linux-stable.git/net/tipc, branch v5.4.124

tipc: skb_linearize the head skb when reassembling msgs

2021-06-03T06:59:07+00:00

commit b7df21cf1b79ab7026f545e7bf837bd5750ac026 upstream.

It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.

However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.

The same thing happens with a skb updated by pskb_may_pull() with a
skb_cloned skb. Li Shuang has reported quite a few crashes caused
by this when doing testing over macvlan devices:

  [] kernel BUG at net/core/skbuff.c:1970!
  [] Call Trace:
  []  skb_clone+0x4d/0xb0
  []  macvlan_broadcast+0xd8/0x160 [macvlan]
  []  macvlan_process_broadcast+0x148/0x150 [macvlan]
  []  process_one_work+0x1a7/0x360
  []  worker_thread+0x30/0x390

  [] kernel BUG at mm/usercopy.c:102!
  [] Call Trace:
  []  __check_heap_object+0xd3/0x100
  []  __check_object_size+0xff/0x16b
  []  simple_copy_to_iter+0x1c/0x30
  []  __skb_datagram_iter+0x7d/0x310
  []  __skb_datagram_iter+0x2a5/0x310
  []  skb_copy_datagram_iter+0x3b/0x90
  []  tipc_recvmsg+0x14a/0x3a0 [tipc]
  []  ____sys_recvmsg+0x91/0x150
  []  ___sys_recvmsg+0x7b/0xc0

  [] kernel BUG at mm/slub.c:305!
  [] Call Trace:
  []  
  []  kmem_cache_free+0x3ff/0x400
  []  __netif_receive_skb_core+0x12c/0xc40
  []  ? kmem_cache_alloc+0x12e/0x270
  []  netif_receive_skb_internal+0x3d/0xb0
  []  ? get_rx_page_info+0x8e/0xa0 [be2net]
  []  be_poll+0x6ef/0xd00 [be2net]
  []  ? irq_exit+0x4f/0x100
  []  net_rx_action+0x149/0x3b0

  ...

This patch is to fix it by linearizing the head skb if it has frag_list
set in tipc_buf_append(). Note that we choose to do this before calling
skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can
not just drop the frag_list either as the early time.

Fixes: 45c8b7b175ce ("tipc: allow non-linear first fragment buffer")
Reported-by: Li Shuang 
Signed-off-by: Xin Long 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: wait and exit until all work queues are done

2021-06-03T06:59:07+00:00

commit 04c26faa51d1e2fe71cf13c45791f5174c37f986 upstream.

On some host, a crash could be triggered simply by repeating these
commands several times:

  # modprobe tipc
  # tipc bearer enable media udp name UDP1 localip 127.0.0.1
  # rmmod tipc

  [] BUG: unable to handle kernel paging request at ffffffffc096bb00
  [] Workqueue: events 0xffffffffc096bb00
  [] Call Trace:
  []  ? process_one_work+0x1a7/0x360
  []  ? worker_thread+0x30/0x390
  []  ? create_worker+0x1a0/0x1a0
  []  ? kthread+0x116/0x130
  []  ? kthread_flush_work_fn+0x10/0x10
  []  ? ret_from_fork+0x35/0x40

When removing the TIPC module, the UDP tunnel sock will be delayed to
release in a work queue as sock_release() can't be done in rtnl_lock().
If the work queue is schedule to run after the TIPC module is removed,
kernel will crash as the work queue function cleanup_beareri() code no
longer exists when trying to invoke it.

To fix it, this patch introduce a member wq_count in tipc_net to track
the numbers of work queues in schedule, and  wait and exit until all
work queues are done in tipc_exit_net().

Fixes: d0f91938bede ("tipc: add ip/udp media type")
Reported-by: Shuang Li 
Signed-off-by: Xin Long 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv"

2021-06-03T06:59:07+00:00

commit 75016891357a628d2b8acc09e2b9b2576c18d318 upstream.

This reverts commit 6bf24dc0cc0cc43b29ba344b66d78590e687e046.
Above fix is not correct and caused memory leak issue.

Fixes: 6bf24dc0cc0c ("net:tipc: Fix a double free in tipc_sk_mcast_rcv")
Acked-by: Jon Maloy 
Acked-by: Tung Nguyen 
Signed-off-by: Hoang Le 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: convert dest node's address to network order

2021-05-19T08:08:20+00:00

[ Upstream commit 1980d37565061ab44bdc2f9e4da477d3b9752e81 ]

(struct tipc_link_info)->dest is in network order (__be32), so we must
convert the value to network order before assigning. The problem detected
by sparse:

net/tipc/netlink_compat.c:699:24: warning: incorrect type in assignment (different base types)
net/tipc/netlink_compat.c:699:24:    expected restricted __be32 [usertype] dest
net/tipc/netlink_compat.c:699:24:    got int

Acked-by: Jon Maloy 
Signed-off-by: Hoang Le 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net:tipc: Fix a double free in tipc_sk_mcast_rcv

2021-04-14T06:24:15+00:00

[ Upstream commit 6bf24dc0cc0cc43b29ba344b66d78590e687e046 ]

In the if(skb_peek(arrvq) == skb) branch, it calls __skb_dequeue(arrvq) to get
the skb by skb = skb_peek(arrvq). Then __skb_dequeue() unlinks the skb from arrvq
and returns the skb which equals to skb_peek(arrvq). After __skb_dequeue(arrvq)
finished, the skb is freed by kfree_skb(__skb_dequeue(arrvq)) in the first time.

Unfortunately, the same skb is freed in the second time by kfree_skb(skb) after
the branch completed.

My patch removes kfree_skb() in the if(skb_peek(arrvq) == skb) branch, because
this skb will be freed by kfree_skb(skb) finally.

Fixes: cb1b728096f54 ("tipc: eliminate race condition at multicast reception")
Signed-off-by: Lv Yunlong 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

tipc: fix NULL deref in tipc_link_xmit()

2021-01-23T14:58:00+00:00

[ Upstream commit b77413446408fdd256599daf00d5be72b5f3e7c6 ]

The buffer list can have zero skb as following path:
tipc_named_node_up()->tipc_node_xmit()->tipc_link_xmit(), so
we need to check the list before casting an &sk_buff.

Fault report:
 [] tipc: Bulk publication failure
 [] general protection fault, probably for non-canonical [#1] PREEMPT [...]
 [] KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf]
 [] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 5.10.0-rc4+ #2
 [] Hardware name: Bochs ..., BIOS Bochs 01/01/2011
 [] RIP: 0010:tipc_link_xmit+0xc1/0x2180
 [] Code: 24 b8 00 00 00 00 4d 39 ec 4c 0f 44 e8 e8 d7 0a 10 f9 48 [...]
 [] RSP: 0018:ffffc90000006ea0 EFLAGS: 00010202
 [] RAX: dffffc0000000000 RBX: ffff8880224da000 RCX: 1ffff11003d3cc0d
 [] RDX: 0000000000000019 RSI: ffffffff886007b9 RDI: 00000000000000c8
 [] RBP: ffffc90000007018 R08: 0000000000000001 R09: fffff52000000ded
 [] R10: 0000000000000003 R11: fffff52000000dec R12: ffffc90000007148
 [] R13: 0000000000000000 R14: 0000000000000000 R15: ffffc90000007018
 [] FS:  0000000000000000(0000) GS:ffff888037400000(0000) knlGS:000[...]
 [] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [] CR2: 00007fffd2db5000 CR3: 000000002b08f000 CR4: 00000000000006f0

Fixes: af9b028e270fd ("tipc: make media xmit call outside node spinlock context")
Acked-by: Jon Maloy 
Signed-off-by: Hoang Le 
Link: https://lore.kernel.org/r/20210108071337.3598-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

tipc: fix a deadlock when flushing scheduled work

2020-12-11T12:23:32+00:00

commit d966ddcc38217a6110a6a0ff37ad2dee7d42e23e upstream.

In the commit fdeba99b1e58
("tipc: fix use-after-free in tipc_bcast_get_mode"), we're trying
to make sure the tipc_net_finalize_work work item finished if it
enqueued. But calling flush_scheduled_work() is not just affecting
above work item but either any scheduled work. This has turned out
to be overkill and caused to deadlock as syzbot reported:

======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc2-next-20200828-syzkaller #0 Not tainted
------------------------------------------------------
kworker/u4:6/349 is trying to acquire lock:
ffff8880aa063d38 ((wq_completion)events){+.+.}-{0:0}, at: flush_workqueue+0xe1/0x13e0 kernel/workqueue.c:2777

but task is already holding lock:
ffffffff8a879430 (pernet_ops_rwsem){++++}-{3:3}, at: cleanup_net+0x9b/0xb10 net/core/net_namespace.c:565

[...]
 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(pernet_ops_rwsem);
                               lock(&sb->s_type->i_mutex_key#13);
                               lock(pernet_ops_rwsem);
  lock((wq_completion)events);

 *** DEADLOCK ***
[...]

v1:
To fix the original issue, we replace above calling by introducing
a bit flag. When a namespace cleaned-up, bit flag is set to zero and:
- tipc_net_finalize functionial just does return immediately.
- tipc_net_finalize_work does not enqueue into the scheduled work queue.

v2:
Use cancel_work_sync() helper to make sure ONLY the
tipc_net_finalize_work() stopped before releasing bcbase object.

Reported-by: syzbot+d5aa7e0385f6a5d0f4fd@syzkaller.appspotmail.com
Fixes: fdeba99b1e58 ("tipc: fix use-after-free in tipc_bcast_get_mode")
Acked-by: Jon Maloy 
Signed-off-by: Hoang Huu Le 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

tipc: fix memory leak in tipc_topsrv_start()

2020-11-18T18:20:33+00:00

[ Upstream commit fa6882c63621821f73cc806f291208e1c6ea6187 ]

kmemleak report a memory leak as follows:

unreferenced object 0xffff88810a596800 (size 512):
  comm "ip", pid 21558, jiffies 4297568990 (age 112.120s)
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff 00 83 60 b0 ff ff ff ff  ..........`.....
  backtrace:
    [<0000000022bbe21f>] tipc_topsrv_init_net+0x1f3/0xa70
    [<00000000fe15ddf7>] ops_init+0xa8/0x3c0
    [<00000000138af6f2>] setup_net+0x2de/0x7e0
    [<000000008c6807a3>] copy_net_ns+0x27d/0x530
    [<000000006b21adbd>] create_new_namespaces+0x382/0xa30
    [<00000000bb169746>] unshare_nsproxy_namespaces+0xa1/0x1d0
    [<00000000fe2e42bc>] ksys_unshare+0x39c/0x780
    [<0000000009ba3b19>] __x64_sys_unshare+0x2d/0x40
    [<00000000614ad866>] do_syscall_64+0x56/0xa0
    [<00000000a1b5ca3c>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

'srv' is malloced in tipc_topsrv_start() but not free before
leaving from the error handling cases. We need to free it.

Fixes: 5c45ab24ac77 ("tipc: make struct tipc_server private for server.c")
Reported-by: Hulk Robot 
Signed-off-by: Wang Hai 
Link: https://lore.kernel.org/r/20201109140913.47370-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

tipc: fix use-after-free in tipc_bcast_get_mode

2020-11-10T11:37:24+00:00

commit fdeba99b1e58ecd18c2940c453e19e4ef20ff591 upstream.

Syzbot has reported those issues as:

==================================================================
BUG: KASAN: use-after-free in tipc_bcast_get_mode+0x3ab/0x400 net/tipc/bcast.c:759
Read of size 1 at addr ffff88805e6b3571 by task kworker/0:6/3850

CPU: 0 PID: 3850 Comm: kworker/0:6 Not tainted 5.8.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events tipc_net_finalize_work

Thread 1's call trace:
[...]
  kfree+0x103/0x2c0 mm/slab.c:3757 <- bcbase releasing
  tipc_bcast_stop+0x1b0/0x2f0 net/tipc/bcast.c:721
  tipc_exit_net+0x24/0x270 net/tipc/core.c:112
[...]

Thread 2's call trace:
[...]
  tipc_bcast_get_mode+0x3ab/0x400 net/tipc/bcast.c:759 <- bcbase
has already been freed by Thread 1

  tipc_node_broadcast+0x9e/0xcc0 net/tipc/node.c:1744
  tipc_nametbl_publish+0x60b/0x970 net/tipc/name_table.c:752
  tipc_net_finalize net/tipc/net.c:141 [inline]
  tipc_net_finalize+0x1fa/0x310 net/tipc/net.c:131
  tipc_net_finalize_work+0x55/0x80 net/tipc/net.c:150
[...]

==================================================================
BUG: KASAN: use-after-free in tipc_named_reinit+0xef/0x290 net/tipc/name_distr.c:344
Read of size 8 at addr ffff888052ab2000 by task kworker/0:13/30628
CPU: 0 PID: 30628 Comm: kworker/0:13 Not tainted 5.8.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events tipc_net_finalize_work
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1f0/0x31e lib/dump_stack.c:118
 print_address_description+0x66/0x5a0 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report+0x132/0x1d0 mm/kasan/report.c:530
 tipc_named_reinit+0xef/0x290 net/tipc/name_distr.c:344
 tipc_net_finalize+0x85/0xe0 net/tipc/net.c:138
 tipc_net_finalize_work+0x50/0x70 net/tipc/net.c:150
 process_one_work+0x789/0xfc0 kernel/workqueue.c:2269
 worker_thread+0xaa4/0x1460 kernel/workqueue.c:2415
 kthread+0x37e/0x3a0 drivers/block/aoe/aoecmd.c:1234
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293
[...]
Freed by task 14058:
 save_stack mm/kasan/common.c:48 [inline]
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0x114/0x170 mm/kasan/common.c:455
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x10a/0x220 mm/slab.c:3757
 tipc_exit_net+0x29/0x50 net/tipc/core.c:113
 ops_exit_list net/core/net_namespace.c:186 [inline]
 cleanup_net+0x708/0xba0 net/core/net_namespace.c:603
 process_one_work+0x789/0xfc0 kernel/workqueue.c:2269
 worker_thread+0xaa4/0x1460 kernel/workqueue.c:2415
 kthread+0x37e/0x3a0 drivers/block/aoe/aoecmd.c:1234
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

Fix it by calling flush_scheduled_work() to make sure the
tipc_net_finalize_work() stopped before releasing bcbase object.

Reported-by: syzbot+6ea1f7a8df64596ef4d7@syzkaller.appspotmail.com
Reported-by: syzbot+e9cc557752ab126c1b99@syzkaller.appspotmail.com
Acked-by: Jon Maloy 
Signed-off-by: Hoang Huu Le 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: fix memory leak caused by tipc_buf_append()

2020-11-01T11:01:04+00:00

[ Upstream commit ceb1eb2fb609c88363e06618b8d4bbf7815a4e03 ]

Commit ed42989eab57 ("tipc: fix the skb_unshare() in tipc_buf_append()")
replaced skb_unshare() with skb_copy() to not reduce the data reference
counter of the original skb intentionally. This is not the correct
way to handle the cloned skb because it causes memory leak in 2
following cases:
 1/ Sending multicast messages via broadcast link
  The original skb list is cloned to the local skb list for local
  destination. After that, the data reference counter of each skb
  in the original list has the value of 2. This causes each skb not
  to be freed after receiving ACK:
  tipc_link_advance_transmq()
  {
   ...
   /* release skb */
   __skb_unlink(skb, &l->transmq);
   kfree_skb(skb); <-- memory exists after being freed
  }

 2/ Sending multicast messages via replicast link
  Similar to the above case, each skb cannot be freed after purging
  the skb list:
  tipc_mcast_xmit()
  {
   ...
   __skb_queue_purge(pkts); <-- memory exists after being freed
  }

This commit fixes this issue by using skb_unshare() instead. Besides,
to avoid use-after-free error reported by KASAN, the pointer to the
fragment is set to NULL before calling skb_unshare() to make sure that
the original skb is not freed after freeing the fragment 2 times in
case skb_unshare() returns NULL.

Fixes: ed42989eab57 ("tipc: fix the skb_unshare() in tipc_buf_append()")
Acked-by: Jon Maloy 
Reported-by: Thang Hoang Ngo 
Signed-off-by: Tung Nguyen 
Reviewed-by: Xin Long 
Acked-by: Cong Wang 
Link: https://lore.kernel.org/r/20201027032403.1823-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman