linux-stable.git/net/wireless, branch v6.9.6

wifi: cfg80211: validate HE operation element parsing

2024-06-21T12:40:31+00:00

commit 4dc3a3893dae5a7f73e5809273aca0f1f3548d55 upstream.

Validate that the HE operation element has the correct
length before parsing it.

Cc: stable@vger.kernel.org
Fixes: 645f3d85129d ("wifi: cfg80211: handle UHB AP and STA power type")
Reviewed-by: Miriam Rachel Korenblit 
Link: https://msgid.link/20240523120533.677025eb4a92.I44c091029ef113c294e8fe8b9bf871bf5dbeeb27@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

wifi: cfg80211: pmsr: use correct nla_get_uX functions

2024-06-21T12:40:01+00:00

[ Upstream commit ab904521f4de52fef4f179d2dfc1877645ef5f5c ]

The commit 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM
initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_
{NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in
following ways.

static const struct nla_policy
nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = {
    ...
    [NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] =
        NLA_POLICY_MAX(NLA_U8, 15),
    [NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 },
    [NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] =
        NLA_POLICY_MAX(NLA_U8, 15),
    [NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] =
        NLA_POLICY_MAX(NLA_U8, 31),
    ...
};

That is, those attributes are expected to be NLA_U8 and NLA_U16 types.
However, the consumers of these attributes in `pmsr_parse_ftm` blindly
all use `nla_get_u32`, which is incorrect and causes functionality issues
on little-endian platforms. Hence, fix them with the correct `nla_get_u8`
and `nla_get_u16` functions.

Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Lin Ma 
Link: https://msgid.link/20240521075059.47999-1-linma@zju.edu.cn
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: cfg80211: Lock wiphy in cfg80211_get_station

2024-06-21T12:40:01+00:00

[ Upstream commit 642f89daa34567d02f312d03e41523a894906dae ]

Wiphy should be locked before calling rdev_get_station() (see lockdep
assert in ieee80211_get_station()).

This fixes the following kernel NULL dereference:

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
 Mem abort info:
   ESR = 0x0000000096000006
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x06: level 2 translation fault
 Data abort info:
   ISV = 0, ISS = 0x00000006
   CM = 0, WnR = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000
 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000
 Internal error: Oops: 0000000096000006 [#1] SMP
 Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath
 CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705
 Hardware name: RPT (r1) (DT)
 Workqueue: bat_events batadv_v_elp_throughput_metric_update
 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core]
 lr : sta_set_sinfo+0xcc/0xbd4
 sp : ffff000007b43ad0
 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98
 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000
 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc
 x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000
 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d
 x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e
 x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000
 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000
 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90
 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000
 Call trace:
  ath10k_sta_statistics+0x10/0x2dc [ath10k_core]
  sta_set_sinfo+0xcc/0xbd4
  ieee80211_get_station+0x2c/0x44
  cfg80211_get_station+0x80/0x154
  batadv_v_elp_get_throughput+0x138/0x1fc
  batadv_v_elp_throughput_metric_update+0x1c/0xa4
  process_one_work+0x1ec/0x414
  worker_thread+0x70/0x46c
  kthread+0xdc/0xe0
  ret_from_fork+0x10/0x20
 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814)

This happens because STA has time to disconnect and reconnect before
batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In
this situation, ath10k_sta_state() can be in the middle of resetting
arsta data when the work queue get chance to be scheduled and ends up
accessing it. Locking wiphy prevents that.

Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API")
Signed-off-by: Remi Pommarel 
Reviewed-by: Nicolas Escande 
Acked-by: Antonio Quartulli 
Link: https://msgid.link/983b24a6a176e0800c01aedcd74480d9b551cb13.1716046653.git.repk@triplefau.lt
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: cfg80211: fully move wiphy work to unbound workqueue

2024-06-21T12:40:01+00:00

[ Upstream commit e296c95eac655008d5a709b8cf54d0018da1c916 ]

Previously I had moved the wiphy work to the unbound
system workqueue, but missed that when it restarts and
during resume it was still using the normal system
workqueue. Fix that.

Fixes: 91d20ab9d9ca ("wifi: cfg80211: use system_unbound_wq for wiphy work")
Reviewed-by: Miriam Rachel Korenblit 
Link: https://msgid.link/20240522124126.7ca959f2cbd3.I3e2a71ef445d167b84000ccf934ea245aef8d395@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: nl80211: Avoid address calculations via out of bounds array indexing

2024-05-30T07:44:30+00:00

[ Upstream commit 838c7b8f1f278404d9d684c34a8cb26dc41aaaa1 ]

Before request->channels[] can be used, request->n_channels must be set.
Additionally, address calculations for memory after the "channels" array
need to be calculated from the allocation base ("request") rather than
via the first "out of bounds" index of "channels", otherwise run-time
bounds checking will throw a warning.

Reported-by: Nathan Chancellor 
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook 
Tested-by: Nathan Chancellor 
Link: https://msgid.link/20240424220057.work.819-kees@kernel.org
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: cfg80211: ignore non-TX BSSs in per-STA profile

2024-05-30T07:44:12+00:00

[ Upstream commit 97f8df4db4c8ef50b659d8b228c1f42fe111e7c8 ]

If a non-TX BSS is included in a per-STA profile, then we cannot set
transmitted_bss for it. Even worse, if we do things properly we should
be configuring both bssid_index and max_bssid_indicator correctly. We do
not actually have both pieces of information (and, some APs currently
do not include either).

So, ignore any per-STA profile where the RNR says that the BSS is not
transmitted. Also fix transmitted_bss to never be set for per-STA
profiles.

This fixes issues where mac80211 was setting the reference BSSID to an
incorrect value.

Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Benjamin Berg 
Reviewed-by: Johannes Berg 
Signed-off-by: Miri Korenblit 
Link: https://msgid.link/20240318184907.6a0babed655a.Iad447fea417c63f683da793556b97c31d07a4aab@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: nl80211: don't free NULL coalescing rule

2024-04-19T08:02:17+00:00

If the parsing fails, we can dereference a NULL pointer here.

Cc: stable@vger.kernel.org
Fixes: be29b99a9b51 ("cfg80211/nl80211: Add packet coalesce support")
Reviewed-by: Miriam Rachel Korenblit 
Link: https://msgid.link/20240418105220.b328f80406e7.Id75d961050deb05b3e4e354e024866f350c68103@changeid
Signed-off-by: Johannes Berg

wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt class

2024-04-08T18:14:08+00:00

The declarations of the tx_rx_evt class and the rdev_set_antenna event
use the wrong order of arguments in the TP_ARGS macro.

Fix the order of arguments in the TP_ARGS macro.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Igor Artemiev 
Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru
Signed-off-by: Johannes Berg

wifi: cfg80211: fix rdev_dump_mpp() arguments order

2024-03-25T14:23:06+00:00

Fix the order of arguments in the TP_ARGS macro
for the rdev_dump_mpp tracepoint event.

Found by Linux Verification Center (linuxtesting.org).

Signed-off-by: Igor Artemiev 
Link: https://msgid.link/20240311164519.118398-1-Igor.A.Artemiev@mcst.ru
Signed-off-by: Johannes Berg

wifi: cfg80211: add a flag to disable wireless extensions

2024-03-25T14:23:06+00:00

Wireless extensions are already disabled if MLO is enabled,
given that we cannot support MLO there with all the hard-
coded assumptions about BSSID etc.

However, the WiFi7 ecosystem is still stabilizing, and some
devices may need MLO disabled while that happens. In that
case, we might end up with a device that supports wext (but
not MLO) in one kernel, and then breaks wext in the future
(by enabling MLO), which is not desirable.

Add a flag to let such drivers/devices disable wext even if
MLO isn't yet enabled.

Cc: stable@vger.kernel.org
Link: https://msgid.link/20240314110951.b50f1dc4ec21.I656ddd8178eedb49dc5c6c0e70f8ce5807afb54f@changeid
Signed-off-by: Johannes Berg