linux-stable.git/net/tls, branch v6.7.2

net: tls, fix WARNIING in __sk_msg_free

2024-01-25T23:45:28+00:00

[ Upstream commit dc9dfc8dc629e42f2234e3327b75324ffc752bc9 ]

A splice with MSG_SPLICE_PAGES will cause tls code to use the
tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user
provided pages from the msg into the msg_pl. This will loop over the
msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user
can also set the MORE flag to hint stack to delay sending until receiving
more pages and ideally a full buffer.

If the user adds more pages to the msg than can fit in the msg_pl
scatterlist (MAX_MSG_FRAGS) we should ignore the MORE flag and send
the buffer anyways.

What actually happens though is we abort the msg to msg_pl scatterlist
setup and then because we forget to set 'full record' indicating we
can no longer consume data without a send we fallthrough to the 'continue'
path which will check if msg_data_left(msg) has more bytes to send and
then attempts to fit them in the already full msg_pl. Then next
iteration of sender doing send will encounter a full msg_pl and throw
the warning in the syzbot report.

To fix simply check if we have a full_record in splice code path and
if not send the msg regardless of MORE flag.

Reported-and-tested-by: syzbot+f2977222e0e95cec15c8@syzkaller.appspotmail.com
Reported-by: Edward Adam Davis 
Fixes: fe1e81d4f73b ("tls/sw: Support MSG_SPLICE_PAGES")
Reviewed-by: Jakub Kicinski 
Signed-off-by: John Fastabend 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: tls, update curr on splice as well

2023-12-07T17:52:28+00:00

The curr pointer must also be updated on the splice similar to how
we do this for other copy types.

Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend 
Reported-by: Jann Horn 
Link: https://lore.kernel.org/r/20231206232706.374377-2-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski

tls: fix NULL deref on tls_sw_splice_eof() with empty record

2023-11-23T16:51:45+00:00

syzkaller discovered that if tls_sw_splice_eof() is executed as part of
sendfile() when the plaintext/ciphertext sk_msg are empty, the send path
gets confused because the empty ciphertext buffer does not have enough
space for the encryption overhead. This causes tls_push_record() to go on
the `split = true` path (which is only supposed to be used when interacting
with an attached BPF program), and then get further confused and hit the
tls_merge_open_record() path, which then assumes that there must be at
least one populated buffer element, leading to a NULL deref.

It is possible to have empty plaintext/ciphertext buffers if we previously
bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path.
tls_sw_push_pending_record() already handles this case correctly; let's do
the same check in tls_sw_splice_eof().

Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush")
Cc: stable@vger.kernel.org
Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com
Signed-off-by: Jann Horn 
Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.com
Signed-off-by: Jakub Kicinski

tls: don't reset prot->aad_size and prot->tail_size for TLS_HW

2023-10-23T17:15:09+00:00

Prior to commit 1a074f7618e8 ("tls: also use init_prot_info in
tls_set_device_offload"), setting TLS_HW on TX didn't touch
prot->aad_size and prot->tail_size. They are set to 0 during context
allocation (tls_prot_info is embedded in tls_context, kzalloc'd by
tls_ctx_create).

When the RX key is configured, tls_set_sw_offload is called (for both
TLS_SW and TLS_HW). If the TX key is configured in TLS_HW mode after
the RX key has been installed, init_prot_info will now overwrite the
correct values of aad_size and tail_size, breaking SW decryption and
causing -EBADMSG errors to be returned to userspace.

Since TLS_HW doesn't use aad_size and tail_size at all (for TLS1.2,
tail_size is always 0, and aad_size is equal to TLS_HEADER_SIZE +
rec_seq_size), we can simply drop this hunk.

Fixes: 1a074f7618e8 ("tls: also use init_prot_info in tls_set_device_offload")
Signed-off-by: Sabrina Dubroca 
Acked-by: Jakub Kicinski 
Tested-by: Ran Rozenstein 
Link: https://lore.kernel.org/r/979d2f89a6a994d5bb49cae49a80be54150d094d.1697653889.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-10-19T20:29:01+00:00

Cross-merge networking fixes after downstream PR.

net/mac80211/key.c
  02e0e426a2fb ("wifi: mac80211: fix error path key leak")
  2a8b665e6bcc ("wifi: mac80211: remove key_mtx")
  7d6904bf26b9 ("Merge wireless into wireless-next")
https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/

Adjacent changes:

drivers/net/ethernet/ti/Kconfig
  a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object")
  98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal")

Signed-off-by: Jakub Kicinski

tcp: allow again tcp_disconnect() when threads are waiting

2023-10-13T23:49:32+00:00

As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.

The blamed commit below caused a regression, as such cancellation
can now fail.

As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.

Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.

Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn 
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet 
Signed-off-by: Paolo Abeni 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski

tls: use fixed size for tls_offload_context_{tx,rx}.driver_state

2023-10-13T10:26:10+00:00

driver_state is a flex array, but is always allocated by the tls core
to a fixed size (TLS_DRIVER_STATE_SIZE_{TX,RX}). Simplify the code by
making that size explicit so that sizeof(struct
tls_offload_context_{tx,rx}) works.

Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

tls: validate crypto_info in a separate helper

2023-10-13T10:26:10+00:00

Simplify do_tls_setsockopt_conf a bit.

Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

tls: remove tls_context argument from tls_set_device_offload

2023-10-13T10:26:10+00:00

It's not really needed since we end up refetching it as tls_ctx. We
can also remove the NULL check, since we have already dereferenced ctx
in do_tls_setsockopt_conf.

While at it, fix up the reverse xmas tree ordering.

Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

tls: remove tls_context argument from tls_set_sw_offload

2023-10-13T10:26:10+00:00

It's not really needed since we end up refetching it as tls_ctx. We
can also remove the NULL check, since we have already dereferenced ctx
in do_tls_setsockopt_conf.

Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller