.

In extreme cases they pull all data into skb linear. For UDP, this
causes a NULL ptr deref in __udpv4_gso_segment_list_csum at
udp_hdr(seg->next)->dest.

Detect invalid geometry due to pull, by checking head_skb size.
Don't just drop, as this may blackhole a destination. Convert to be
able to pass to regular skb_segment.

Link: https://lore.kernel.org/netdev/20240428142913.18666-1-shiming.cheng@mediatek.com/
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Willem de Bruijn 
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241001171752.107580-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

wifi: mac80211: fix RCU list iterations

2024-10-10T09:57:27+00:00

[ Upstream commit ac35180032fbc5d80b29af00ba4881815ceefcb6 ]

There are a number of places where RCU list iteration is
used, but that aren't (always) called with RCU held. Use
just list_for_each_entry() in most, and annotate iface
iteration with the required locks.

Reviewed-by: Miriam Rachel Korenblit 
Link: https://patch.msgid.link/20240827094939.ed8ac0b2f897.I8443c9c3c0f8051841353491dae758021b53115e@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

tcp: avoid reusing FIN_WAIT2 when trying to find port in connect() process

2024-10-10T09:57:26+00:00

[ Upstream commit 0d9e5df4a257afc3a471a82961ace9a22b88295a ]

We found that one close-wait socket was reset by the other side
due to a new connection reusing the same port which is beyond our
expectation, so we have to investigate the underlying reason.

The following experiment is conducted in the test environment. We
limit the port range from 40000 to 40010 and delay the time to close()
after receiving a fin from the active close side, which can help us
easily reproduce like what happened in production.

Here are three connections captured by tcpdump:
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1
127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1
// a few seconds later, within 60 seconds
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2
127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193
// later, very quickly
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1

As we can see, the first flow is reset because:
1) client starts a new connection, I mean, the second one
2) client tries to find a suitable port which is a timewait socket
   (its state is timewait, substate is fin_wait2)
3) client occupies that timewait port to send a SYN
4) server finds a corresponding close-wait socket in ehash table,
   then replies with a challenge ack
5) client sends an RST to terminate this old close-wait socket.

I don't think the port selection algo can choose a FIN_WAIT2 socket
when we turn on tcp_tw_reuse because on the server side there
remain unread data. In some cases, if one side haven't call close() yet,
we should not consider it as expendable and treat it at will.

Even though, sometimes, the server isn't able to call close() as soon
as possible like what we expect, it can not be terminated easily,
especially due to a second unrelated connection happening.

After this patch, we can see the expected failure if we start a
connection when all the ports are occupied in fin_wait2 state:
"Ncat: Cannot assign requested address."

Reported-by: Jade Dong 
Signed-off-by: Jason Xing 
Reviewed-by: Eric Dumazet 
Link: https://patch.msgid.link/20240823001152.31004-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

netpoll: Ensure clean state on setup failures

2024-10-10T09:57:26+00:00

[ Upstream commit ae5a0456e0b4cfd7e61619e55251ffdf1bc7adfb ]

Modify netpoll_setup() and __netpoll_setup() to ensure that the netpoll
structure (np) is left in a clean state if setup fails for any reason.
This prevents carrying over misconfigured fields in case of partial
setup success.

Key changes:
- np->dev is now set only after successful setup, ensuring it's always
  NULL if netpoll is not configured or if netpoll_setup() fails.
- np->local_ip is zeroed if netpoll setup doesn't complete successfully.
- Added DEBUG_NET_WARN_ON_ONCE() checks to catch unexpected states.
- Reordered some operations in __netpoll_setup() for better logical flow.

These changes improve the reliability of netpoll configuration, since it
assures that the structure is fully initialized or totally unset.

Suggested-by: Paolo Abeni 
Signed-off-by: Breno Leitao 
Link: https://patch.msgid.link/20240822111051.179850-2-leitao@debian.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin