linux-stable.git/net, branch v3.14.65

mac80211: minstrel_ht: set default tx aggregation timeout to 0

2016-03-16T15:42:20+00:00

commit 7a36b930e6ed4702c866dc74a5ad07318a57c688 upstream.

The value 5000 was put here with the addition of the timeout field to
ieee80211_start_tx_ba_session. It was originally added in mac80211 to
save resources for drivers like iwlwifi, which only supports a limited
number of concurrent aggregation sessions.

Since iwlwifi does not use minstrel_ht and other drivers don't need
this, 0 is a better default - especially since there have been
recent reports of aggregation setup related issues reproduced with
ath9k. This should improve stability without causing any adverse
effects.

Acked-by: Avery Pennarun 
Signed-off-by: Felix Fietkau 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

mac80211: fix use of uninitialised values in RX aggregation

2016-03-16T15:42:20+00:00

commit f39ea2690bd61efec97622c48323f40ed6e16317 upstream.

Use kzalloc instead of kmalloc for struct tid_ampdu_rx to
initialize the "removed" field (all others are initialized
manually). That fixes:

UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29
load of value 2 is not a valid value for type '_Bool'
CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265
Workqueue: phy0 rt2x00usb_work_rxdone
 0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007
 ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500
 ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032
Call Trace:
 [] dump_stack+0x45/0x5f
 [] ubsan_epilogue+0xd/0x40
 [] __ubsan_handle_load_invalid_value+0x67/0x70
 [] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730
 [] ieee80211_prepare_and_rx_handle+0xd04/0x1c00
 [] __ieee80211_rx_handle_packet+0x1f3/0x750
 [] ieee80211_rx_napi+0x447/0x990

While at it, convert to use sizeof(*tid_agg_rx) instead.

Fixes: 788211d81bfdf ("mac80211: fix RX A-MPDU session reorder timer deletion")
Signed-off-by: Chris Bainbridge 
[reword commit message, use sizeof(*tid_agg_rx)]
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

wext: fix message delay/ordering

2016-03-16T15:42:20+00:00

commit 8bf862739a7786ae72409220914df960a0aa80d8 upstream.

Beniamino reported that he was getting an RTM_NEWLINK message for a
given interface, after the RTM_DELLINK for it. It turns out that the
message is a wireless extensions message, which was sent because the
interface had been connected and disconnection while it was deleted
caused a wext message.

For its netlink messages, wext uses RTM_NEWLINK, but the message is
without all the regular rtnetlink attributes, so "ip monitor link"
prints just rudimentary information:

5: wlan1:  mtu 1500 qdisc mq state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
Deleted 5: wlan1:  mtu 1500 qdisc noop state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
5: wlan1: 
    link/ether
(from my hwsim reproduction)

This can cause userspace to get confused since it doesn't expect an
RTM_NEWLINK message after RTM_DELLINK.

The reason for this is that wext schedules a worker to send out the
messages, and the scheduling delay can cause the messages to get out
to userspace in different order.

To fix this, have wext register a netdevice notifier and flush out
any pending messages when netdevice state changes. This fixes any
ordering whenever the original message wasn't sent by a notifier
itself.

Reported-by: Beniamino Galvani 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

sunrpc/cache: fix off-by-one in qword_get()

2016-03-03T23:06:53+00:00

commit b7052cd7bcf3c1478796e93e3dff2b44c9e82943 upstream.

The qword_get() function NUL-terminates its output buffer.  If the input
string is in hex format \xXXXX... and the same length as the output
buffer, there is an off-by-one:

  int qword_get(char **bpp, char *dest, int bufsize)
  {
      ...
      while (len < bufsize) {
          ...
          *dest++ = (h << 4) | l;
          len++;
      }
      ...
      *dest = '\0';
      return len;
  }

This patch ensures the NUL terminator doesn't fall outside the output
buffer.

Signed-off-by: Stefan Hajnoczi 
Signed-off-by: J. Bruce Fields 
Signed-off-by: Greg Kroah-Hartman

rfkill: fix rfkill_fop_read wait_event usage

2016-03-03T23:06:53+00:00

commit 6736fde9672ff6717ac576e9bba2fd5f3dfec822 upstream.

The code within wait_event_interruptible() is called with
!TASK_RUNNING, so mustn't call any functions that can sleep,
like mutex_lock().

Since we re-check the list_empty() in a loop after the wait,
it's safe to simply use list_empty() without locking.

This bug has existed forever, but was only discovered now
because all userspace implementations, including the default
'rfkill' tool, use poll() or select() to get a readable fd
before attempting to read.

Fixes: c64fb01627e24 ("rfkill: create useful userspace interface")
Reported-by: Dmitry Vyukov 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

libceph: don't bail early from try_read() when skipping a message

2016-03-03T23:06:53+00:00

commit e7a88e82fe380459b864e05b372638aeacb0f52d upstream.

The contract between try_read() and try_write() is that when called
each processes as much data as possible.  When instructed by osd_client
to skip a message, try_read() is violating this contract by returning
after receiving and discarding a single message instead of checking for
more.  try_write() then gets a chance to write out more requests,
generating more replies/skips for try_read() to handle, forcing the
messenger into a starvation loop.

Reported-by: Varada Kari 
Signed-off-by: Ilya Dryomov 
Tested-by: Varada Kari 
Reviewed-by: Alex Elder 
Signed-off-by: Greg Kroah-Hartman

rfkill: copy the name into the rfkill struct

2016-03-03T23:06:50+00:00

commit b7bb110008607a915298bf0f47d25886ecb94477 upstream.

Some users of rfkill, like NFC and cfg80211, use a dynamic name when
allocating rfkill, in those cases dev_name(). Therefore, the pointer
passed to rfkill_alloc() might not be valid forever, I specifically
found the case that the rfkill name was quite obviously an invalid
pointer (or at least garbage) when the wiphy had been renamed.

Fix this by making a copy of the rfkill name in rfkill_alloc().

Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

RDS: fix race condition when sending a message on unbound socket

2016-03-03T23:06:49+00:00

commit 8c7188b23474cca017b3ef354c4a58456f68303a upstream.

Sasha's found a NULL pointer dereference in the RDS connection code when
sending a message to an apparently unbound socket.  The problem is caused
by the code checking if the socket is bound in rds_sendmsg(), which checks
the rs_bound_addr field without taking a lock on the socket.  This opens a
race where rs_bound_addr is temporarily set but where the transport is not
in rds_bind(), leading to a NULL pointer dereference when trying to
dereference 'trans' in __rds_conn_create().

Vegard wrote a reproducer for this issue, so kindly ask him to share if
you're interested.

I cannot reproduce the NULL pointer dereference using Vegard's reproducer
with this patch, whereas I could without.

Complete earlier incomplete fix to CVE-2015-6937:

  74e98eb08588 ("RDS: verify the underlying transport exists before creating a connection")

Reviewed-by: Vegard Nossum 
Reviewed-by: Sasha Levin 
Acked-by: Santosh Shilimkar 
Signed-off-by: Quentin Casasnovas 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mac80211: mesh: fix call_rcu() usage

2016-03-03T23:06:49+00:00

commit c2e703a55245bfff3db53b1f7cbe59f1ee8a4339 upstream.

When using call_rcu(), the called function may be delayed quite
significantly, and without a matching rcu_barrier() there's no
way to be sure it has finished.
Therefore, global state that could be gone/freed/reused should
never be touched in the callback.

Fix this in mesh by moving the atomic_dec() into the caller;
that's not really a problem since we already unlinked the path
and it will be destroyed anyway.

This fixes a crash Jouni observed when running certain tests in
a certain order, in which the mesh interface was torn down, the
memory reused for a function pointer (work struct) and running
that then crashed since the pointer had been decremented by 1,
resulting in an invalid instruction byte stream.

Fixes: eb2b9311fd00 ("mac80211: mesh path table implementation")
Reported-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

unix: correctly track in-flight fds in sending process user_struct

2016-03-03T23:06:47+00:00

commit 415e3d3e90ce9e18727e8843ae343eda5a58fad6 upstream.

The commit referenced in the Fixes tag incorrectly accounted the number
of in-flight fds over a unix domain socket to the original opener
of the file-descriptor. This allows another process to arbitrary
deplete the original file-openers resource limit for the maximum of
open files. Instead the sending processes and its struct cred should
be credited.

To do so, we add a reference counted struct user_struct pointer to the
scm_fp_list and use it to account for the number of inflight unix fds.

Fixes: 712f4aad406bb1 ("unix: properly account for FDs passed over unix sockets")
Reported-by: David Herrmann 
Cc: David Herrmann 
Cc: Willy Tarreau 
Cc: Linus Torvalds 
Suggested-by: Linus Torvalds 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman