linux-stable.git/net/wireless/reg.c, branch linux-5.14.y

cfg80211: set custom regdomain after wiphy registration

2021-06-23T11:05:09+00:00

We used to set regulatory info before the registration of
the device and then the regulatory info didn't get set, because
the device isn't registered so there isn't a device to set the
regulatory info for. So set the regulatory info after the device
registration.
Call reg_process_self_managed_hints() once again after the device
registration because it does nothing before it.

Signed-off-by: Miri Korenblit 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c96eadcffe80.I86799c2c866b5610b4cf91115c21d8ceb525c5aa@changeid
Signed-off-by: Johannes Berg

cfg80211: reg: improve bad regulatory warning

2021-06-23T10:42:49+00:00

There's a WARN_ON here but it says nothing, and the later
dump of the regdomain aren't usually printed. As a first
step, include the regdomain code in the WARN_ON message,
just like in other similar instances.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.853ffdd6c62b.I63e37b2ab184ee3653686e4df4dd23eb303687d2@changeid
Signed-off-by: Johannes Berg

cfg80211: regulatory: use DEFINE_SPINLOCK() for spinlock

2021-04-08T08:17:32+00:00

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().

Reported-by: Hulk Robot 
Signed-off-by: Qiheng Lin 
Link: https://lore.kernel.org/r/20210325143854.13186-1-linqiheng@huawei.com
Signed-off-by: Johannes Berg

reg.c: Fix a spello

2021-03-29T00:31:14+00:00

s/ingoring/ignoring/

Signed-off-by: Bhaskar Chowdhury 
Signed-off-by: David S. Miller

cfg80211: initialize reg_rule in __freq_reg_info()

2021-02-12T07:56:19+00:00

Sparse started warning on this function because we can potentially
return an uninitialized value.  The reason is that if the caller
passes a min_bw value that is higher then the last value in bws[], we
will not go into the loop and reg_rule will remain initialized.  This
cannot happen because the only caller of this function uses either 1
or 20 in min_bw, but the function will be more robust if we
pre-initialize the value.

Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210204154439.6c884ea7281c.I257278d03b0c1ae0aa6631672cfa48f1a95d5996@changeid
Signed-off-by: Johannes Berg

cfg80211: avoid holding the RTNL when calling the driver

2021-01-26T10:55:50+00:00

Currently, _everything_ in cfg80211 holds the RTNL, and if you
have a slow USB device (or a few) you can get some bad lock
contention on that.

Fix that by re-adding a mutex to each wiphy/rdev as we had at
some point, so we have locking for the wireless_dev lists and
all the other things in there, and also so that drivers still
don't have to worry too much about it (they still won't get
parallel calls for a single device).

Then, we can restrict the RTNL to a few cases where we add or
remove interfaces and really need the added protection. Some
of the global list management still also uses the RTNL, since
we need to have it anyway for netdev management, but we only
hold the RTNL for very short periods of time here.

Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid
Tested-by: Marek Szyprowski  [marvell driver issues]
Signed-off-by: Johannes Berg

cfg80211: Save the regulatory domain with a lock

2021-01-08T20:03:27+00:00

Saving the regulatory domain while setting custom regulatory domain
was done while accessing a RCU protected pointer but without any
protection.

Fix this by using RTNL while accessing the pointer.

Signed-off-by: Ilan Peer 
Reported-by: syzbot+27771d4abcd9b7a1f5d3@syzkaller.appspotmail.com
Reported-by: syzbot+db4035751c56c0079282@syzkaller.appspotmail.com
Reported-by: Hans de Goede 
Fixes: beee24695157 ("cfg80211: Save the regulatory domain when setting custom regulatory")
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210105165657.613e9a876829.Ia38d27dbebea28bf9c56d70691d243186ede70e7@changeid
Signed-off-by: Johannes Berg

cfg80211: Save the regulatory domain when setting custom regulatory

2020-12-11T11:57:24+00:00

When custom regulatory was set, only the channels setting was updated, but
the regulatory domain was not saved. Fix it by saving it.

Signed-off-by: Ilan Peer 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.290fa5c5568a.Ic5732aa64de6ee97ae3578bd5779fc723ba489d1@changeid
Signed-off-by: Johannes Berg

net: wireless: make a const array static, makes object smaller

2020-12-11T11:50:02+00:00

Don't populate the const array bws on the stack but instead it
static. Makes the object code smaller by 80 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  85694	  16865	   1216	 103775	  1955f	./net/wireless/reg.o

After:
   text	   data	    bss	    dec	    hex	filename
  85518	  16961	   1216	 103695	  1950f	./net/wireless/reg.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King 
Link: https://lore.kernel.org/r/20201116181636.362729-1-colin.king@canonical.com
Signed-off-by: Johannes Berg

cfg80211: regulatory: Fix inconsistent format argument

2020-10-30T09:06:56+00:00

Fix follow warning:
[net/wireless/reg.c:3619]: (warning) %d in format string (no. 2)
requires 'int' but the argument type is 'unsigned int'.

Reported-by: Hulk Robot 
Signed-off-by: Ye Bin 
Link: https://lore.kernel.org/r/20201009070215.63695-1-yebin10@huawei.com
Signed-off-by: Johannes Berg