linux-stable.git/net, branch v4.4.72

net: better skb->sender_cpu and skb->napi_id cohabitation

2017-06-14T11:16:26+00:00

commit 52bd2d62ce6758d811edcbd2256eb9ea7f6a56cb upstream.

skb->sender_cpu and skb->napi_id share a common storage,
and we had various bugs about this.

We had to call skb_sender_cpu_clear() in some places to
not leave a prior skb->napi_id and fool netdev_pick_tx()

As suggested by Alexei, we could split the space so that
these errors can not happen.

0 value being reserved as the common (not initialized) value,
let's reserve [1 .. NR_CPUS] range for valid sender_cpu,
and [NR_CPUS+1 .. ~0U] for valid napi_id.

This will allow proper busy polling support over tunnels.

Signed-off-by: Eric Dumazet 
Suggested-by: Alexei Starovoitov 
Acked-by: Alexei Starovoitov 
Signed-off-by: David S. Miller 
Cc: Paul Menzel 
Signed-off-by: Greg Kroah-Hartman

net: bridge: start hello timer only if device is up

2017-06-14T11:16:19+00:00

[ Upstream commit aeb073241fe7a2b932e04e20c60e47718332877f ]

When the transition of NO_STP -> KERNEL_STP was fixed by always calling
mod_timer in br_stp_start, it introduced a new regression which causes
the timer to be armed even when the bridge is down, and since we stop
the timers in its ndo_stop() function, they never get disabled if the
device is destroyed before it's upped.

To reproduce:
$ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on;
ip l del br0; done;

CC: Xin Long 
CC: Ivan Vecera 
CC: Sebastian Ott 
Reported-by: Sebastian Ott 
Fixes: 6d18c732b95c ("bridge: start hello_timer when enabling KERNEL_STP in br_stp_start")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ping: do not abuse udp_poll()

2017-06-14T11:16:19+00:00

[ Upstream commit 77d4b1d36926a9b8387c6b53eeba42bcaaffcea3 ]

Alexander reported various KASAN messages triggered in recent kernels

The problem is that ping sockets should not use udp_poll() in the first
place, and recent changes in UDP stack finally exposed this old bug.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.")
Signed-off-by: Eric Dumazet 
Reported-by: Sasha Levin 
Cc: Solar Designer 
Cc: Vasiliy Kulikov 
Cc: Lorenzo Colitti 
Acked-By: Lorenzo Colitti 
Tested-By: Lorenzo Colitti 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: Fix leak in ipv6_gso_segment().

2017-06-14T11:16:19+00:00

[ Upstream commit e3e86b5119f81e5e2499bea7ea1ebe8ac6aab789 ]

If ip6_find_1stfragopt() fails and we return an error we have to free
up 'segs' because nobody else is going to.

Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options")
Reported-by: Ben Hutchings 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: disallow cwnd undo when switching congestion control

2017-06-14T11:16:19+00:00

[ Upstream commit 44abafc4cc094214a99f860f778c48ecb23422fc ]

When the sender switches its congestion control during loss
recovery, if the recovery is spurious then it may incorrectly
revert cwnd and ssthresh to the older values set by a previous
congestion control. Consider a congestion control (like BBR)
that does not use ssthresh and keeps it infinite: the connection
may incorrectly revert cwnd to an infinite value when switching
from BBR to another congestion control.

This patch fixes it by disallowing such cwnd undo operation
upon switching congestion control.  Note that undo_marker
is not reset s.t. the packets that were incorrectly marked
lost would be corrected. We only avoid undoing the cwnd in
tcp_undo_cwnd_reduction().

Signed-off-by: Yuchung Cheng 
Signed-off-by: Soheil Hassas Yeganeh 
Signed-off-by: Neal Cardwell 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt()

2017-06-14T11:16:19+00:00

[ Upstream commit 6e80ac5cc992ab6256c3dae87f7e57db15e1a58c ]

xfrm6_find_1stfragopt() may now return an error code and we must
not treat it as a length.

Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options")
Signed-off-by: Ben Hutchings 
Acked-by: Craig Gallek 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

netem: fix skb_orphan_partial()

2017-06-07T10:05:59+00:00

commit f6ba8d33cfbb46df569972e64dbb5bb7e929bfd9 upstream.

I should have known that lowering skb->truesize was dangerous :/

In case packets are not leaving the host via a standard Ethernet device,
but looped back to local sockets, bad things can happen, as reported
by Michael Madsen ( https://bugzilla.kernel.org/show_bug.cgi?id=195713 )

So instead of tweaking skb->truesize, lets change skb->destructor
and keep a reference on the owner socket via its sk_refcnt.

Fixes: f2f872f9272a ("netem: Introduce skb_orphan_partial() helper")
Signed-off-by: Eric Dumazet 
Reported-by: Michael Madsen 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: add reference counting to metrics

2017-06-07T10:05:59+00:00

[ Upstream commit 3fb07daff8e99243366a081e5129560734de4ada ]

Andrey Konovalov reported crashes in ipv4_mtu()

I could reproduce the issue with KASAN kernels, between
10.246.7.151 and 10.246.7.152 :

1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 &

2) At the same time run following loop :
while :
do
 ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
 ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
done

Cong Wang attempted to add back rt->fi in commit
82486aa6f1b9 ("ipv4: restore rt->fi for reference counting")
but this proved to add some issues that were complex to solve.

Instead, I suggested to add a refcount to the metrics themselves,
being a standalone object (in particular, no reference to other objects)

I tried to make this patch as small as possible to ease its backport,
instead of being super clean. Note that we believe that only ipv4 dst
need to take care of the metric refcount. But if this is wrong,
this patch adds the basic infrastructure to extend this to other
families.

Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang
for his efforts on this problem.

Fixes: 2860583fe840 ("ipv4: Kill rt->fi")
Signed-off-by: Eric Dumazet 
Reported-by: Andrey Konovalov 
Reviewed-by: Julian Anastasov 
Acked-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sctp: fix ICMP processing if skb is non-linear

2017-06-07T10:05:59+00:00

[ Upstream commit 804ec7ebe8ea003999ca8d1bfc499edc6a9e07df ]

sometimes ICMP replies to INIT chunks are ignored by the client, even if
the encapsulated SCTP headers match an open socket. This happens when the
ICMP packet is carried by a paged skb: use skb_header_pointer() to read
packet contents beyond the SCTP header, so that chunk header and initiate
tag are validated correctly.

v2:
- don't use skb_header_pointer() to read the transport header, since
  icmp_socket_deliver() already puts these 8 bytes in the linear area.
- change commit message to make specific reference to INIT chunks.

Signed-off-by: Davide Caratti 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Vlad Yasevich 
Reviewed-by: Xin Long 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: avoid fastopen API to be used on AF_UNSPEC

2017-06-07T10:05:58+00:00

[ Upstream commit ba615f675281d76fd19aa03558777f81fb6b6084 ]

Fastopen API should be used to perform fastopen operations on the TCP
socket. It does not make sense to use fastopen API to perform disconnect
by calling it with AF_UNSPEC. The fastopen data path is also prone to
race conditions and bugs when using with AF_UNSPEC.

One issue reported and analyzed by Vegard Nossum is as follows:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Thread A:                            Thread B:
------------------------------------------------------------------------
sendto()
 - tcp_sendmsg()
     - sk_stream_memory_free() = 0
         - goto wait_for_sndbuf
	     - sk_stream_wait_memory()
	        - sk_wait_event() // sleep
          |                          sendto(flags=MSG_FASTOPEN, dest_addr=AF_UNSPEC)
	  |                           - tcp_sendmsg()
	  |                              - tcp_sendmsg_fastopen()
	  |                                 - __inet_stream_connect()
	  |                                    - tcp_disconnect() //because of AF_UNSPEC
	  |                                       - tcp_transmit_skb()// send RST
	  |                                    - return 0; // no reconnect!
	  |                           - sk_stream_wait_connect()
	  |                                 - sock_error()
	  |                                    - xchg(&sk->sk_err, 0)
	  |                                    - return -ECONNRESET
	- ... // wake up, see sk->sk_err == 0
    - skb_entail() on TCP_CLOSE socket

If the connection is reopened then we will send a brand new SYN packet
after thread A has already queued a buffer. At this point I think the
socket internal state (sequence numbers etc.) becomes messed up.

When the new connection is closed, the FIN-ACK is rejected because the
sequence number is outside the window. The other side tries to
retransmit,
but __tcp_retransmit_skb() calls tcp_trim_head() on an empty skb which
corrupts the skb data length and hits a BUG() in copy_and_csum_bits().
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Hence, this patch adds a check for AF_UNSPEC in the fastopen data path
and return EOPNOTSUPP to user if such case happens.

Fixes: cf60af03ca4e7 ("tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Reported-by: Vegard Nossum 
Signed-off-by: Wei Wang 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman