linux-stable.git/net, branch v6.6.25 Linux kernel stable tree Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync 2024-04-03T13:28:58+00:00 Luiz Augusto von Dentz luiz.von.dentz@intel.com 2024-03-26T16:43:17+00:00 9ae3954dd36ba324e63bee297e791e19f7d885c6 commit 1c3366abdbe884be62e5a7502b4db758aa3974c6 upstream. hci_cmd_sync_cancel_sync shall check the error passed to it since it will be propagated using req_result which is __u32 it needs to be properly set to a positive value if it was passed as negative othertise IS_ERR will not trigger as -(errno) would be converted to a positive value. Fixes: 63298d6e752f ("Bluetooth: hci_core: Cancel request on command timeout") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reported-and-tested-by: Thorsten Leemhuis <linux@leemhuis.info> Closes: https://lore.kernel.org/all/08275279-7462-4f4a-a0ee-8aa015f829bc@leemhuis.info/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1c3366abdbe884be62e5a7502b4db758aa3974c6 upstream.

hci_cmd_sync_cancel_sync shall check the error passed to it since it
will be propagated using req_result which is __u32 it needs to be
properly set to a positive value if it was passed as negative othertise
IS_ERR will not trigger as -(errno) would be converted to a positive
value.

Fixes: 63298d6e752f ("Bluetooth: hci_core: Cancel request on command timeout")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reported-and-tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/all/08275279-7462-4f4a-a0ee-8aa015f829bc@leemhuis.info/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: cfg80211: add a flag to disable wireless extensions 2024-04-03T13:28:54+00:00 Johannes Berg johannes.berg@intel.com 2024-03-14T10:09:51+00:00 6956ba7da71bb1f69f0312e4f6d122c1376939e9 commit be23b2d7c3b7c8bf57b1cf0bf890bd65df9d0186 upstream. Wireless extensions are already disabled if MLO is enabled, given that we cannot support MLO there with all the hard- coded assumptions about BSSID etc. However, the WiFi7 ecosystem is still stabilizing, and some devices may need MLO disabled while that happens. In that case, we might end up with a device that supports wext (but not MLO) in one kernel, and then breaks wext in the future (by enabling MLO), which is not desirable. Add a flag to let such drivers/devices disable wext even if MLO isn't yet enabled. Cc: stable@vger.kernel.org Link: https://msgid.link/20240314110951.b50f1dc4ec21.I656ddd8178eedb49dc5c6c0e70f8ce5807afb54f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be23b2d7c3b7c8bf57b1cf0bf890bd65df9d0186 upstream.

Wireless extensions are already disabled if MLO is enabled,
given that we cannot support MLO there with all the hard-
coded assumptions about BSSID etc.

However, the WiFi7 ecosystem is still stabilizing, and some
devices may need MLO disabled while that happens. In that
case, we might end up with a device that supports wext (but
not MLO) in one kernel, and then breaks wext in the future
(by enabling MLO), which is not desirable.

Add a flag to let such drivers/devices disable wext even if
MLO isn't yet enabled.

Cc: stable@vger.kernel.org
Link: https://msgid.link/20240314110951.b50f1dc4ec21.I656ddd8178eedb49dc5c6c0e70f8ce5807afb54f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes 2024-04-03T13:28:54+00:00 Felix Fietkau nbd@nbd.name 2024-03-16T07:43:36+00:00 6b948b54c8bd620725e0c906e44b10c0b13087a7 commit 4f2bdb3c5e3189297e156b3ff84b140423d64685 upstream. When moving a station out of a VLAN and deleting the VLAN afterwards, the fast_rx entry still holds a pointer to the VLAN's netdev, which can cause use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx after the VLAN change. Cc: stable@vger.kernel.org Reported-by: ranygh@riseup.net Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://msgid.link/20240316074336.40442-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4f2bdb3c5e3189297e156b3ff84b140423d64685 upstream.

When moving a station out of a VLAN and deleting the VLAN afterwards, the
fast_rx entry still holds a pointer to the VLAN's netdev, which can cause
use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx
after the VLAN change.

Cc: stable@vger.kernel.org
Reported-by: ranygh@riseup.net
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240316074336.40442-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xfrm: Avoid clang fortify warning in copy_to_user_tmpl() 2024-04-03T13:28:40+00:00 Nathan Chancellor nathan@kernel.org 2024-02-21T21:46:21+00:00 b475226733f16ec4c623c1b087bf8b2303223641 commit 1a807e46aa93ebad1dfbed4f82dc3bf779423a6e upstream. After a couple recent changes in LLVM, there is a warning (or error with CONFIG_WERROR=y or W=e) from the compile time fortify source routines, specifically the memset() in copy_to_user_tmpl(). In file included from net/xfrm/xfrm_user.c:14: ... include/linux/fortify-string.h:438:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] 438 | __write_overflow_field(p_size_field, size); | ^ 1 error generated. While ->xfrm_nr has been validated against XFRM_MAX_DEPTH when its value is first assigned in copy_templates() by calling validate_tmpl() first (so there should not be any issue in practice), LLVM/clang cannot really deduce that across the boundaries of these functions. Without that knowledge, it cannot assume that the loop stops before i is greater than XFRM_MAX_DEPTH, which would indeed result a stack buffer overflow in the memset(). To make the bounds of ->xfrm_nr clear to the compiler and add additional defense in case copy_to_user_tmpl() is ever used in a path where ->xfrm_nr has not been properly validated against XFRM_MAX_DEPTH first, add an explicit bound check and early return, which clears up the warning. Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1985 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1a807e46aa93ebad1dfbed4f82dc3bf779423a6e upstream.

After a couple recent changes in LLVM, there is a warning (or error with
CONFIG_WERROR=y or W=e) from the compile time fortify source routines,
specifically the memset() in copy_to_user_tmpl().

  In file included from net/xfrm/xfrm_user.c:14:
  ...
  include/linux/fortify-string.h:438:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
    438 |                         __write_overflow_field(p_size_field, size);
        |                         ^
  1 error generated.

While ->xfrm_nr has been validated against XFRM_MAX_DEPTH when its value
is first assigned in copy_templates() by calling validate_tmpl() first
(so there should not be any issue in practice), LLVM/clang cannot really
deduce that across the boundaries of these functions. Without that
knowledge, it cannot assume that the loop stops before i is greater than
XFRM_MAX_DEPTH, which would indeed result a stack buffer overflow in the
memset().

To make the bounds of ->xfrm_nr clear to the compiler and add additional
defense in case copy_to_user_tmpl() is ever used in a path where
->xfrm_nr has not been properly validated against XFRM_MAX_DEPTH first,
add an explicit bound check and early return, which clears up the
warning.

Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1985
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netfilter: nf_tables: reject constant set with timeout 2024-04-03T13:28:39+00:00 Pablo Neira Ayuso pablo@netfilter.org 2024-03-01T00:04:11+00:00 7332d7389b5e764e874a0c195cd1e18f83dc659b commit 5f4fc4bd5cddb4770ab120ce44f02695c4505562 upstream. This set combination is weird: it allows for elements to be added/deleted, but once bound to the rule it cannot be updated anymore. Eventually, all elements expire, leading to an empty set which cannot be updated anymore. Reject this flags combination. Cc: stable@vger.kernel.org Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5f4fc4bd5cddb4770ab120ce44f02695c4505562 upstream.

This set combination is weird: it allows for elements to be
added/deleted, but once bound to the rule it cannot be updated anymore.
Eventually, all elements expire, leading to an empty set which cannot
be updated anymore. Reject this flags combination.

Cc: stable@vger.kernel.org
Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netfilter: nf_tables: disallow anonymous set with timeout flag 2024-04-03T13:28:39+00:00 Pablo Neira Ayuso pablo@netfilter.org 2024-02-29T23:11:10+00:00 c0c2176d1814b92ea4c8e7eb7c9cd94cd99c1b12 commit 16603605b667b70da974bea8216c93e7db043bf1 upstream. Anonymous sets are never used with timeout from userspace, reject this. Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work. Cc: stable@vger.kernel.org Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support") Reported-by: lonial con <kongln9170@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 16603605b667b70da974bea8216c93e7db043bf1 upstream.

Anonymous sets are never used with timeout from userspace, reject this.
Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work.

Cc: stable@vger.kernel.org
Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout 2024-04-03T13:28:39+00:00 Pablo Neira Ayuso pablo@netfilter.org 2024-03-04T13:22:12+00:00 b2d6f9a5b1cf968f1eaa71085ceeb09c2cb276b1 commit 552705a3650bbf46a22b1adedc1b04181490fc36 upstream. While the rhashtable set gc runs asynchronously, a race allows it to collect elements from anonymous sets with timeouts while it is being released from the commit path. Mingi Cho originally reported this issue in a different path in 6.1.x with a pipapo set with low timeouts which is not possible upstream since 7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set element timeout"). Fix this by setting on the dead flag for anonymous sets to skip async gc in this case. According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on transaction abort"), Florian plans to accelerate abort path by releasing objects via workqueue, therefore, this sets on the dead flag for abort path too. Cc: stable@vger.kernel.org Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Reported-by: Mingi Cho <mgcho.minic@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 552705a3650bbf46a22b1adedc1b04181490fc36 upstream.

While the rhashtable set gc runs asynchronously, a race allows it to
collect elements from anonymous sets with timeouts while it is being
released from the commit path.

Mingi Cho originally reported this issue in a different path in 6.1.x
with a pipapo set with low timeouts which is not possible upstream since
7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set
element timeout").

Fix this by setting on the dead flag for anonymous sets to skip async gc
in this case.

According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on
transaction abort"), Florian plans to accelerate abort path by releasing
objects via workqueue, therefore, this sets on the dead flag for abort
path too.

Cc: stable@vger.kernel.org
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Reported-by: Mingi Cho <mgcho.minic@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: fix IPSTATS_MIB_OUTPKGS increment in OutForwDatagrams. 2024-04-03T13:28:39+00:00 Heng Guo heng.guo@windriver.com 2023-10-19T01:20:53+00:00 56712f74b7046b36d142f2f40613566afa0618df commit b4a11b2033b7d3dfdd46592f7036a775b18cecd1 upstream. Reproduce environment: network with 3 VM linuxs is connected as below: VM1<---->VM2(latest kernel 6.5.0-rc7)<---->VM3 VM1: eth0 ip: 192.168.122.207 MTU 1500 VM2: eth0 ip: 192.168.122.208, eth1 ip: 192.168.123.224 MTU 1500 VM3: eth0 ip: 192.168.123.240 MTU 1500 Reproduce: VM1 send 1400 bytes UDP data to VM3 using tools scapy with flags=0. scapy command: send(IP(dst="192.168.123.240",flags=0)/UDP()/str('0'*1400),count=1, inter=1.000000) Result: Before IP data is sent. ---------------------------------------------------------------------- root@qemux86-64:~# cat /proc/net/snmp Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates Ip: 1 64 11 0 3 4 0 0 4 7 0 0 0 0 0 0 0 0 0 ...... ---------------------------------------------------------------------- After IP data is sent. ---------------------------------------------------------------------- root@qemux86-64:~# cat /proc/net/snmp Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates Ip: 1 64 12 0 3 5 0 0 4 8 0 0 0 0 0 0 0 0 0 ...... ---------------------------------------------------------------------- "ForwDatagrams" increase from 4 to 5 and "OutRequests" also increase from 7 to 8. Issue description and patch: IPSTATS_MIB_OUTPKTS("OutRequests") is counted with IPSTATS_MIB_OUTOCTETS ("OutOctets") in ip_finish_output2(). According to RFC 4293, it is "OutOctets" counted with "OutTransmits" but not "OutRequests". "OutRequests" does not include any datagrams counted in "ForwDatagrams". ipSystemStatsOutOctets OBJECT-TYPE DESCRIPTION "The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipIfStatsOutTransmits MUST be counted here. ipSystemStatsOutRequests OBJECT-TYPE DESCRIPTION "The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipSystemStatsOutForwDatagrams. So do patch to define IPSTATS_MIB_OUTPKTS to "OutTransmits" and add IPSTATS_MIB_OUTREQUESTS for "OutRequests". Add IPSTATS_MIB_OUTREQUESTS counter in __ip_local_out() for ipv4 and add IPSTATS_MIB_OUT counter in ip6_finish_output2() for ipv6. Test result with patch: Before IP data is sent. ---------------------------------------------------------------------- root@qemux86-64:~# cat /proc/net/snmp Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates OutTransmits Ip: 1 64 9 0 5 1 0 0 3 3 0 0 0 0 0 0 0 0 0 4 ...... root@qemux86-64:~# cat /proc/net/netstat ...... IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts InECT0Pkts InCEPkts ReasmOverlaps IpExt: 0 0 0 0 0 0 2976 1896 0 0 0 0 0 9 0 0 0 0 ---------------------------------------------------------------------- After IP data is sent. ---------------------------------------------------------------------- root@qemux86-64:~# cat /proc/net/snmp Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates OutTransmits Ip: 1 64 10 0 5 2 0 0 3 3 0 0 0 0 0 0 0 0 0 5 ...... root@qemux86-64:~# cat /proc/net/netstat ...... IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts InECT0Pkts InCEPkts ReasmOverlaps IpExt: 0 0 0 0 0 0 4404 3324 0 0 0 0 0 10 0 0 0 0 ---------------------------------------------------------------------- "ForwDatagrams" increase from 1 to 2 and "OutRequests" is keeping 3. "OutTransmits" increase from 4 to 5 and "OutOctets" increase 1428. Signed-off-by: Heng Guo <heng.guo@windriver.com> Reviewed-by: Kun Song <Kun.Song@windriver.com> Reviewed-by: Filip Pudak <filip.pudak@windriver.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Reported-by: Vitezslav Samel <vitezslav@samel.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b4a11b2033b7d3dfdd46592f7036a775b18cecd1 upstream.

Reproduce environment:
network with 3 VM linuxs is connected as below:
VM1<---->VM2(latest kernel 6.5.0-rc7)<---->VM3
VM1: eth0 ip: 192.168.122.207 MTU 1500
VM2: eth0 ip: 192.168.122.208, eth1 ip: 192.168.123.224 MTU 1500
VM3: eth0 ip: 192.168.123.240 MTU 1500

Reproduce:
VM1 send 1400 bytes UDP data to VM3 using tools scapy with flags=0.
scapy command:
send(IP(dst="192.168.123.240",flags=0)/UDP()/str('0'*1400),count=1,
inter=1.000000)

Result:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates
Ip: 1 64 11 0 3 4 0 0 4 7 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates
Ip: 1 64 12 0 3 5 0 0 4 8 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
"ForwDatagrams" increase from 4 to 5 and "OutRequests" also increase
from 7 to 8.

Issue description and patch:
IPSTATS_MIB_OUTPKTS("OutRequests") is counted with IPSTATS_MIB_OUTOCTETS
("OutOctets") in ip_finish_output2().
According to RFC 4293, it is "OutOctets" counted with "OutTransmits" but
not "OutRequests". "OutRequests" does not include any datagrams counted
in "ForwDatagrams".
ipSystemStatsOutOctets OBJECT-TYPE
    DESCRIPTION
           "The total number of octets in IP datagrams delivered to the
            lower layers for transmission.  Octets from datagrams
            counted in ipIfStatsOutTransmits MUST be counted here.
ipSystemStatsOutRequests OBJECT-TYPE
    DESCRIPTION
           "The total number of IP datagrams that local IP user-
            protocols (including ICMP) supplied to IP in requests for
            transmission.  Note that this counter does not include any
            datagrams counted in ipSystemStatsOutForwDatagrams.
So do patch to define IPSTATS_MIB_OUTPKTS to "OutTransmits" and add
IPSTATS_MIB_OUTREQUESTS for "OutRequests".
Add IPSTATS_MIB_OUTREQUESTS counter in __ip_local_out() for ipv4 and add
IPSTATS_MIB_OUT counter in ip6_finish_output2() for ipv6.

Test result with patch:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 9 0 5 1 0 0 3 3 0 0 0 0 0 0 0 0 0 4
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
  OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
  InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
  InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 2976 1896 0 0 0 0 0 9 0 0 0 0
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 10 0 5 2 0 0 3 3 0 0 0 0 0 0 0 0 0 5
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
  OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
  InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
  InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 4404 3324 0 0 0 0 0 10 0 0 0 0
----------------------------------------------------------------------
"ForwDatagrams" increase from 1 to 2 and "OutRequests" is keeping 3.
"OutTransmits" increase from 4 to 5 and "OutOctets" increase 1428.

Signed-off-by: Heng Guo <heng.guo@windriver.com>
Reviewed-by: Kun Song <Kun.Song@windriver.com>
Reviewed-by: Filip Pudak <filip.pudak@windriver.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Vitezslav Samel <vitezslav@samel.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: esp: fix bad handling of pages from page_pool 2024-04-03T13:28:35+00:00 Dragos Tatulea dtatulea@nvidia.com 2024-03-08T15:26:00+00:00 8291b4eac429c480386669444c6377573f5d8664 [ Upstream commit c3198822c6cb9fb588e446540485669cc81c5d34 ] When the skb is reorganized during esp_output (!esp->inline), the pages coming from the original skb fragments are supposed to be released back to the system through put_page. But if the skb fragment pages are originating from a page_pool, calling put_page on them will trigger a page_pool leak which will eventually result in a crash. This leak can be easily observed when using CONFIG_DEBUG_VM and doing ipsec + gre (non offloaded) forwarding: BUG: Bad page state in process ksoftirqd/16 pfn:1451b6 page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6 flags: 0x200000000000000(node=0|zone=2) page_type: 0xffffffff() raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000 raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000 page dumped because: page_pool leak Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core] CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x36/0x50 bad_page+0x70/0xf0 free_unref_page_prepare+0x27a/0x460 free_unref_page+0x38/0x120 esp_ssg_unref.isra.0+0x15f/0x200 esp_output_tail+0x66d/0x780 esp_xmit+0x2c5/0x360 validate_xmit_xfrm+0x313/0x370 ? validate_xmit_skb+0x1d/0x330 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x23e/0x350 __dev_queue_xmit+0x337/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x25e/0x580 iptunnel_xmit+0x19b/0x240 ip_tunnel_xmit+0x5fb/0xb60 ipgre_xmit+0x14d/0x280 [ip_gre] dev_hard_start_xmit+0xc3/0x1c0 __dev_queue_xmit+0x208/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x1ca/0x580 ip_sublist_rcv_finish+0x32/0x40 ip_sublist_rcv+0x1b2/0x1f0 ? ip_rcv_finish_core.constprop.0+0x460/0x460 ip_list_rcv+0x103/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x1b3/0x2c0 napi_gro_receive+0xc8/0x200 gro_cell_poll+0x52/0x90 __napi_poll+0x25/0x1a0 net_rx_action+0x28e/0x300 __do_softirq+0xc3/0x276 ? sort_range+0x20/0x20 run_ksoftirqd+0x1e/0x30 smpboot_thread_fn+0xa6/0x130 kthread+0xcd/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x31/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> The suggested fix is to introduce a new wrapper (skb_page_unref) that covers page refcounting for page_pool pages as well. Cc: stable@vger.kernel.org Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling") Reported-and-tested-by: Anatoli N.Chechelnickiy <Anatoli.Chechelnickiy@m.interpipe.biz> Reported-by: Ian Kumlien <ian.kumlien@gmail.com> Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.com Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c3198822c6cb9fb588e446540485669cc81c5d34 ]

When the skb is reorganized during esp_output (!esp->inline), the pages
coming from the original skb fragments are supposed to be released back
to the system through put_page. But if the skb fragment pages are
originating from a page_pool, calling put_page on them will trigger a
page_pool leak which will eventually result in a crash.

This leak can be easily observed when using CONFIG_DEBUG_VM and doing
ipsec + gre (non offloaded) forwarding:

  BUG: Bad page state in process ksoftirqd/16  pfn:1451b6
  page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6
  flags: 0x200000000000000(node=0|zone=2)
  page_type: 0xffffffff()
  raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000
  raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000
  page dumped because: page_pool leak
  Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core]
  CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x36/0x50
   bad_page+0x70/0xf0
   free_unref_page_prepare+0x27a/0x460
   free_unref_page+0x38/0x120
   esp_ssg_unref.isra.0+0x15f/0x200
   esp_output_tail+0x66d/0x780
   esp_xmit+0x2c5/0x360
   validate_xmit_xfrm+0x313/0x370
   ? validate_xmit_skb+0x1d/0x330
   validate_xmit_skb_list+0x4c/0x70
   sch_direct_xmit+0x23e/0x350
   __dev_queue_xmit+0x337/0xba0
   ? nf_hook_slow+0x3f/0xd0
   ip_finish_output2+0x25e/0x580
   iptunnel_xmit+0x19b/0x240
   ip_tunnel_xmit+0x5fb/0xb60
   ipgre_xmit+0x14d/0x280 [ip_gre]
   dev_hard_start_xmit+0xc3/0x1c0
   __dev_queue_xmit+0x208/0xba0
   ? nf_hook_slow+0x3f/0xd0
   ip_finish_output2+0x1ca/0x580
   ip_sublist_rcv_finish+0x32/0x40
   ip_sublist_rcv+0x1b2/0x1f0
   ? ip_rcv_finish_core.constprop.0+0x460/0x460
   ip_list_rcv+0x103/0x130
   __netif_receive_skb_list_core+0x181/0x1e0
   netif_receive_skb_list_internal+0x1b3/0x2c0
   napi_gro_receive+0xc8/0x200
   gro_cell_poll+0x52/0x90
   __napi_poll+0x25/0x1a0
   net_rx_action+0x28e/0x300
   __do_softirq+0xc3/0x276
   ? sort_range+0x20/0x20
   run_ksoftirqd+0x1e/0x30
   smpboot_thread_fn+0xa6/0x130
   kthread+0xcd/0x100
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork+0x31/0x50
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork_asm+0x11/0x20
   </TASK>

The suggested fix is to introduce a new wrapper (skb_page_unref) that
covers page refcounting for page_pool pages as well.

Cc: stable@vger.kernel.org
Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling")
Reported-and-tested-by: Anatoli N.Chechelnickiy <Anatoli.Chechelnickiy@m.interpipe.biz>
Reported-by: Ian Kumlien <ian.kumlien@gmail.com>
Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mac802154: fix llsec key resources release in mac802154_llsec_key_del 2024-04-03T13:28:27+00:00 Fedor Pchelkin pchelkin@ispras.ru 2024-02-28T16:38:39+00:00 20d3e1c8a1847497269f04d874b2a5818ec29e2d [ Upstream commit e8a1e58345cf40b7b272e08ac7b32328b2543e40 ] mac802154_llsec_key_del() can free resources of a key directly without following the RCU rules for waiting before the end of a grace period. This may lead to use-after-free in case llsec_lookup_key() is traversing the list of keys in parallel with a key deletion: refcount_t: addition on 0; use-after-free. WARNING: CPU: 4 PID: 16000 at lib/refcount.c:25 refcount_warn_saturate+0x162/0x2a0 Modules linked in: CPU: 4 PID: 16000 Comm: wpan-ping Not tainted 6.7.0 #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x162/0x2a0 Call Trace: <TASK> llsec_lookup_key.isra.0+0x890/0x9e0 mac802154_llsec_encrypt+0x30c/0x9c0 ieee802154_subif_start_xmit+0x24/0x1e0 dev_hard_start_xmit+0x13e/0x690 sch_direct_xmit+0x2ae/0xbc0 __dev_queue_xmit+0x11dd/0x3c20 dgram_sendmsg+0x90b/0xd60 __sys_sendto+0x466/0x4c0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x45/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Also, ieee802154_llsec_key_entry structures are not freed by mac802154_llsec_key_del(): unreferenced object 0xffff8880613b6980 (size 64): comm "iwpan", pid 2176, jiffies 4294761134 (age 60.475s) hex dump (first 32 bytes): 78 0d 8f 18 80 88 ff ff 22 01 00 00 00 00 ad de x......."....... 00 00 00 00 00 00 00 00 03 00 cd ab 00 00 00 00 ................ backtrace: [<ffffffff81dcfa62>] __kmem_cache_alloc_node+0x1e2/0x2d0 [<ffffffff81c43865>] kmalloc_trace+0x25/0xc0 [<ffffffff88968b09>] mac802154_llsec_key_add+0xac9/0xcf0 [<ffffffff8896e41a>] ieee802154_add_llsec_key+0x5a/0x80 [<ffffffff8892adc6>] nl802154_add_llsec_key+0x426/0x5b0 [<ffffffff86ff293e>] genl_family_rcv_msg_doit+0x1fe/0x2f0 [<ffffffff86ff46d1>] genl_rcv_msg+0x531/0x7d0 [<ffffffff86fee7a9>] netlink_rcv_skb+0x169/0x440 [<ffffffff86ff1d88>] genl_rcv+0x28/0x40 [<ffffffff86fec15c>] netlink_unicast+0x53c/0x820 [<ffffffff86fecd8b>] netlink_sendmsg+0x93b/0xe60 [<ffffffff86b91b35>] ____sys_sendmsg+0xac5/0xca0 [<ffffffff86b9c3dd>] ___sys_sendmsg+0x11d/0x1c0 [<ffffffff86b9c65a>] __sys_sendmsg+0xfa/0x1d0 [<ffffffff88eadbf5>] do_syscall_64+0x45/0xf0 [<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 Handle the proper resource release in the RCU callback function mac802154_llsec_key_del_rcu(). Note that if llsec_lookup_key() finds a key, it gets a refcount via llsec_key_get() and locally copies key id from key_entry (which is a list element). So it's safe to call llsec_key_put() and free the list entry after the RCU grace period elapses. Found by Linux Verification Center (linuxtesting.org). Fixes: 5d637d5aabd8 ("mac802154: add llsec structures and mutators") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Alexander Aring <aahringo@redhat.com> Message-ID: <20240228163840.6667-1-pchelkin@ispras.ru> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e8a1e58345cf40b7b272e08ac7b32328b2543e40 ]

mac802154_llsec_key_del() can free resources of a key directly without
following the RCU rules for waiting before the end of a grace period. This
may lead to use-after-free in case llsec_lookup_key() is traversing the
list of keys in parallel with a key deletion:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 4 PID: 16000 at lib/refcount.c:25 refcount_warn_saturate+0x162/0x2a0
Modules linked in:
CPU: 4 PID: 16000 Comm: wpan-ping Not tainted 6.7.0 #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:refcount_warn_saturate+0x162/0x2a0
Call Trace:
 <TASK>
 llsec_lookup_key.isra.0+0x890/0x9e0
 mac802154_llsec_encrypt+0x30c/0x9c0
 ieee802154_subif_start_xmit+0x24/0x1e0
 dev_hard_start_xmit+0x13e/0x690
 sch_direct_xmit+0x2ae/0xbc0
 __dev_queue_xmit+0x11dd/0x3c20
 dgram_sendmsg+0x90b/0xd60
 __sys_sendto+0x466/0x4c0
 __x64_sys_sendto+0xe0/0x1c0
 do_syscall_64+0x45/0xf0
 entry_SYSCALL_64_after_hwframe+0x6e/0x76

Also, ieee802154_llsec_key_entry structures are not freed by
mac802154_llsec_key_del():

unreferenced object 0xffff8880613b6980 (size 64):
  comm "iwpan", pid 2176, jiffies 4294761134 (age 60.475s)
  hex dump (first 32 bytes):
    78 0d 8f 18 80 88 ff ff 22 01 00 00 00 00 ad de  x.......".......
    00 00 00 00 00 00 00 00 03 00 cd ab 00 00 00 00  ................
  backtrace:
    [<ffffffff81dcfa62>] __kmem_cache_alloc_node+0x1e2/0x2d0
    [<ffffffff81c43865>] kmalloc_trace+0x25/0xc0
    [<ffffffff88968b09>] mac802154_llsec_key_add+0xac9/0xcf0
    [<ffffffff8896e41a>] ieee802154_add_llsec_key+0x5a/0x80
    [<ffffffff8892adc6>] nl802154_add_llsec_key+0x426/0x5b0
    [<ffffffff86ff293e>] genl_family_rcv_msg_doit+0x1fe/0x2f0
    [<ffffffff86ff46d1>] genl_rcv_msg+0x531/0x7d0
    [<ffffffff86fee7a9>] netlink_rcv_skb+0x169/0x440
    [<ffffffff86ff1d88>] genl_rcv+0x28/0x40
    [<ffffffff86fec15c>] netlink_unicast+0x53c/0x820
    [<ffffffff86fecd8b>] netlink_sendmsg+0x93b/0xe60
    [<ffffffff86b91b35>] ____sys_sendmsg+0xac5/0xca0
    [<ffffffff86b9c3dd>] ___sys_sendmsg+0x11d/0x1c0
    [<ffffffff86b9c65a>] __sys_sendmsg+0xfa/0x1d0
    [<ffffffff88eadbf5>] do_syscall_64+0x45/0xf0
    [<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76

Handle the proper resource release in the RCU callback function
mac802154_llsec_key_del_rcu().

Note that if llsec_lookup_key() finds a key, it gets a refcount via
llsec_key_get() and locally copies key id from key_entry (which is a
list element). So it's safe to call llsec_key_put() and free the list
entry after the RCU grace period elapses.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 5d637d5aabd8 ("mac802154: add llsec structures and mutators")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Alexander Aring <aahringo@redhat.com>
Message-ID: <20240228163840.6667-1-pchelkin@ispras.ru>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>