linux-stable.git/net, branch v3.18.22

net: call rcu_read_lock early in process_backlog

2015-09-28T22:58:22+00:00

[ Upstream commit 2c17d27c36dcce2b6bf689f41a46b9e909877c21 ]

Incoming packet should be either in backlog queue or
in RCU read-side section. Otherwise, the final sequence of
flush_backlog() and synchronize_net() may miss packets
that can run without device reference:

CPU 1                  CPU 2
                       skb->dev: no reference
                       process_backlog:__skb_dequeue
                       process_backlog:local_irq_enable

on_each_cpu for
flush_backlog =>       IPI(hardirq): flush_backlog
                       - packet not found in backlog

                       CPU delayed ...
synchronize_net
- no ongoing RCU
read-side sections

netdev_run_todo,
rcu_barrier: no
ongoing callbacks
                       __netif_receive_skb_core:rcu_read_lock
                       - too late
free dev
                       process packet for freed dev

Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman 
Cc: Stephen Hemminger 
Signed-off-by: Julian Anastasov 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

rds: fix an integer overflow test in rds_info_getsockopt()

2015-09-28T22:57:02+00:00

[ Upstream commit 468b732b6f76b138c0926eadf38ac88467dcd271 ]

"len" is a signed integer.  We check that len is not negative, so it
goes from zero to INT_MAX.  PAGE_SIZE is unsigned long so the comparison
is type promoted to unsigned long.  ULONG_MAX - 4095 is a higher than
INT_MAX so the condition can never be true.

I don't know if this is harmful but it seems safe to limit "len" to
INT_MAX - 4095.

Fixes: a8c879a7ee98 ('RDS: Info and stats')
Signed-off-by: Dan Carpenter 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

netlink: don't hold mutex in rcu callback when releasing mmapd ring

2015-09-28T22:57:02+00:00

[ Upstream commit 0470eb99b4721586ccac954faac3fa4472da0845 ]

Kirill A. Shutemov says:

This simple test-case trigers few locking asserts in kernel:

int main(int argc, char **argv)
{
        unsigned int block_size = 16 * 4096;
        struct nl_mmap_req req = {
                .nm_block_size          = block_size,
                .nm_block_nr            = 64,
                .nm_frame_size          = 16384,
                .nm_frame_nr            = 64 * block_size / 16384,
        };
        unsigned int ring_size;
	int fd;

	fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC);
        if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0)
                exit(1);
        if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0)
                exit(1);

	ring_size = req.nm_block_nr * req.nm_block_size;
	mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	return 0;
}

+++ exited with 0 +++
BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616
in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init
3 locks held by init/1:
 #0:  (reboot_mutex){+.+...}, at: [] SyS_reboot+0xa9/0x220
 #1:  ((reboot_notifier_list).rwsem){.+.+..}, at: [] __blocking_notifier_call_chain+0x39/0x70
 #2:  (rcu_callback){......}, at: [] rcu_do_batch.isra.49+0x160/0x10c0
Preemption disabled at:[] __delay+0xf/0x20

CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014
 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102
 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002
 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98
Call Trace:
   [] dump_stack+0x4f/0x7b
 [] ___might_sleep+0x16d/0x270
 [] __might_sleep+0x4d/0x90
 [] mutex_lock_nested+0x2f/0x430
 [] ? _raw_spin_unlock_irqrestore+0x5d/0x80
 [] ? __this_cpu_preempt_check+0x13/0x20
 [] netlink_set_ring+0x1ed/0x350
 [] ? netlink_undo_bind+0x70/0x70
 [] netlink_sock_destruct+0x80/0x150
 [] __sk_free+0x1d/0x160
 [] sk_free+0x19/0x20
[..]

Cong Wang says:

We can't hold mutex lock in a rcu callback, [..]

Thomas Graf says:

The socket should be dead at this point. It might be simpler to
add a netlink_release_ring() function which doesn't require
locking at all.

Reported-by: "Kirill A. Shutemov" 
Diagnosed-by: Cong Wang 
Suggested-by: Thomas Graf 
Signed-off-by: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

inet: frags: fix defragmented packet's IP header for af_packet

2015-09-28T22:57:01+00:00

[ Upstream commit 0848f6428ba3a2e42db124d41ac6f548655735bf ]

When ip_frag_queue() computes positions, it assumes that the passed
sk_buff does not contain L2 headers.

However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly
functions can be called on outgoing packets that contain L2 headers.

Also, IPv4 checksum is not corrected after reassembly.

Fixes: 7736d33f4262 ("packet: Add pre-defragmentation support for ipv4 fanouts.")
Signed-off-by: Edward Hyunkoo Jee 
Signed-off-by: Eric Dumazet 
Cc: Willem de Bruijn 
Cc: Jerry Chu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ipv6: lock socket in ip6_datagram_connect()

2015-09-28T22:57:01+00:00

[ Upstream commit 03645a11a570d52e70631838cb786eb4253eb463 ]

ip6_datagram_connect() is doing a lot of socket changes without
socket being locked.

This looks wrong, at least for udp_lib_rehash() which could corrupt
lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses.

Signed-off-by: Eric Dumazet 
Acked-by: Herbert Xu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bridge: mdb: fix double add notification

2015-09-28T22:57:00+00:00

[ Upstream commit 5ebc784625ea68a9570d1f70557e7932988cd1b4 ]

Since the mdb add/del code was introduced there have been 2 br_mdb_notify
calls when doing br_mdb_add() resulting in 2 notifications on each add.

Example:
 Command: bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
 Before patch:
 root@debian:~# bridge monitor all
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent

 After patch:
 root@debian:~# bridge monitor all
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent

Signed-off-by: Nikolay Aleksandrov 
Fixes: cfd567543590 ("bridge: add support of adding and deleting mdb entries")
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: Fix skb csum races when peeking

2015-09-28T22:57:00+00:00

[ Upstream commit 89c22d8c3b278212eef6a8cc66b570bc840a6f5a ]

When we calculate the checksum on the recv path, we store the
result in the skb as an optimisation in case we need the checksum
again down the line.

This is in fact bogus for the MSG_PEEK case as this is done without
any locking.  So multiple threads can peek and then store the result
to the same skb, potentially resulting in bogus skb states.

This patch fixes this by only storing the result if the skb is not
shared.  This preserves the optimisations for the few cases where
it can be done safely due to locking or other reasons, e.g., SIOCINQ.

Signed-off-by: Herbert Xu 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: do not process device backlog during unregistration

2015-09-27T16:18:55+00:00

[ Upstream commit e9e4dd3267d0c5234c5c0f47440456b10875dec9 ]

commit 381c759d9916 ("ipv4: Avoid crashing in ip_error")
fixes a problem where processed packet comes from device
with destroyed inetdev (dev->ip_ptr). This is not expected
because inetdev_destroy is called in NETDEV_UNREGISTER
phase and packets should not be processed after
dev_close_many() and synchronize_net(). Above fix is still
required because inetdev_destroy can be called for other
reasons. But it shows the real problem: backlog can keep
packets for long time and they do not hold reference to
device. Such packets are then delivered to upper levels
at the same time when device is unregistered.
Calling flush_backlog after NETDEV_UNREGISTER_FINAL still
accounts all packets from backlog but before that some packets
continue to be delivered to upper levels long after the
synchronize_net call which is supposed to wait the last
ones. Also, as Eric pointed out, processed packets, mostly
from other devices, can continue to add new packets to backlog.

Fix the problem by moving flush_backlog early, after the
device driver is stopped and before the synchronize_net() call.
Then use netif_running check to make sure we do not add more
packets to backlog. We have to do it in enqueue_to_backlog
context when the local IRQ is disabled. As result, after the
flush_backlog and synchronize_net sequence all packets
should be accounted.

Thanks to Eric W. Biederman for the test script and his
valuable feedback!

Reported-by: Vittorio Gambaletta 
Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman 
Cc: Stephen Hemminger 
Signed-off-by: Julian Anastasov 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()

2015-09-27T16:18:55+00:00

[ Upstream commit fecdf8be2d91e04b0a9a4f79ff06499a36f5d14f ]

pktgen_thread_worker() is obviously racy, kthread_stop() can come
between the kthread_should_stop() check and set_current_state().

Signed-off-by: Oleg Nesterov 
Reported-by: Jan Stancek 
Reported-by: Marcelo Leitner 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bridge: mdb: zero out the local br_ip variable before use

2015-09-27T16:18:55+00:00

[ Upstream commit f1158b74e54f2e2462ba5e2f45a118246d9d5b43 ]

Since commit b0e9a30dd669 ("bridge: Add vlan id to multicast groups")
there's a check in br_ip_equal() for a matching vlan id, but the mdb
functions were not modified to use (or at least zero it) so when an
entry was added it would have a garbage vlan id (from the local br_ip
variable in __br_mdb_add/del) and this would prevent it from being
matched and also deleted. So zero out the whole local ip var to protect
ourselves from future changes and also to fix the current bug, since
there's no vlan id support in the mdb uapi - use always vlan id 0.
Example before patch:
root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
RTNETLINK answers: Invalid argument

After patch:
root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb

Signed-off-by: Nikolay Aleksandrov 
Fixes: b0e9a30dd669 ("bridge: Add vlan id to multicast groups")
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin