linux-stable.git/net/wireless/core.h, branch v4.9

cfg80211: limit scan results cache size

2016-11-18T07:44:44+00:00

It's possible to make scanning consume almost arbitrary amounts
of memory, e.g. by sending beacon frames with random BSSIDs at
high rates while somebody is scanning.

Limit the number of BSS table entries we're willing to cache to
1000, limiting maximum memory usage to maybe 4-5MB, but lower
in practice - that would be the case for having both full-sized
beacon and probe response frames for each entry; this seems not
possible in practice, so a limit of 1000 entries will likely be
closer to 0.5 MB.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg

cfg80211: add start / stop NAN commands

2016-09-30T11:21:14+00:00

This allows user space to start/stop NAN interface.
A NAN interface is like P2P device in a few aspects: it
doesn't have a netdev associated to it.
Add the new interface type and prevent operations that
can't be executed on NAN interface like scan.

Define several attributes that may be configured by user space
when starting NAN functionality (master preference and dual
band operation)

Signed-off-by: Andrei Otcheretianski 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Johannes Berg

cfg80211: Add support for static WEP in the driver

2016-09-30T11:19:10+00:00

Add support for drivers that implement static WEP internally, i.e.
expose connection keys to the driver in connect flow and don't
upload the keys after the connection.

Signed-off-by: David Spinadel 
Signed-off-by: Johannes Berg

cfg80211: reduce connect key caching struct size

2016-09-13T18:20:54+00:00

After the previous patches, connect keys can only (correctly)
be used for storing static WEP keys. Therefore, remove all the
data for dealing with key index 4/5 and reduce the size of the
key material to the maximum for WEP keys.

Signed-off-by: Johannes Berg

nl80211: support beacon report scanning

2016-07-06T12:51:31+00:00

Beacon report radio measurement requires reporting observed BSSs
on the channels specified in the beacon request. If the measurement
mode is set to passive or active, it requires actually performing a
scan (passive or active, accordingly), and reporting the time that
the scan was started and the time each beacon/probe was received
(both in terms of TSF of the BSS of the requesting AP). If the
request mode is table, this information is optional.
In addition, the radio measurement request specifies the channel
dwell time for the measurement.

In order to use scan for beacon report when the mode is active or
passive, add a parameter to scan request that specifies the
channel dwell time, and add scan start time and beacon received time
to scan results information.

Supporting beacon report is required for Multi Band Operation (MBO).

Signed-off-by: Assaf Krauss 
Signed-off-by: David Spinadel 
Signed-off-by: Avraham Stern 
Signed-off-by: Luca Coelho 
Signed-off-by: Johannes Berg

cfg80211: Allow cfg80211_connect_result() errors to be distinguished

2016-05-31T13:22:15+00:00

Previously, the status parameter to cfg80211_connect_result() was
documented as using WLAN_STATUS_UNSPECIFIED_FAILURE (1) when the real
status code for the failure is not known. This value can be used by an
AP (and often is) and as such, user space cannot distinguish between
explicitly rejected authentication/association and not being able to
even try to associate or not receiving a response from the AP.

Add a new inline function, cfg80211_connect_timeout(), to be used when
the driver knows that the connection attempt failed due to a reason
where connection could not be attempt or no response was received from
the AP. The internal functions now allow a negative status value (-1) to
be used as an indication of this special case. This results in the
NL80211_ATTR_TIMED_OUT to be added to the NL80211_CMD_CONNECT event to
allow user space to determine this case was hit. For backwards
compatibility, NL80211_STATUS_CODE with the value
WLAN_STATUS_UNSPECIFIED_FAILURE is still indicated in the event in such
a case.

Signed-off-by: Jouni Malinen 
[johannes: fix cfg80211_connect_bss() prototype to use int for status,
 add cfg80211_connect_timeout() to docbook, fix docbook]
Signed-off-by: Johannes Berg

cfg80211: make wdev_list accessible to drivers

2016-05-12T09:16:40+00:00

There's no harm in having drivers read the list, since they can
use RCU protection or RTNL locking; allow this to not require
each and every driver to also implement its own bookkeeping.

Signed-off-by: Johannes Berg

cfg80211: remove erroneous comment

2016-05-12T09:16:24+00:00

The devlist_mtx mutex was removed about two years ago, in favour of just
using RTNL/RCU protection. Remove the comment still referencing it.

Signed-off-by: Johannes Berg

cfg80211: Add option to report the bss entry in connect result

2016-04-26T07:40:12+00:00

Since cfg80211 maintains separate BSS table entries for APs if the same
BSSID, SSID pair is seen on multiple channels, it is possible that it
can map the current_bss to a BSS entry on the wrong channel. This
current_bss will not get flushed unless disconnected and cfg80211
reports a wrong channel as the associated channel.

Fix this by introducing a new cfg80211_connect_bss() function which is
similar to cfg80211_connect_result(), but it includes an additional
parameter: the bss the STA is connected to. This allows drivers to
provide the exact bss entry that matches the BSS to which the connection
was completed.

Reviewed-by: Jouni Malinen 
Signed-off-by: Vidyullatha Kanchanapally 
Signed-off-by: Sunil Dutt 
Signed-off-by: Johannes Berg

cfg80211: Remove unused cfg80211_can_use_iftype_chan()

2015-12-04T13:43:32+00:00

Last caller of this function was removed in 3.17 in commit
97dc94f1d933c9df2c0b327066ea130c0e92083f.

Signed-off-by: Michal Sojka 
Signed-off-by: Johannes Berg