linux-stable.git/net, branch v4.9.3

nl80211: Use different attrs for BSSID and random MAC addr in scan req

2017-01-12T10:39:23+00:00

commit 2fa436b3a2a7009c11a3bc03fe0ff4c26e80fd87 upstream.

NL80211_ATTR_MAC was used to set both the specific BSSID to be scanned
and the random MAC address to be used when privacy is enabled. When both
the features are enabled, both the BSSID and the local MAC address were
getting same value causing Probe Request frames to go with unintended
DA. Hence, this has been fixed by using a different NL80211_ATTR_BSSID
attribute to set the specific BSSID (which was the more recent addition
in cfg80211) for a scan.

Backwards compatibility with old userspace software is maintained to
some extent by allowing NL80211_ATTR_MAC to be used to set the specific
BSSID when scanning without enabling random MAC address use.

Scanning with random source MAC address was introduced by commit
ad2b26abc157 ("cfg80211: allow drivers to support random MAC addresses
for scan") and the issue was introduced with the addition of the second
user for the same attribute in commit 818965d39177 ("cfg80211: Allow a
scan request for a specific BSSID").

Fixes: 818965d39177 ("cfg80211: Allow a scan request for a specific BSSID")
Signed-off-by: Vamsi Krishna 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

mac80211: fix tid_agg_rx NULL dereference

2017-01-12T10:39:23+00:00

commit 1c3d185a9a0b136a58e73b02912d593d0303d1da upstream.

On drivers setting the SUPPORTS_REORDERING_BUFFER hardware flag,
we crash when the peer sends an AddBA request while we already
have a session open on the seame TID; this is because on those
drivers, the tid_agg_rx is left NULL even though the session is
valid, and the agg_session_valid bit is set.

To fix this, store the dialog tokens outside the tid_agg_rx to
be able to compare them to the received AddBA request.

Fixes: f89e07d4cf26 ("mac80211: agg-rx: refuse ADDBA Request with timeout update")
Reported-by: Emmanuel Grumbach 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

mac80211: initialize fast-xmit 'info' later

2017-01-12T10:39:07+00:00

commit 35f432a03e41d3bf08c51ede917f94e2288fbe8c upstream.

In ieee80211_xmit_fast(), 'info' is initialized to point to the skb
that's passed in, but that skb may later be replaced by a clone (if
it was shared), leading to an invalid pointer.

This can lead to use-after-free and also later crashes since the
real SKB's info->hw_queue doesn't get initialized properly.

Fix this by assigning info only later, when it's needed, after the
skb replacement (may have) happened.

Reported-by: Ben Greear 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

SUNRPC: fix refcounting problems with auth_gss messages.

2017-01-09T07:32:25+00:00

commit 1cded9d2974fe4fe339fc0ccd6638b80d465ab2c upstream.

There are two problems with refcounting of auth_gss messages.

First, the reference on the pipe->pipe list (taken by a call
to rpc_queue_upcall()) is not counted.  It seems to be
assumed that a message in pipe->pipe will always also be in
pipe->in_downcall, where it is correctly reference counted.

However there is no guaranty of this.  I have a report of a
NULL dereferences in rpc_pipe_read() which suggests a msg
that has been freed is still on the pipe->pipe list.

One way I imagine this might happen is:
- message is queued for uid=U and auth->service=S1
- rpc.gssd reads this message and starts processing.
  This removes the message from pipe->pipe
- message is queued for uid=U and auth->service=S2
- rpc.gssd replies to the first message. gss_pipe_downcall()
  calls __gss_find_upcall(pipe, U, NULL) and it finds the
  *second* message, as new messages are placed at the head
  of ->in_downcall, and the service type is not checked.
- This second message is removed from ->in_downcall and freed
  by gss_release_msg() (even though it is still on pipe->pipe)
- rpc.gssd tries to read another message, and dereferences a pointer
  to this message that has just been freed.

I fix this by incrementing the reference count before calling
rpc_queue_upcall(), and decrementing it if that fails, or normally in
gss_pipe_destroy_msg().

It seems strange that the reply doesn't target the message more
precisely, but I don't know all the details.  In any case, I think the
reference counting irregularity became a measureable bug when the
extra arg was added to __gss_find_upcall(), hence the Fixes: line
below.

The second problem is that if rpc_queue_upcall() fails, the new
message is not freed. gss_alloc_msg() set the ->count to 1,
gss_add_msg() increments this to 2, gss_unhash_msg() decrements to 1,
then the pointer is discarded so the memory never gets freed.

Fixes: 9130b8dbc6ac ("SUNRPC: allow for upcalls for same uid but different gss service")
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1011250
Signed-off-by: NeilBrown 
Signed-off-by: Trond Myklebust 
Signed-off-by: Greg Kroah-Hartman

libceph: verify authorize reply on connect

2017-01-09T07:32:24+00:00

commit 5c056fdc5b474329037f2aa18401bd73033e0ce0 upstream.

After sending an authorizer (ceph_x_authorize_a + ceph_x_authorize_b),
the client gets back a ceph_x_authorize_reply, which it is supposed to
verify to ensure the authenticity and protect against replay attacks.
The code for doing this is there (ceph_x_verify_authorizer_reply(),
ceph_auth_verify_authorizer_reply() + plumbing), but it is never
invoked by the the messenger.

AFAICT this goes back to 2009, when ceph authentication protocols
support was added to the kernel client in 4e7a5dcd1bba ("ceph:
negotiate authentication protocol; implement AUTH_NONE protocol").

The second param of ceph_connection_operations::verify_authorizer_reply
is unused all the way down.  Pass 0 to facilitate backporting, and kill
it in the next commit.

Signed-off-by: Ilya Dryomov 
Reviewed-by: Sage Weil 
Signed-off-by: Greg Kroah-Hartman

vsock/virtio: fix src/dst cid format

2017-01-09T07:32:23+00:00

commit f83f12d660d11718d3eed9d979ee03e83aa55544 upstream.

These fields are 64 bit, using le32_to_cpu and friends
on these will not do the right thing.
Fix this up.

Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Greg Kroah-Hartman

cfg80211/mac80211: fix BSS leaks when abandoning assoc attempts

2017-01-09T07:32:17+00:00

commit e6f462df9acd2a3295e5d34eb29e2823220cf129 upstream.

When mac80211 abandons an association attempt, it may free
all the data structures, but inform cfg80211 and userspace
about it only by sending the deauth frame it received, in
which case cfg80211 has no link to the BSS struct that was
used and will not cfg80211_unhold_bss() it.

Fix this by providing a way to inform cfg80211 of this with
the BSS entry passed, so that it can clean up properly, and
use this ability in the appropriate places in mac80211.

This isn't ideal: some code is more or less duplicated and
tracing is missing. However, it's a fairly small change and
it's thus easier to backport - cleanups can come later.

Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

can: raw: raw_setsockopt: limit number of can_filter that can be set

2016-12-07T09:45:57+00:00

This patch adds a check to limit the number of can_filters that can be
set via setsockopt on CAN_RAW sockets. Otherwise allocations > MAX_ORDER
are not prevented resulting in a warning.

Reference: https://lkml.org/lkml/2016/12/2/230

Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Cc: linux-stable 
Signed-off-by: Marc Kleine-Budde

tcp: warn on bogus MSS and try to amend it

2016-12-06T16:01:19+00:00

There have been some reports lately about TCP connection stalls caused
by NIC drivers that aren't setting gso_size on aggregated packets on rx
path. This causes TCP to assume that the MSS is actually the size of the
aggregated packet, which is invalid.

Although the proper fix is to be done at each driver, it's often hard
and cumbersome for one to debug, come to such root cause and report/fix
it.

This patch amends this situation in two ways. First, it adds a warning
on when this situation occurs, so it gives a hint to those trying to
debug this. It also limit the maximum probed MSS to the adverised MSS,
as it should never be any higher than that.

The result is that the connection may not have the best performance ever
but it shouldn't stall, and the admin will have a hint on what to look
for.

Tested with virtio by forcing gso_size to 0.

v2: updated msg per David's suggestion
v3: use skb_iif to find the interface and also log its name, per Eric
    Dumazet's suggestion. As the skb may be backlogged and the interface
    gone by then, we need to check if the number still has a meaning.
v4: use helper tcp_gro_dev_warn() and avoid pr_warn_once inside __once, per
    David's suggestion

Cc: Jonathan Maxwell 
Signed-off-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller

netlink: Do not schedule work from sk_destruct

2016-12-06T00:43:42+00:00

It is wrong to schedule a work from sk_destruct using the socket
as the memory reserve because the socket will be freed immediately
after the return from sk_destruct.

Instead we should do the deferral prior to sk_free.

This patch does just that.

Fixes: 707693c8a498 ("netlink: Call cb->done from a worker thread")
Signed-off-by: Herbert Xu 
Tested-by: Andrey Konovalov 
Signed-off-by: David S. Miller