linux-stable.git/net, branch v5.4.271

wifi: nl80211: reject iftype change with mesh ID change

2024-03-06T14:36:09+00:00

commit f78c1375339a291cba492a70eaf12ec501d28a8e upstream.

It's currently possible to change the mesh ID when the
interface isn't yet in mesh mode, at the same time as
changing it into mesh mode. This leads to an overwrite
of data in the wdev->u union for the interface type it
currently has, causing cfg80211_change_iface() to do
wrong things when switching.

We could probably allow setting an interface to mesh
while setting the mesh ID at the same time by doing a
different order of operations here, but realistically
there's no userspace that's going to do this, so just
disallow changes in iftype when setting mesh ID.

Cc: stable@vger.kernel.org
Fixes: 29cbe68c516a ("cfg80211/mac80211: add mesh join/leave commands")
Reported-by: syzbot+dd4779978217b1973180@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back

2024-03-06T14:36:09+00:00

[ Upstream commit 743ad091fb46e622f1b690385bb15e3cd3daf874 ]

In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.

if (have_flags)
    memcpy(nla_data(attr), &flags, sizeof(flags));
    // attr should point to IFLA_BRIDGE_FLAGS NLA !!!

Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.

This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.

Fixes: d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma 
Acked-by: Nikolay Aleksandrov 
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()

2024-03-06T14:36:09+00:00

[ Upstream commit 7e0f122c65912740327e4c54472acaa5f85868cb ]

Commit d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") added
some validation of NFPROTO_* families in the nft_compat module, but it broke
the ability to use legacy iptables modules in dual-stack nftables.

While with legacy iptables one had to independently manage IPv4 and IPv6
tables, with nftables it is possible to have dual-stack tables sharing the
rules. Moreover, it was possible to use rules based on legacy iptables
match/target modules in dual-stack nftables.

As an example, the program from [2] creates an INET dual-stack family table
using an xt_bpf based rule, which looks like the following (the actual output
was generated with a patched nft tool as the current nft tool does not parse
dual stack tables with legacy match rules, so consider it for illustrative
purposes only):

table inet testfw {
  chain input {
    type filter hook prerouting priority filter; policy accept;
    bytecode counter packets 0 bytes 0 accept
  }
}

After d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") we get
EOPNOTSUPP for the above program.

Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also
restrict the functions to classic iptables hooks.

Changes in v3:
  * clarify that upstream nft will not display such configuration properly and
    that the output was generated with a patched nft tool
  * remove example program from commit description and link to it instead
  * no code changes otherwise

Changes in v2:
  * restrict nft_(match/target)_validate() to classic iptables hooks
  * rewrite example program to use unmodified libnftnl

Fixes: d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family")
Link: https://lore.kernel.org/all/Zc1PfoWN38UuFJRI@calendula/T/#mc947262582c90fec044c7a3398cc92fac7afea72 [1]
Link: https://lore.kernel.org/all/20240220145509.53357-1-ignat@cloudflare.com/ [2]
Reported-by: Jordan Griege 
Signed-off-by: Ignat Korchagin 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

Bluetooth: Enforce validation on max value of connection interval

2024-03-06T14:36:09+00:00

[ Upstream commit e4b019515f950b4e6e5b74b2e1bb03a90cb33039 ]

Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Central
Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0]

That was revoled by commit c49a8682fc5d ("Bluetooth: validate BLE
connection interval updates"), but later got reverted due to devices
like keyboards and mice may require low connection interval.

So only validate the max value connection interval to pass the Test
Suite, and let devices to request low connection interval if needed.

[0] https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?doc_id=229869

Fixes: 68d19d7d9957 ("Revert "Bluetooth: validate BLE connection interval updates"")
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST

2024-03-06T14:36:09+00:00

[ Upstream commit 7e74aa53a68bf60f6019bd5d9a9a1406ec4d4865 ]

If we received HCI_EV_IO_CAPA_REQUEST while
HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote
does support SSP since otherwise this event shouldn't be generated.

Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+9UdG1cMZVmdtN3U2aS16AKMCyTARZZyFX7xTEDWcMOw@mail.gmail.com/T/#t
Fixes: c7f59461f5a7 ("Bluetooth: Fix a refcnt underflow problem for hci_conn")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: Avoid potential use-after-free in hci_error_reset

2024-03-06T14:36:09+00:00

[ Upstream commit 2449007d3f73b2842c9734f45f0aadb522daf592 ]

While handling the HCI_EV_HARDWARE_ERROR event, if the underlying
BT controller is not responding, the GPIO reset mechanism would
free the hci_dev and lead to a use-after-free in hci_error_reset.

Here's the call trace observed on a ChromeOS device with Intel AX201:
   queue_work_on+0x3e/0x6c
   __hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth ]
   ? init_wait_entry+0x31/0x31
   __hci_cmd_sync+0x16/0x20 [bluetooth ]
   hci_error_reset+0x4f/0xa4 [bluetooth ]
   process_one_work+0x1d8/0x33f
   worker_thread+0x21b/0x373
   kthread+0x13a/0x152
   ? pr_cont_work+0x54/0x54
   ? kthread_blkcg+0x31/0x31
    ret_from_fork+0x1f/0x30

This patch holds the reference count on the hci_dev while processing
a HCI_EV_HARDWARE_ERROR event to avoid potential crash.

Fixes: c7741d16a57c ("Bluetooth: Perform a power cycle when receiving hardware error event")
Signed-off-by: Ying Hsu 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

ipv6: fix potential "struct net" leak in inet6_rtm_getaddr()

2024-03-06T14:36:08+00:00

[ Upstream commit 10bfd453da64a057bcfd1a49fb6b271c48653cdb ]

It seems that if userspace provides a correct IFA_TARGET_NETNSID value
but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr()
returns -EINVAL with an elevated "struct net" refcount.

Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Signed-off-by: Eric Dumazet 
Cc: Christian Brauner 
Cc: David Ahern 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: ip_tunnel: prevent perpetual headroom growth

2024-03-06T14:36:08+00:00

[ Upstream commit 5ae1e9922bbdbaeb9cfbe91085ab75927488ac0f ]

syzkaller triggered following kasan splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191
[..]
 kasan_report+0xda/0x110 mm/kasan/report.c:588
 __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
 skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline]
 ___skb_get_hash net/core/flow_dissector.c:1791 [inline]
 __skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856
 skb_get_hash include/linux/skbuff.h:1556 [inline]
 ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748
 ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349
 dev_queue_xmit include/linux/netdevice.h:3134 [inline]
 neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592
 ...
 ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235
 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323
 ..
 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82
 ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831
 ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
 ...

The splat occurs because skb->data points past skb->head allocated area.
This is because neigh layer does:
  __skb_pull(skb, skb_network_offset(skb));

... but skb_network_offset() returns a negative offset and __skb_pull()
arg is unsigned.  IOW, we skb->data gets "adjusted" by a huge value.

The negative value is returned because skb->head and skb->data distance is
more than 64k and skb->network_header (u16) has wrapped around.

The bug is in the ip_tunnel infrastructure, which can cause
dev->needed_headroom to increment ad infinitum.

The syzkaller reproducer consists of packets getting routed via a gre
tunnel, and route of gre encapsulated packets pointing at another (ipip)
tunnel.  The ipip encapsulation finds gre0 as next output device.

This results in the following pattern:

1). First packet is to be sent out via gre0.
Route lookup found an output device, ipip0.

2).
ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future
output device, rt.dev->needed_headroom (ipip0).

3).
ip output / start_xmit moves skb on to ipip0. which runs the same
code path again (xmit recursion).

4).
Routing step for the post-gre0-encap packet finds gre0 as output device
to use for ipip0 encapsulated packet.

tunl0->needed_headroom is then incremented based on the (already bumped)
gre0 device headroom.

This repeats for every future packet:

gre0->needed_headroom gets inflated because previous packets' ipip0 step
incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0
needed_headroom was increased.

For each subsequent packet, gre/ipip0->needed_headroom grows until
post-expand-head reallocations result in a skb->head/data distance of
more than 64k.

Once that happens, skb->network_header (u16) wraps around when
pskb_expand_head tries to make sure that skb_network_offset() is unchanged
after the headroom expansion/reallocation.

After this skb_network_offset(skb) returns a different (and negative)
result post headroom expansion.

The next trip to neigh layer (or anything else that would __skb_pull the
network header) makes skb->data point to a memory location outside
skb->head area.

v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to
prevent perpetual increase instead of dropping the headroom increment
completely.

Reported-and-tested-by: syzbot+bfde3bef047a81b8fde6@syzkaller.appspotmail.com
Closes: https://groups.google.com/g/syzkaller-bugs/c/fL9G6GtWskY/m/VKk_PR5FBAAJ
Fixes: 243aad830e8a ("ip_gre: include route header_len in max_headroom calculation")
Signed-off-by: Florian Westphal 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20240220135606.4939-1-fw@strlen.de
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter

2024-03-06T14:36:08+00:00

[ Upstream commit 661779e1fcafe1b74b3f3fe8e980c1e207fea1fd ]

syzbot reported the following uninit-value access issue [1]:

netlink_to_full_skb() creates a new `skb` and puts the `skb->data`
passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data
size is specified as `len` and passed to skb_put_data(). This `len`
is based on `skb->end` that is not data offset but buffer offset. The
`skb->end` contains data and tailroom. Since the tailroom is not
initialized when the new `skb` created, KMSAN detects uninitialized
memory area when copying the data.

This patch resolved this issue by correct the len from `skb->end` to
`skb->len`, which is the actual data offset.

BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 copy_to_user_iter lib/iov_iter.c:24 [inline]
 iterate_ubuf include/linux/iov_iter.h:29 [inline]
 iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
 iterate_and_advance include/linux/iov_iter.h:271 [inline]
 _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186
 copy_to_iter include/linux/uio.h:197 [inline]
 simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532
 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420
 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546
 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline]
 packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482
 sock_recvmsg_nosec net/socket.c:1044 [inline]
 sock_recvmsg net/socket.c:1066 [inline]
 sock_read_iter+0x467/0x580 net/socket.c:1136
 call_read_iter include/linux/fs.h:2014 [inline]
 new_sync_read fs/read_write.c:389 [inline]
 vfs_read+0x8f6/0xe00 fs/read_write.c:470
 ksys_read+0x20f/0x4c0 fs/read_write.c:613
 __do_sys_read fs/read_write.c:623 [inline]
 __se_sys_read fs/read_write.c:621 [inline]
 __x64_sys_read+0x93/0xd0 fs/read_write.c:621
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was stored to memory at:
 skb_put_data include/linux/skbuff.h:2622 [inline]
 netlink_to_full_skb net/netlink/af_netlink.c:181 [inline]
 __netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline]
 __netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325
 netlink_deliver_tap net/netlink/af_netlink.c:338 [inline]
 netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline]
 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
 netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
 __sys_sendmsg net/socket.c:2667 [inline]
 __do_sys_sendmsg net/socket.c:2676 [inline]
 __se_sys_sendmsg net/socket.c:2674 [inline]
 __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 free_pages_prepare mm/page_alloc.c:1087 [inline]
 free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347
 free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533
 release_pages+0x23d3/0x2410 mm/swap.c:1042
 free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316
 tlb_batch_pages_flush mm/mmu_gather.c:98 [inline]
 tlb_flush_mmu_free mm/mmu_gather.c:293 [inline]
 tlb_flush_mmu+0x6f5/0x980 mm/mmu_gather.c:300
 tlb_finish_mmu+0x101/0x260 mm/mmu_gather.c:392
 exit_mmap+0x49e/0xd30 mm/mmap.c:3321
 __mmput+0x13f/0x530 kernel/fork.c:1349
 mmput+0x8a/0xa0 kernel/fork.c:1371
 exit_mm+0x1b8/0x360 kernel/exit.c:567
 do_exit+0xd57/0x4080 kernel/exit.c:858
 do_group_exit+0x2fd/0x390 kernel/exit.c:1021
 __do_sys_exit_group kernel/exit.c:1032 [inline]
 __se_sys_exit_group kernel/exit.c:1030 [inline]
 __x64_sys_exit_group+0x3c/0x50 kernel/exit.c:1030
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Bytes 3852-3903 of 3904 are uninitialized
Memory access of size 3904 starts at ffff88812ea1e000
Data copied to user address 0000000020003280

CPU: 1 PID: 5043 Comm: syz-executor297 Not tainted 6.7.0-rc5-syzkaller-00047-g5bd7ef53ffe5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023

Fixes: 1853c9496460 ("netlink, mmap: transform mmap skb into full skb on taps")
Reported-and-tested-by: syzbot+34ad5fab48f7bf510349@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34ad5fab48f7bf510349 [1]
Signed-off-by: Ryosuke Yasuoka 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20240221074053.1794118-1-ryasuoka@redhat.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

netfilter: nf_tables: set dormant flag on hook register failure

2024-03-01T12:13:37+00:00

[ Upstream commit bccebf64701735533c8db37773eeacc6566cc8ec ]

We need to set the dormant flag again if we fail to register
the hooks.

During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.

On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core.

Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin