linux-stable.git/net, branch v5.10.9

netfilter: nf_nat: Fix memleak in nf_nat_init

2021-01-19T17:27:33+00:00

commit 869f4fdaf4ca7bb6e0d05caf6fa1108dddc346a7 upstream.

When register_pernet_subsys() fails, nf_nat_bysource
should be freed just like when nf_ct_extend_register()
fails.

Fixes: 1cd472bf036ca ("netfilter: nf_nat: add nat hook register functions to nf_nat")
Signed-off-by: Dinghao Liu 
Acked-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

netfilter: conntrack: fix reading nf_conntrack_buckets

2021-01-19T17:27:33+00:00

commit f6351c3f1c27c80535d76cac2299aec44c36291e upstream.

The old way of changing the conntrack hashsize runtime was through changing
the module param via file /sys/module/nf_conntrack/parameters/hashsize. This
was extended to sysctl change in commit 3183ab8997a4 ("netfilter: conntrack:
allow increasing bucket size via sysctl too").

The commit introduced second "user" variable nf_conntrack_htable_size_user
which shadow actual variable nf_conntrack_htable_size. When hashsize is
changed via module param this "user" variable isn't updated. This results in
sysctl net/netfilter/nf_conntrack_buckets shows the wrong value when users
update via the old way.

This patch fix the issue by always updating "user" variable when reading the
proc file. This will take care of changes to the actual variable without
sysctl need to be aware.

Fixes: 3183ab8997a4 ("netfilter: conntrack: allow increasing bucket size via sysctl too")
Reported-by: Yoel Caspersen 
Signed-off-by: Jesper Dangaard Brouer 
Acked-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

net: sunrpc: interpret the return value of kstrtou32 correctly

2021-01-19T17:27:33+00:00

commit 86b53fbf08f48d353a86a06aef537e78e82ba721 upstream.

A return value of 0 means success. This is documented in lib/kstrtox.c.

This was found by trying to mount an NFS share from a link-local IPv6
address with the interface specified by its index:

  mount("[fe80::1%1]:/srv/nfs", "/mnt", "nfs", 0, "nolock,addr=fe80::1%1")

Before this commit this failed with EINVAL and also caused the following
message in dmesg:

  [...] NFS: bad IP address specified: addr=fe80::1%1

The syscall using the same address based on the interface name instead
of its index succeeds.

Credits for this patch go to my colleague Christian Speich, who traced
the origin of this bug to this line of code.

Signed-off-by: Johannes Nixdorf 
Fixes: 00cfaa943ec3 ("replace strict_strto calls")
Signed-off-by: Trond Myklebust 
Signed-off-by: Greg Kroah-Hartman

cfg80211: select CONFIG_CRC32

2021-01-19T17:27:28+00:00

[ Upstream commit 152a8a6c017bfdeda7f6d052fbc6e151891bd9b6 ]

Without crc32 support, this fails to link:

arm-linux-gnueabi-ld: net/wireless/scan.o: in function `cfg80211_scan_6ghz':
scan.c:(.text+0x928): undefined reference to `crc32_le'

Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

netfilter: ipset: fixes possible oops in mtype_resize

2021-01-19T17:27:23+00:00

[ Upstream commit 2b33d6ffa9e38f344418976b06057e2fc2aa9e2a ]

currently mtype_resize() can cause oops

        t = ip_set_alloc(htable_size(htable_bits));
        if (!t) {
                ret = -ENOMEM;
                goto out;
        }
        t->hregion = ip_set_alloc(ahash_sizeof_regions(htable_bits));

Increased htable_bits can force htable_size() to return 0.
In own turn ip_set_alloc(0) returns not 0 but ZERO_SIZE_PTR,
so follwoing access to t->hregion should trigger an OOPS.

Signed-off-by: Vasily Averin 
Acked-by: Jozsef Kadlecsik 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

net: drop bogus skb with CHECKSUM_PARTIAL and offset beyond end of trimmed packet

2021-01-17T13:17:06+00:00

commit 54970a2fbb673f090b7f02d7f57b10b2e0707155 upstream.

syzbot reproduces BUG_ON in skb_checksum_help():
tun creates (bogus) skb with huge partial-checksummed area and
small ip packet inside. Then ip_rcv trims the skb based on size
of internal ip packet, after that csum offset points beyond of
trimmed skb. Then checksum_tg() called via netfilter hook
triggers BUG_ON:

        offset = skb_checksum_start_offset(skb);
        BUG_ON(offset >= skb_headlen(skb));

To work around the problem this patch forces pskb_trim_rcsum_slow()
to return -EINVAL in described scenario. It allows its callers to
drop such kind of packets.

Link: https://syzkaller.appspot.com/bug?id=b419a5ca95062664fe1a60b764621eb4526e2cd0
Reported-by: syzbot+7010af67ced6105e5ab6@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin 
Acked-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/1b2494af-2c56-8ee2-7bc0-923fcad1cdf8@virtuozzo.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

can: isotp: isotp_getname(): fix kernel information leak

2021-01-17T13:17:05+00:00

commit b42b3a2744b3e8f427de79896720c72823af91ad upstream.

Initialize the sockaddr_can structure to prevent a data leak to user space.

Suggested-by: Cong Wang 
Reported-by: syzbot+057884e2f453e8afebc8@syzkaller.appspotmail.com
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Signed-off-by: Oliver Hartkopp 
Link: https://lore.kernel.org/r/20210112091643.11789-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

xsk: Rollback reservation at NETDEV_TX_BUSY

2021-01-17T13:17:05+00:00

commit b1b95cb5c0a9694d47d5f845ba97e226cfda957d upstream.

Rollback the reservation in the completion ring when we get a
NETDEV_TX_BUSY. When this error is received from the driver, we are
supposed to let the user application retry the transmit again. And in
order to do this, we need to roll back the failed send so it can be
retried. Unfortunately, we did not cancel the reservation we had made
in the completion ring. By not doing this, we actually make the
completion ring one entry smaller per NETDEV_TX_BUSY error we get, and
after enough of these errors the completion ring will be of size zero
and transmit will stop working.

Fix this by cancelling the reservation when we get a NETDEV_TX_BUSY
error.

Fixes: 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
Reported-by: Xuan Zhuo 
Signed-off-by: Magnus Karlsson 
Signed-off-by: Daniel Borkmann 
Acked-by: Björn Töpel 
Link: https://lore.kernel.org/bpf/20201218134525.13119-3-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman

xsk: Fix race in SKB mode transmit with shared cq

2021-01-17T13:17:05+00:00

commit f09ced4053bc0a2094a12b60b646114c966ef4c6 upstream.

Fix a race when multiple sockets are simultaneously calling sendto()
when the completion ring is shared in the SKB case. This is the case
when you share the same netdev and queue id through the
XDP_SHARED_UMEM bind flag. The problem is that multiple processes can
be in xsk_generic_xmit() and call the backpressure mechanism in
xskq_prod_reserve(xs->pool->cq). As this is a shared resource in this
specific scenario, a race might occur since the rings are
single-producer single-consumer.

Fix this by moving the tx_completion_lock from the socket to the pool
as the pool is shared between the sockets that share the completion
ring. (The pool is not shared when this is not the case.) And then
protect the accesses to xskq_prod_reserve() with this lock. The
tx_completion_lock is renamed cq_lock to better reflect that it
protects accesses to the potentially shared completion ring.

Fixes: 35fcde7f8deb ("xsk: support for Tx")
Reported-by: Xuan Zhuo 
Signed-off-by: Magnus Karlsson 
Signed-off-by: Daniel Borkmann 
Acked-by: Björn Töpel 
Link: https://lore.kernel.org/bpf/20201218134525.13119-2-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman

nexthop: Bounce NHA_GATEWAY in FDB nexthop groups

2021-01-17T13:16:57+00:00

[ Upstream commit b19218b27f3477316d296e8bcf4446aaf017aa69 ]

The function nh_check_attr_group() is called to validate nexthop groups.
The intention of that code seems to have been to bounce all attributes
above NHA_GROUP_TYPE except for NHA_FDB. However instead it bounces all
these attributes except when NHA_FDB attribute is present--then it accepts
them.

NHA_FDB validation that takes place before, in rtm_to_nh_config(), already
bounces NHA_OIF, NHA_BLACKHOLE, NHA_ENCAP and NHA_ENCAP_TYPE. Yet further
back, NHA_GROUPS and NHA_MASTER are bounced unconditionally.

But that still leaves NHA_GATEWAY as an attribute that would be accepted in
FDB nexthop groups (with no meaning), so long as it keeps the address
family as unspecified:

 # ip nexthop add id 1 fdb via 127.0.0.1
 # ip nexthop add id 10 fdb via default group 1

The nexthop code is still relatively new and likely not used very broadly,
and the FDB bits are newer still. Even though there is a reproducer out
there, it relies on an improbable gateway arguments "via default", "via
all" or "via any". Given all this, I believe it is OK to reformulate the
condition to do the right thing and bounce NHA_GATEWAY.

Fixes: 38428d68719c ("nexthop: support for fdb ecmp nexthops")
Signed-off-by: Petr Machata 
Signed-off-by: Ido Schimmel 
Reviewed-by: David Ahern 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman