linux-stable.git/net/wireless, branch v5.4.129

cfg80211: call cfg80211_leave_ocb when switching away from OCB

2021-06-30T12:47:45+00:00

[ Upstream commit a64b6a25dd9f984ed05fade603a00e2eae787d2f ]

If the userland switches back-and-forth between NL80211_IFTYPE_OCB and
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), there is a
chance where the cleanup cfg80211_leave_ocb() is not called. This leads
to initialization of in-use memory (e.g. init u.ibss while in-use by
u.ocb) due to a shared struct/union within ieee80211_sub_if_data:

struct ieee80211_sub_if_data {
    ...
    union {
        struct ieee80211_if_ap ap;
        struct ieee80211_if_vlan vlan;
        struct ieee80211_if_managed mgd;
        struct ieee80211_if_ibss ibss; // <- shares address
        struct ieee80211_if_mesh mesh;
        struct ieee80211_if_ocb ocb; // <- shares address
        struct ieee80211_if_mntr mntr;
        struct ieee80211_if_nan nan;
    } u;
    ...
}

Therefore add handling of otype == NL80211_IFTYPE_OCB, during
cfg80211_change_iface() to perform cleanup when leaving OCB mode.

link to syzkaller bug:
https://syzkaller.appspot.com/bug?id=0612dbfa595bf4b9b680ff7b4948257b8e3732d5

Reported-by: syzbot+105896fac213f26056f9@syzkaller.appspotmail.com
Signed-off-by: Du Cheng 
Link: https://lore.kernel.org/r/20210428063941.105161-1-ducheng2@gmail.com
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

cfg80211: avoid double free of PMSR request

2021-06-23T12:41:30+00:00

commit 0288e5e16a2e18f0b7e61a2b70d9037fc6e4abeb upstream.

If cfg80211_pmsr_process_abort() moves all the PMSR requests that
need to be freed into a local list before aborting and freeing them.
As a result, it is possible that cfg80211_pmsr_complete() will run in
parallel and free the same PMSR request.

Fix it by freeing the request in cfg80211_pmsr_complete() only if it
is still in the original pmsr list.

Cc: stable@vger.kernel.org
Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Avraham Stern 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1fbef57e269a.I00294bebdb0680b892f8d1d5c871fd9dbe785a5e@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: make certificate generation more robust

2021-06-23T12:41:29+00:00

commit b5642479b0f7168fe16d156913533fe65ab4f8d5 upstream.

If all net/wireless/certs/*.hex files are deleted, the build
will hang at this point since the 'cat' command will have no
arguments. Do "echo | cat - ..." so that even if the "..."
part is empty, the whole thing won't hang.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c989056c3664.Ic3b77531d00b30b26dcd69c64e55ae2f60c3f31e@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

nl80211: validate key indexes for cfg80211_registered_device

2021-06-10T11:37:02+00:00

commit 2d9463083ce92636a1bdd3e30d1236e3e95d859e upstream

syzbot discovered a bug in which an OOB access was being made because
an unsuitable key_idx value was wrongly considered to be acceptable
while deleting a key in nl80211_del_key().

Since we don't know the cipher at the time of deletion, if
cfg80211_validate_key_settings() were to be called directly in
nl80211_del_key(), even valid keys would be wrongly determined invalid,
and deletion wouldn't occur correctly.
For this reason, a new function - cfg80211_valid_key_idx(), has been
created, to determine if the key_idx value provided is valid or not.
cfg80211_valid_key_idx() is directly called in 2 places -
nl80211_del_key(), and cfg80211_validate_key_settings().

Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Suggested-by: Johannes Berg 
Signed-off-by: Anant Thazhemadam 
Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com
Cc: stable@vger.kernel.org
[also disallow IGTK key IDs if no IGTK cipher is supported]
Signed-off-by: Johannes Berg 
Signed-off-by: Zubin Mithra 
Signed-off-by: Sasha Levin

cfg80211: mitigate A-MSDU aggregation attacks

2021-06-03T06:59:01+00:00

commit 2b8a1fee3488c602aca8bea004a087e60806a5cf upstream.

Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the
destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP)
header, and if so dropping the complete A-MSDU frame. This mitigates
known attacks, although new (unknown) aggregation-based attacks may
remain possible.

This defense works because in A-MSDU aggregation injection attacks, a
normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means
the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042
header. In other words, the destination MAC address of the first A-MSDU
subframe contains the start of an RFC1042 header during an aggregation
attack. We can detect this and thereby prevent this specific attack.
For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi
Through Frame Aggregation and Fragmentation".

Note that for kernel 4.9 and above this patch depends on "mac80211:
properly handle A-MSDUs that start with a rfc1042 header". Otherwise
this patch has no impact and attacks will remain possible.

Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef 
Link: https://lore.kernel.org/r/20210511200110.25d93176ddaf.I9e265b597f2cd23eb44573f35b625947b386a9de@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

mac80211: properly handle A-MSDUs that start with an RFC 1042 header

2021-06-03T06:59:01+00:00

commit a1d5ff5651ea592c67054233b14b30bf4452999c upstream.

Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042
header. This can occur in practice when the destination MAC address
equals AA:AA:03:00:00:00. More importantly, this simplifies the next
patch to mitigate A-MSDU injection attacks.

Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef 
Link: https://lore.kernel.org/r/20210511200110.0b2b886492f0.I23dd5d685fe16d3b0ec8106e8f01b59f499dffed@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: scan: drop entry from hidden_list on overflow

2021-05-14T07:44:13+00:00

commit 010bfbe768f7ecc876ffba92db30432de4997e2a upstream.

If we overflow the maximum number of BSS entries and free the
new entry, drop it from any hidden_list that it may have been
added to in the code above or in cfg80211_combine_bsses().

Reported-by: Dan Carpenter 
Link: https://lore.kernel.org/r/20210416094212.5de7d1676ad7.Ied283b0bc5f504845e7d6ab90626bdfa68bb3dc0@changeid
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: remove WARN_ON() in cfg80211_sme_connect

2021-04-14T06:24:18+00:00

commit 1b5ab825d9acc0f27d2f25c6252f3526832a9626 upstream.

A WARN_ON(wdev->conn) would trigger in cfg80211_sme_connect(), if multiple
send_msg(NL80211_CMD_CONNECT) system calls are made from the userland, which
should be anticipated and handled by the wireless driver. Remove this WARN_ON()
to prevent kernel panic if kernel is configured to "panic_on_warn".

Bug reported by syzbot.

Reported-by: syzbot+5f9392825de654244975@syzkaller.appspotmail.com
Signed-off-by: Du Cheng 
Link: https://lore.kernel.org/r/20210407162756.6101-1-ducheng2@gmail.com
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

wext: fix NULL-ptr-dereference with cfg80211's lack of commit()

2021-02-03T22:25:56+00:00

commit 5122565188bae59d507d90a9a9fd2fd6107f4439 upstream.

Since cfg80211 doesn't implement commit, we never really cared about
that code there (and it's configured out w/o CONFIG_WIRELESS_EXT).
After all, since it has no commit, it shouldn't return -EIWCOMMIT to
indicate commit is needed.

However, EIWCOMMIT is actually an alias for EINPROGRESS, which _can_
happen if e.g. we try to change the frequency but we're already in
the process of connecting to some network, and drivers could return
that value (or even cfg80211 itself might).

This then causes us to crash because dev->wireless_handlers is NULL
but we try to check dev->wireless_handlers->standard[0].

Fix this by also checking dev->wireless_handlers. Also simplify the
code a little bit.

Cc: stable@vger.kernel.org
Reported-by: syzbot+444248c79e117bc99f46@syzkaller.appspotmail.com
Reported-by: syzbot+8b2a88a09653d4084179@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210121171621.2076e4a37d5a.I5d9c72220fe7bb133fb718751da0180a57ecba4e@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: initialize rekey_data

2020-12-30T10:51:29+00:00

[ Upstream commit f495acd8851d7b345e5f0e521b2645b1e1f928a0 ]

In case we have old supplicant, the akm field is uninitialized.

Signed-off-by: Sara Sharon 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.930f0ab7ebee.Ic546e384efab3f4a89f318eafddc3eb7d556aecb@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin