linux-stable.git/net, branch v6.18.47

net: gro: properly validate BIG TCP aggregation criteria

2026-08-27T12:32:55+00:00

When GRO attempts to aggregate packets beyond GRO_LEGACY_MAX_SIZE (64KB),
BIG TCP should only be permitted for plain IPv4 TCP and plain IPv6 TCP
(with sufficient MAC header room to insert the temporary HBH jumbo header).

However, commit b1a78b9b9886 ("net: add support for ipv4 big tcp")
loosened the check in skb_gro_receive(), leading to several issues:

1. skb_gro_receive() checked skb_headroom(p) instead of the actual space
   before the MAC header (p->mac_header). Because skb_headroom(p) includes
   mac_len, crafted frames (e.g. injected via AF_PACKET) can pass the check
   with p->mac_header < 8 bytes. When ipv6_gro_complete() inserts the
   temporary HBH jumbo header, the memmove() starts before skb->head,
   causing an out-of-bounds write and wrapping skb->mac_header.
2. It allowed non-IP protocols such as software VLAN (ETH_P_8021Q /
   ETH_P_8021AD) to aggregate beyond 64KB because
   p->protocol != ETH_P_IPV6 was true.
3. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark,
   allowing encapsulated flows (e.g. SIT / IPv6-in-IPv4) to aggregate
   beyond 64KB.

Fix skb_gro_receive() to strictly enforce:
- NAPI_GRO_CB(skb)->proto == IPPROTO_TCP
- Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation)
- Protocol must be either ETH_P_IP or ETH_P_IPV6
- If ETH_P_IPV6, p->mac_header must be at least
  sizeof(struct hop_jumbo_hdr)

Returning -E2BIG from skb_gro_receive() ensures that packets which cannot
become BIG TCP are cleanly flushed at <= 64KB and delivered intact without
dropping.

This issue does not exist in mainline (7.0+) because the subsystem was
rewritten in commit 81be30c1f5f2 ("net/ipv6: Drop HBH for BIG TCP on RX
side"), making this fix relevant only for older stable branches like
6.18.y.

Fixes: 0fe79f28bfaf ("net: allow gro_max_size to exceed 65536")
Fixes: b1a78b9b9886 ("net: add support for ipv4 big tcp")
Reported-by: Sam Dlinn 
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: MGMT: reject HCI_CMD_SYNC params_len above 255

2026-08-27T12:32:54+00:00

commit 5d95286b6d6e8f1d304da7522bfa6860fc017e48 upstream.

mgmt_hci_cmd_sync() checks that the message length agrees with params_len
but puts no upper bound on it. params_len is __le16 while the parameter
length in the HCI command header is a u8:

	struct hci_command_hdr {
		__le16	opcode;
		__u8	plen;
	} __packed;

hci_cmd_sync_alloc() assigns one to the other:

	hdr->plen = plen;

	if (plen)
		skb_put_data(skb, param, plen);

so a params_len of 256 leaves plen at 0 while all 256 bytes are still
appended. The frame handed to the driver then declares no parameters and
carries 256 of them. On a length framed transport such as H:4 the
controller takes the trailing bytes as the start of the next packet.

The mgmt socket MTU is HCI_MAX_FRAME_SIZE, so params_len can reach about
1KB this way. Commit 03f1700b9b4d ("Bluetooth: MGMT: reject malformed
HCI_CMD_SYNC commands") only made params_len agree with the message
length, a value that fits the message but not the header field is still
accepted.

Reject params_len that does not fit the header field.

Fixes: 827af4787e74 ("Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: ISO: zero the sockaddr before returning it in getname

2026-08-27T12:32:54+00:00

commit 884cf2cc957da7ac178a0e6c6c69ddfec0481cc8 upstream.

iso_sock_getname() fills a struct sockaddr_iso in place and returns its
size without clearing it first, so bytes it does not write are copied to
user space from the kernel stack. The getsockname(2) and getpeername(2)
paths both run through do_getsockname(), which hands getname() an
uninitialized sockaddr_storage on the stack and copies back up to the
number of bytes getname() returns, so the driver has to initialize every
byte it accounts for.

Two ranges are left uninitialized:

  - struct sockaddr_iso is 10 bytes but only 9 are written (family,
    iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every
    call.

  - for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows
    by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and
    bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of
    that structure, are never written.

An unprivileged process can open a BTPROTO_ISO socket and reach the pad
leak with getsockname(); the broadcast leak needs an established BIS/PA
connection. l2cap and rfcomm already memset their sockaddr in getname
for the same reason; do the same here.

Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Fixes: 0a766a0affb5 ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: ISO: do not force BT_LISTEN after a failed BIG sync

2026-08-27T12:32:54+00:00

commit 9838a80096ba472d5e03057136a112631aabae6e upstream.

iso_sock_recvmsg() handles the deferred setup of a broadcast sink by
dropping the socket lock, calling iso_conn_big_sync() and taking the
lock again:

	release_sock(sk);
	iso_conn_big_sync(sk);
	lock_sock(sk);

	sk->sk_state = BT_LISTEN;

The state is written unconditionally, but iso_conn_big_sync() returns
void and has paths that do nothing at all: hci_get_route() may fail, and
after re-acquiring the socket lock the connection may already be gone,
in which case it bails out without ever issuing an LE BIG Create Sync.

While the lock is dropped the connection can be torn down, for example
when the controller reports HCI_EV_LE_PA_SYNC_LOST:

	hci_le_pa_sync_lost_evt()
	  hci_disconn_cfm() -> iso_disconn_cfm() -> iso_conn_del()
	    iso_chan_del()
	      iso_pi(sk)->conn = NULL
	      sk->sk_state = BT_CLOSED
	      sock_set_flag(sk, SOCK_ZAPPED)

iso_conn_big_sync() then finds conn == NULL and returns, but the caller
still overwrites the BT_CLOSED that iso_chan_del() has just set. The
socket ends up marked BT_LISTEN with no connection, so recvmsg() reports
success for a setup that never happened and a later accept() waits for
BIS connections that can never arrive instead of failing.

A concurrent shutdown() reaches the same write by another route:
__iso_sock_close() takes the BT_CONNECT2 PA sync path to
iso_sock_disconn(), which sets BT_DISCONN but leaves conn and
conn->hcon in place, so iso_conn_big_sync() succeeds and BT_LISTEN is
written over BT_DISCONN. Both the BT_CONNECT2 and the BT_CONNECTED case
write the state the same way.

Let iso_conn_big_sync() report whether the BIG sync was started, and
only move the socket to BT_LISTEN when it was and when the state has not
changed while the lock was dropped, mirroring what the BT_CONNECT case
of the same switch already does with iso_connect_cis(). Both conditions
are needed, the error alone does not cover the shutdown() race.

This corrupts the socket state machine only, it is not a memory safety
issue. KASAN and lockdep stayed quiet in all of the runs below.

Reproduced with an emulated controller over /dev/vhci on a KASAN +
PROVE_LOCKING kernel. A PA sync broadcast sink socket is driven to
BT_CONNECT2 and recvmsg() on it is raced against teardown, with a debug
delay inside the lock-dropped section to widen the window:

 - HCI_EV_LE_PA_SYNC_LOST injected: 64 of 64 rounds left the socket in
   BT_LISTEN with the connection gone, recvmsg() returned 0 and accept()
   on that fd returned EAGAIN, which iso_sock_accept() can only do while
   the socket is BT_LISTEN. With this patch, 0 of 64, recvmsg() returns
   an error and accept() returns EBADFD.

 - shutdown() instead of a controller event: 24 of 32 rounds wedged in
   BT_LISTEN, 0 of 32 with this patch. With only the error check in
   place and a short window, one round still wedged while recvmsg()
   returned 0, which is the case the state re-check covers.

An unraced control round behaves the same before and after: recvmsg()
returns 0, the socket reaches BT_LISTEN and an LE BIG Create Sync is
issued.

Fixes: 7a17308c1788 ("Bluetooth: iso: Fix circular lock in iso_conn_big_sync")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_sync: Fix accept list UAF during suspend

2026-08-27T12:32:54+00:00

commit f57b399c4fa1501b2d5451f52d861ece86bcf3db upstream.

hci_update_event_filter_sync() walks hdev->accept_list while sending a
synchronous HCI command for each remote-wakeup device.  The suspend path
holds hdev->req_lock, but accept-list updates are serialized by hdev->lock.
Consequently, remove_device() can free the current list entry during the
controller wait.

The following interleaving causes the use-after-free:

  hci_update_event_filter_sync()    remove_device()
  fetch accept-list entry
  hci_set_event_filter_sync()
    wait for controller response    hci_dev_lock()
                                    list_del()
                                    kfree()
                                    hci_dev_unlock()
  read the freed list.next

KASAN reported:

  BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910
  Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10
  Workqueue: events vhci_suspend_work
  Call Trace:
   hci_suspend_sync+0x835/0x910
   hci_suspend_dev+0x182/0x450
   process_one_work+0x661/0x1090
   worker_thread+0x45b/0xd10

  Allocated by task 86:
   hci_bdaddr_list_add_with_flags+0x1a8/0x400
   add_device+0x381/0x820
   hci_sock_sendmsg+0x1033/0x1ea0

  Freed by task 91:
   kfree+0x131/0x3c0
   remove_device+0x429/0xb70
   hci_sock_sendmsg+0x1033/0x1ea0

Snapshot the remote-wakeup addresses under hdev->lock.  Release the lock
before sending HCI commands.  Clear the controller event filter before
building the snapshot, and skip allocation and the second list traversal
when there are no matching entries.  This preserves the original filter
and scan-state updates without retaining an accept-list node across a
controller wait.

Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-bluetooth/20260730092331.2069741-1-nicoyip.dev@gmail.com/
Signed-off-by: Chengfeng Ye 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_event: validate LE Set CIG Parameters response

2026-08-27T12:32:54+00:00

commit 0acd4eeb4b225b9bebbf9ef96cc10cdd79b94899 upstream.

The Command Complete dispatch validates only the fixed part of the LE Set
CIG Parameters response. After that part is pulled from the skb,
hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the
trailing handle array.

Matching num_handles against the command's num_cis does not guarantee
that the response contains the advertised handles. A truncated response
from a malfunctioning controller can therefore make the handler read
beyond the skb data.

Validate that the remaining skb data contains all advertised handles.
Include this in the existing response validation so malformed responses
also follow the established CIG failure handling.

Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_event: fix LE list UAF on reset

2026-08-27T12:32:54+00:00

commit 33af47e847fe4a28b109673affb5874015d54f5a upstream.

hci_cc_reset() clears the LE accept and resolving lists without taking
hdev->lock. Other command-complete handlers serialize updates to these
lists with that lock, and the debugfs readers hold it while walking them.

This permits the reset completion and a debugfs read to interleave as
follows:

  hci_rx_work                 debugfs reader
  -----------                 --------------
                              lock hdev->lock
                              fetch current entry
  list_del(entry)
  kfree(entry)
                              read entry fields

The reader then dereferences a freed list entry and may follow its stale
next pointer.

KASAN reported:

  BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180
  Read of size 1 at addr ffff8881015dab16 by task poc/95

  Call Trace:
   white_list_show+0x15f/0x180
   seq_read_iter+0x3ff/0x1190
   seq_read+0x267/0x3d0
   vfs_read+0x177/0xa20
   ksys_read+0xf7/0x1c0

  Allocated by task 91:
   hci_bdaddr_list_add+0x1a6/0x3a0
   hci_cc_le_add_to_accept_list+0xab/0x140
   hci_cmd_complete_evt+0x26c/0x9a0
   hci_event_packet+0x454/0xb20
   hci_rx_work+0x293/0x730

  Freed by task 90:
   kfree+0x131/0x3c0
   hci_bdaddr_list_clear+0xd8/0x160
   hci_cc_reset+0x28a/0x370
   hci_cmd_complete_evt+0x26c/0x9a0
   hci_event_packet+0x454/0xb20
   hci_rx_work+0x293/0x730

Take hdev->lock around both list clears. This matches the existing
mutation and traversal locking convention.

Fixes: a4d5504d5c39 ("Bluetooth: Clear LE white list when resetting controller")
Fixes: cfdb0c2d095a ("Bluetooth: Store Resolv list size")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

xfrm: fix sk_dst_cache double-free in xfrm_user_policy()

2026-08-27T12:32:53+00:00

[ Upstream commit c283e9ada7fcb7dd4b10592623086b2e6d2f9925 ]

xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(),
i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with
rcu_dereference_protected(), stores NULL and dst_release()s the old dst.
That is only safe if no other thread modifies sk_dst_cache concurrently.

For a connected UDP socket that does not hold: the transmit fast path
(udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly
with an atomic xchg(). A per-socket policy change racing a send can make
both sides observe the same old dst and each dst_release() it, dropping
the socket's single reference twice and freeing the xfrm_dst bundle while
it is still referenced:

  BUG: KASAN: slab-use-after-free in dst_release
  Write of size 4 at addr ffff88801897b6c0 by task exploit/155
  Call Trace:
   ...
   dst_release (... ./include/linux/rcuref.h:109)
   xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053)
   do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347)
   ip_setsockopt (net/ipv4/ip_sockglue.c:1417)
   do_sock_setsockopt (net/socket.c:2368)
   __sys_setsockopt (net/socket.c:2393)
   __x64_sys_setsockopt (net/socket.c:2396)
   do_syscall_64 (arch/x86/entry/syscall_64.c:94)
   entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)

Reachable by an unprivileged user via a user+network namespace.

Use the atomic sk_dst_reset() so the cache is cleared and released with a
single xchg(): whichever side wins releases the dst once, the other sees
NULL and does nothing. Behaviour is otherwise unchanged.

Fixes: 2b06cdf3e688 ("xfrm: Clear sk_dst_cache when applying per-socket policy.")
Fixes: be8f8284cd89 ("net: xfrm: allow clearing socket xfrm policies.")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) 
Signed-off-by: Steffen Klassert 
Signed-off-by: Sasha Levin

mptcp: pm: fix memory leak from alloc-during-teardown race

2026-08-27T12:32:52+00:00

[ Upstream commit efc33b5102ff859bacd390a5f30112d8e0c084c0 ]

mptcp_pm_destroy() empties msk->pm.anno_list and
msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket
teardown, dropping the lock between the two.

A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock
reference via mptcp_token_get_sock() and, in
mptcp_pm_nl_announce_doit(), calls
mptcp_userspace_pm_append_new_local_addr() and
mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to
their respective lists. Because the genl handler holds a sock reference,
mptcp_pm_destroy() may run on the same msk via mptcp_disconnect(), which
invokes mptcp_destroy_common() without dropping the sock refcount,
before the handler completes.

If the lock acquisitions interleave such that mptcp_pm_destroy() empties
a list first, the later alloc adds its entry to a list head that nothing
else iterates for this msk, and the entry leaks. kmemleak reports both
mptcp_pm_add_addr objects (from mptcp_pm_announced_alloc()) and
mptcp_pm_addr_entry objects (from
mptcp_userspace_pm_append_new_local_addr()) under sustained concurrent
ANNOUNCE + close load against the userspace PM.

Add an MPTCP_PM_DESTROYING bit in msk->pm.status, set by
mptcp_pm_destroy() under pm.lock before the lists are emptied and
checked under pm.lock by the alloc paths. Either the alloc takes pm.lock
first, in which case its entry is on the list when mptcp_pm_destroy()
frees it; or mptcp_pm_destroy() takes pm.lock first, in which case the
later alloc observes the bit and refuses.

Found by an MPTCP protocol-flow harness extending BRF (arXiv:2305.08782).

Fixes: 9ab4807c84a4 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar 
Reviewed-by: Matthieu Baerts (NGI0) 
Signed-off-by: Matthieu Baerts (NGI0) 
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-6-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mptcp: pm: uniform announced addresses helpers

2026-08-27T12:32:52+00:00

[ Upstream commit 7d4dacc8ccca8e40fcb5f2ece9ea3e502da1bd3f ]

Similar to the previous commit, only using the 'add' or 'anno' prefixes
is confusing -- generally associated to the action of adding something,
or the Latin name for "year" -- and lack of uniformity.

This has been causing issues in the past, e.g. del_add_timer seemed to
suggest the goal is to delete a previously added timer.

Instead, use the mptcp_pm_announced_ prefix.

While at it, slightly improves some helpers:

- mptcp_lookup_anno_list_by_saddr: no need to specify what is used to do
  the lookup: mptcp_pm_announced_lookup.

- mptcp_pm_sport_in_anno_list: it doesn't just compare the port, but the
  whole address linked to the sublow: mptcp_pm_announced_has_ssk.

- mptcp_pm_alloc_anno_list: it allocates one item of the list, not a
  whole list: mptcp_pm_announced_alloc.

Reviewed-by: Mat Martineau 
Signed-off-by: Matthieu Baerts (NGI0) 
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-11-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski 
Stable-dep-of: efc33b5102ff ("mptcp: pm: fix memory leak from alloc-during-teardown race")
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman