linux-stable.git/net, branch v3.18.82

ip6_gre: only increase err_count for some certain type icmpv6 in ip6gre_err

2017-11-18T10:06:31+00:00

[ Upstream commit f8d20b46ce55cf40afb30dcef6d9288f7ef46d9b ]

The similar fix in patch 'ipip: only increase err_count for some
certain type icmp in ipip_err' is needed for ip6gre_err.

In Jianlin's case, udp netperf broke even when receiving a TooBig
icmpv6 packet.

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Reported-by: Jianlin Shi 
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipip: only increase err_count for some certain type icmp in ipip_err

2017-11-18T10:06:31+00:00

[ Upstream commit f3594f0a7ea36661d7fd942facd7f31a64245f1a ]

t->err_count is used to count the link failure on tunnel and an err
will be reported to user socket in tx path if t->err_count is not 0.
udp socket could even return EHOSTUNREACH to users.

Since commit fd58156e456d ("IPIP: Use ip-tunneling code.") removed
the 'switch check' for icmp type in ipip_err(), err_count would be
increased by the icmp packet with ICMP_EXC_FRAGTIME code. an link
failure would be reported out due to this.

In Jianlin's case, when receiving ICMP_EXC_FRAGTIME a icmp packet,
udp netperf failed with the err:
  send_data: data send error: No route to host (errno 113)

We expect this error reported from tunnel to socket when receiving
some certain type icmp, but not ICMP_EXC_FRAGTIME, ICMP_SR_FAILED
or ICMP_PARAMETERPROB ones.

This patch is to bring 'switch check' for icmp type back to ipip_err
so that it only reports link failure for the right type icmp, just as
in ipgre_err() and ipip6_err().

Fixes: fd58156e456d ("IPIP: Use ip-tunneling code.")
Reported-by: Jianlin Shi 
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: flowlabel: do not leave opt->tot_len with garbage

2017-11-18T10:06:31+00:00

[ Upstream commit 864e2a1f8aac05effac6063ce316b480facb46ff ]

When syzkaller team brought us a C repro for the crash [1] that
had been reported many times in the past, I finally could find
the root cause.

If FlowLabel info is merged by fl6_merge_options(), we leave
part of the opt_space storage provided by udp/raw/l2tp with random value
in opt_space.tot_len, unless a control message was provided at sendmsg()
time.

Then ip6_setup_cork() would use this random value to perform a kzalloc()
call. Undefined behavior and crashes.

Fix is to properly set tot_len in fl6_merge_options()

At the same time, we can also avoid consuming memory and cpu cycles
to clear it, if every option is copied via a kmemdup(). This is the
change in ip6_setup_cork().

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801cb64a100 task.stack: ffff8801cc350000
RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168
RSP: 0018:ffff8801cc357550 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010
RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014
RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10
R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0
R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0
FS:  00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0
DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729
 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340
 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x358/0x5a0 net/socket.c:1750
 SyS_sendto+0x40/0x50 net/socket.c:1718
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4520a9
RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9
RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016
RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee
R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029
Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550

Signed-off-by: Eric Dumazet 
Reported-by: Dmitry Vyukov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sctp: reset owner sk for data chunks on out queues when migrating a sock

2017-11-18T10:06:31+00:00

[ Upstream commit d04adf1b355181e737b6b1e23d801b07f0b7c4c0 ]

Now when migrating sock to another one in sctp_sock_migrate(), it only
resets owner sk for the data in receive queues, not the chunks on out
queues.

It would cause that data chunks length on the sock is not consistent
with sk sk_wmem_alloc. When closing the sock or freeing these chunks,
the old sk would never be freed, and the new sock may crash due to
the overflow sk_wmem_alloc.

syzbot found this issue with this series:

  r0 = socket$inet_sctp()
  sendto$inet(r0)
  listen(r0)
  accept4(r0)
  close(r0)

Although listen() should have returned error when one TCP-style socket
is in connecting (I may fix this one in another patch), it could also
be reproduced by peeling off an assoc.

This issue is there since very beginning.

This patch is to reset owner sk for the chunks on out queues so that
sk sk_wmem_alloc has correct value after accept one sock or peeloff
an assoc to one sock.

Note that when resetting owner sk for chunks on outqueue, it has to
sctp_clear_owner_w/skb_orphan chunks before changing assoc->base.sk
first and then sctp_set_owner_w them after changing assoc->base.sk,
due to that sctp_wfree and it's callees are using assoc->base.sk.

Reported-by: Dmitry Vyukov 
Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/unix: don't show information about sockets from other namespaces

2017-11-18T10:06:30+00:00

[ Upstream commit 0f5da659d8f1810f44de14acf2c80cd6499623a0 ]

socket_diag shows information only about sockets from a namespace where
a diag socket lives.

But if we request information about one unix socket, the kernel don't
check that its netns is matched with a diag socket namespace, so any
user can get information about any unix socket in a system. This looks
like a bug.

v2: add a Fixes tag

Fixes: 51d7cccf0723 ("net: make sock diag per-namespace")
Signed-off-by: Andrei Vagin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sctp: add the missing sock_owned_by_user check in sctp_icmp_redirect

2017-11-18T10:06:30+00:00

[ Upstream commit 1cc276cec9ec574d41cf47dfc0f51406b6f26ab4 ]

Now sctp processes icmp redirect packet in sctp_icmp_redirect where
it calls sctp_transport_dst_check in which tp->dst can be released.

The problem is before calling sctp_transport_dst_check, it doesn't
check sock_owned_by_user, which means tp->dst could be freed while
a process is accessing it with owning the socket.

An use-after-free issue could be triggered by this.

This patch is to fix it by checking sock_owned_by_user before calling
sctp_transport_dst_check in sctp_icmp_redirect, so that it would not
release tp->dst if users still hold sock lock.

Besides, the same issue fixed in commit 45caeaa5ac0b ("dccp/tcp: fix
routing redirect race") on sctp also needs this check.

Fixes: 55be7a9c6074 ("ipv4: Add redirect support to all protocol icmp error handlers")
Reported-by: Eric Dumazet 
Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tun: call dev_get_valid_name() before register_netdevice()

2017-11-18T10:06:30+00:00

[ Upstream commit 0ad646c81b2182f7fa67ec0c8c825e0ee165696d ]

register_netdevice() could fail early when we have an invalid
dev name, in which case ->ndo_uninit() is not called. For tun
device, this is a problem because a timer etc. are already
initialized and it expects ->ndo_uninit() to clean them up.

We could move these initializations into a ->ndo_init() so
that register_netdevice() knows better, however this is still
complicated due to the logic in tun_detach().

Therefore, I choose to just call dev_get_valid_name() before
register_netdevice(), which is quicker and much easier to audit.
And for this specific case, it is already enough.

Fixes: 96442e42429e ("tuntap: choose the txq based on rxq")
Reported-by: Dmitry Alexeev 
Cc: Jason Wang 
Cc: "Michael S. Tsirkin" 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

l2tp: check ps->sock before running pppol2tp_session_ioctl()

2017-11-18T10:06:30+00:00

[ Upstream commit 5903f594935a3841137c86b9d5b75143a5b7121c ]

When pppol2tp_session_ioctl() is called by pppol2tp_tunnel_ioctl(),
the session may be unconnected. That is, it was created by
pppol2tp_session_create() and hasn't been connected with
pppol2tp_connect(). In this case, ps->sock is NULL, so we need to check
for this case in order to avoid dereferencing a NULL pointer.

Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: fix tcp_mtu_probe() vs highest_sack

2017-11-18T10:06:30+00:00

[ Upstream commit 2b7cda9c35d3b940eb9ce74b30bbd5eb30db493d ]

Based on SNMP values provided by Roman, Yuchung made the observation
that some crashes in tcp_sacktag_walk() might be caused by MTU probing.

Looking at tcp_mtu_probe(), I found that when a new skb was placed
in front of the write queue, we were not updating tcp highest sack.

If one skb is freed because all its content was copied to the new skb
(for MTU probing), then tp->highest_sack could point to a now freed skb.

Bad things would then happen, including infinite loops.

This patch renames tcp_highest_sack_combine() and uses it
from tcp_mtu_probe() to fix the bug.

Note that I also removed one test against tp->sacked_out,
since we want to replace tp->highest_sack regardless of whatever
condition, since keeping a stale pointer to freed skb is a recipe
for disaster.

Fixes: a47e5a988a57 ("[TCP]: Convert highest_sack to sk_buff to allow direct access")
Signed-off-by: Eric Dumazet 
Reported-by: Alexei Starovoitov 
Reported-by: Roman Gushchin 
Reported-by: Oleksandr Natalenko 
Acked-by: Alexei Starovoitov 
Acked-by: Neal Cardwell 
Acked-by: Yuchung Cheng 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mac80211: don't compare TKIP TX MIC key in reinstall prevention

2017-11-18T10:06:29+00:00

commit cfbb0d90a7abb289edc91833d0905931f8805f12 upstream.

For the reinstall prevention, the code I had added compares the
whole key. It turns out though that iwlwifi firmware doesn't
provide the TKIP TX MIC key as it's not needed in client mode,
and thus the comparison will always return false.

For client mode, thus always zero out the TX MIC key part before
doing the comparison in order to avoid accepting the reinstall
of the key with identical encryption and RX MIC key, but not the
same TX MIC key (since the supplicant provides the real one.)

Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything")
Signed-off-by: Johannes Berg 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman