linux-stable.git/net/wireless, branch linux-3.18.y

cfg80211: size various nl80211 messages correctly

2019-04-03T04:22:11+00:00

[ Upstream commit 4ef8c1c93f848e360754f10eb2e7134c872b6597 ]

Ilan reported that sometimes nl80211 messages weren't working if
the frames being transported got very large, which was really a
problem for userspace-to-kernel messages, but prompted me to look
at the code.

Upon review, I found various places where variable-length data is
transported in an nl80211 message but the message isn't allocated
taking that into account. This shouldn't cause any problems since
the frames aren't really that long, apart in one place where two
(possibly very long frames) might not fit.

Fix all the places (that I found) that get variable length data
from the driver and put it into a message to take the length of
the variable data into account. The 100 there is just a safe
constant for the remaining message overhead (it's usually around
50 for most messages.)

Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

cfg80211: extend range deviation for DMG

2019-03-23T07:18:54+00:00

[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ]

Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.

Signed-off-by: Chaitanya Tata 
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

cfg80211: reg: Init wiphy_idx in regulatory_hint_core()

2018-11-10T15:39:12+00:00

[ Upstream commit 24f33e64fcd0d50a4b1a8e5b41bd0257aa66b0e8 ]

Core regulatory hints didn't set wiphy_idx to WIPHY_IDX_INVALID. Since
the regulatory request is zeroed, wiphy_idx was always implicitly set to
0. This resulted in updating only phy #0.
Fix that.

Fixes: 806a9e39670b ("cfg80211: make regulatory_request use wiphy_idx instead of wiphy")
Signed-off-by: Andrei Otcheretianski 
Signed-off-by: Luca Coelho 
[add fixes tag]
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

cfg80211: nl80211_update_ft_ies() to validate NL80211_ATTR_IE

2018-10-13T07:09:29+00:00

[ Upstream commit 4f0223bfe9c3e62d8f45a85f1ef1b18a8a263ef9 ]

nl80211_update_ft_ies() tried to validate NL80211_ATTR_IE with
is_valid_ie_attr() before dereferencing it, but that helper function
returns true in case of NULL pointer (i.e., attribute not included).
This can result to dereferencing a NULL pointer. Fix that by explicitly
checking that NL80211_ATTR_IE is included.

Fixes: 355199e02b83 ("cfg80211: Extend support for IEEE 802.11r Fast BSS Transition")
Signed-off-by: Arunk Khandavalli 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

nl80211: Add a missing break in parse_station_flags

2018-09-05T07:16:20+00:00

[ Upstream commit 5cf3006cc81d9aa09a10aa781fc065546b12919d ]

I was looking at usually suppressed gcc warnings,
[-Wimplicit-fallthrough=] in this case:

The code definitely looks like a break is missing here.
However I am not able to test the NL80211_IFTYPE_MESH_POINT,
nor do I actually know what might be :)
So please use this patch with caution and only if you are
able to do some testing.

Signed-off-by: Bernd Edlinger 
[johannes: looks obvious enough to apply as is, interesting
 though that it never seems to have been a problem]
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

cfg80211: limit wiphy names to 128 bytes

2018-05-25T08:54:57+00:00

commit a7cfebcb7594a24609268f91299ab85ba064bf82 upstream.

There's currently no limit on wiphy names, other than netlink
message size and memory limitations, but that causes issues when,
for example, the wiphy name is used in a uevent, e.g. in rfkill
where we use the same name for the rfkill instance, and then the
buffer there is "only" 2k for the environment variables.

This was reported by syzkaller, which used a 4k name.

Limit the name to something reasonable, I randomly picked 128.

Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

nl80211: check for the required netlink attributes presence

2017-10-05T07:35:52+00:00

commit e785fa0a164aa11001cba931367c7f94ffaff888 upstream.

nl80211_set_rekey_data() does not check if the required attributes
NL80211_REKEY_DATA_{REPLAY_CTR,KEK,KCK} are present when processing
NL80211_CMD_SET_REKEY_OFFLOAD request. This request can be issued by
users with CAP_NET_ADMIN privilege and may result in NULL dereference
and a system crash. Add a check for the required attributes presence.
This patch is based on the patch by bo Zhang.

This fixes CVE-2017-12153.

References: https://bugzilla.redhat.com/show_bug.cgi?id=1491046
Fixes: e5497d766ad ("cfg80211/nl80211: support GTK rekey offload")
Reported-by: bo Zhang 
Signed-off-by: Vladis Dronov 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: Check if PMKID attribute is of expected size

2017-07-21T06:12:22+00:00

commit 9361df14d1cbf966409d5d6f48bb334384fbe138 upstream.

nla policy checks for only maximum length of the attribute data
when the attribute type is NLA_BINARY. If userspace sends less
data than specified, the wireless drivers may access illegal
memory. When type is NLA_UNSPEC, nla policy check ensures that
userspace sends minimum specified length number of bytes.

Remove type assignment to NLA_BINARY from nla_policy of
NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum
WLAN_PMKID_LEN bytes are received from userspace with
NL80211_ATTR_PMKID.

Fixes: 67fbb16be69d ("nl80211: PMKSA caching support")
Signed-off-by: Srinivas Dasari 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES

2017-07-21T06:12:21+00:00

commit d7f13f7450369281a5d0ea463cc69890a15923ae upstream.

validate_scan_freqs() retrieves frequencies from attributes
nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with
nla_get_u32(), which reads 4 bytes from each attribute
without validating the size of data received. Attributes
nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy.

Validate size of each attribute before parsing to avoid potential buffer
overread.

Fixes: 2a519311926 ("cfg80211/nl80211: scanning (and mac80211 update to use it)")
Signed-off-by: Srinivas Dasari 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE

2017-07-21T06:12:21+00:00

commit 8feb69c7bd89513be80eb19198d48f154b254021 upstream.

Buffer overread may happen as nl80211_set_station() reads 4 bytes
from the attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE without
validating the size of data received when userspace sends less
than 4 bytes of data with NL80211_ATTR_LOCAL_MESH_POWER_MODE.
Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE to avoid
the buffer overread.

Fixes: 3b1c5a5307f ("{cfg,nl}80211: mesh power mode primitives and userspace access")
Signed-off-by: Srinivas Dasari 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman