linux-stable.git/net/tipc, branch v4.19.151

tipc: fix memory leak in service subscripting

2020-10-01T11:14:44+00:00

[ Upstream commit 0771d7df819284d46cf5cfb57698621b503ec17f ]

Upon receipt of a service subscription request from user via a topology
connection, one 'sub' object will be allocated in kernel, so it will be
able to send an event of the service if any to the user correspondingly
then. Also, in case of any failure, the connection will be shutdown and
all the pertaining 'sub' objects will be freed.

However, there is a race condition as follows resulting in memory leak:

       receive-work       connection        send-work
              |                |                |
        sub-1 |<------//-------|                |
        sub-2 |<------//-------|                |
              |                |<---------------| evt for sub-x
        sub-3 |<------//-------|                |
              :                :                :
              :                :                :
              |       /--------|                |
              |       |        * peer closed    |
              |       |        |                |
              |       |        |<-------X-------| evt for sub-y
              |       |        |<===============|
        sub-n |<------/        X    shutdown    |
    -> orphan |                                 |

That is, the 'receive-work' may get the last subscription request while
the 'send-work' is shutting down the connection due to peer close.

We had a 'lock' on the connection, so the two actions cannot be carried
out simultaneously. If the last subscription is allocated e.g. 'sub-n',
before the 'send-work' closes the connection, there will be no issue at
all, the 'sub' objects will be freed. In contrast the last subscription
will become orphan since the connection was closed, and we released all
references.

This commit fixes the issue by simply adding one test if the connection
remains in 'connected' state right after we obtain the connection lock,
then a subscription object can be created as usual, otherwise we ignore
it.

Acked-by: Ying Xue 
Acked-by: Jon Maloy 
Reported-by: Thang Ngo 
Signed-off-by: Tuong Lien 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

tipc: use skb_unshare() instead in tipc_buf_append()

2020-09-26T16:01:30+00:00

[ Upstream commit ff48b6222e65ebdba5a403ef1deba6214e749193 ]

In tipc_buf_append() it may change skb's frag_list, and it causes
problems when this skb is cloned. skb_unclone() doesn't really
make this skb's flag_list available to change.

Shuang Li has reported an use-after-free issue because of this
when creating quite a few macvlan dev over the same dev, where
the broadcast packets will be cloned and go up to the stack:

 [ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0
 [ ] Call Trace:
 [ ]  dump_stack+0x7c/0xb0
 [ ]  print_address_description.constprop.7+0x1a/0x220
 [ ]  kasan_report.cold.10+0x37/0x7c
 [ ]  check_memory_region+0x183/0x1e0
 [ ]  pskb_expand_head+0x86d/0xea0
 [ ]  process_backlog+0x1df/0x660
 [ ]  net_rx_action+0x3b4/0xc90
 [ ]
 [ ] Allocated by task 1786:
 [ ]  kmem_cache_alloc+0xbf/0x220
 [ ]  skb_clone+0x10a/0x300
 [ ]  macvlan_broadcast+0x2f6/0x590 [macvlan]
 [ ]  macvlan_process_broadcast+0x37c/0x516 [macvlan]
 [ ]  process_one_work+0x66a/0x1060
 [ ]  worker_thread+0x87/0xb10
 [ ]
 [ ] Freed by task 3253:
 [ ]  kmem_cache_free+0x82/0x2a0
 [ ]  skb_release_data+0x2c3/0x6e0
 [ ]  kfree_skb+0x78/0x1d0
 [ ]  tipc_recvmsg+0x3be/0xa40 [tipc]

So fix it by using skb_unshare() instead, which would create a new
skb for the cloned frag and it'll be safe to change its frag_list.
The similar things were also done in sctp_make_reassembled_event(),
which is using skb_copy().

Reported-by: Shuang Li 
Fixes: 37e22164a8a3 ("tipc: rename and move message reassembly function")
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: fix shutdown() of connection oriented socket

2020-09-26T16:01:30+00:00

[ Upstream commit a4b5cc9e10803ecba64a7d54c0f47e4564b4a980 ]

I confirmed that the problem fixed by commit 2a63866c8b51a3f7 ("tipc: fix
shutdown() of connectionless socket") also applies to stream socket.

----------
#include 
#include 
#include 

int main(int argc, char *argv[])
{
        int fds[2] = { -1, -1 };
        socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
        if (fork() == 0)
                _exit(read(fds[0], NULL, 1));
        shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
        wait(NULL); /* To be woken up by _exit(). */
        return 0;
}
----------

Since shutdown(SHUT_RDWR) should affect all processes sharing that socket,
unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right
behavior.

Signed-off-by: Tetsuo Handa 
Acked-by: Ying Xue 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: Fix memory leak in tipc_group_create_member()

2020-09-26T16:01:30+00:00

[ Upstream commit bb3a420d47ab00d7e1e5083286cab15235a96680 ]

tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an
existing node, causing tipc_group_create_member() to leak memory. Let
tipc_group_add_to_tree() return an error in such a case, so that
tipc_group_create_member() can handle it properly.

Fixes: 75da2163dbb6 ("tipc: introduce communication groups")
Reported-and-tested-by: syzbot+f95d90c454864b3b5bc9@syzkaller.appspotmail.com
Cc: Hillf Danton 
Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13aff
Signed-off-by: Peilin Ye 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: fix shutdown() of connectionless socket

2020-09-12T11:40:22+00:00

[ Upstream commit 2a63866c8b51a3f72cea388dfac259d0e14c4ba6 ]

syzbot is reporting hung task at nbd_ioctl() [1], for there are two
problems regarding TIPC's connectionless socket's shutdown() operation.

----------
#include 
#include 
#include 
#include 
#include 

int main(int argc, char *argv[])
{
        const int fd = open("/dev/nbd0", 3);
        alarm(5);
        ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0));
        ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */
        return 0;
}
----------

One problem is that wait_for_completion() from flush_workqueue() from
nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when
nbd_start_device_ioctl() received a signal at wait_event_interruptible(),
for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from
nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl()
is failing to wake up a WQ thread sleeping at wait_woken() from
tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from
nbd_read_stat() from recv_work() scheduled by nbd_start_device() from
nbd_start_device_ioctl(). Fix this problem by always invoking
sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is
called.

The other problem is that tipc_wait_for_rcvmsg() cannot return when
tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to
SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg()
needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this
problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown()
does) when the socket is connectionless.

[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2

Reported-by: syzbot 
Signed-off-by: Tetsuo Handa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: fix uninit skb->data in tipc_nl_compat_dumpit()

2020-09-03T09:24:17+00:00

[ Upstream commit 47733f9daf4fe4f7e0eb9e273f21ad3a19130487 ]

__tipc_nl_compat_dumpit() has two callers, and it expects them to
pass a valid nlmsghdr via arg->data. This header is artificial and
crafted just for __tipc_nl_compat_dumpit().

tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well
as some nested attribute, TIPC_NLA_SOCK. But the other caller
tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized
on this call path.

Fix this by just adding a similar nlmsghdr without any payload in
tipc_nl_compat_dumpit().

This bug exists since day 1, but the recent commit 6ea67769ff33
("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it
easier to appear.

Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com
Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat")
Cc: Jon Maloy 
Cc: Ying Xue 
Cc: Richard Alpe 
Signed-off-by: Cong Wang 
Acked-by: Ying Xue 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: clean up skb list lock handling on send path

2020-07-29T08:16:47+00:00

commit e654f9f53b45fde3fcc8051830b212c7a8f36148 upstream.

The policy for handling the skb list locks on the send and receive paths
is simple.

- On the send path we never need to grab the lock on the 'xmitq' list
  when the destination is an exernal node.

- On the receive path we always need to grab the lock on the 'inputq'
  list, irrespective of source node.

However, when transmitting node local messages those will eventually
end up on the receive path of a local socket, meaning that the argument
'xmitq' in tipc_node_xmit() will become the 'ínputq' argument in  the
function tipc_sk_rcv(). This has been handled by always initializing
the spinlock of the 'xmitq' list at message creation, just in case it
may end up on the receive path later, and despite knowing that the lock
in most cases never will be used.

This approach is inaccurate and confusing, and has also concealed the
fact that the stated 'no lock grabbing' policy for the send path is
violated in some cases.

We now clean up this by never initializing the lock at message creation,
instead doing this at the moment we find that the message actually will
enter the receive path. At the same time we fix the four locations
where we incorrectly access the spinlock on the send/error path.

This patch also reverts commit d12cffe9329f ("tipc: ensure head->lock
is initialised") which has now become redundant.

CC: Eric Dumazet 
Reported-by: Chris Packham 
Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Reviewed-by: Xin Long 
Signed-off-by: David S. Miller 
[acj: backport v4.19 -stable
- adjust context
- skipped the hunk modifying non-existent function tipc_mcast_send_sync
- additional comment ]
Signed-off-by: Aviraj CJ 
Signed-off-by: Greg Kroah-Hartman

tipc: fix partial topology connection closure

2020-05-14T05:57:18+00:00

[ Upstream commit 980d69276f3048af43a045be2925dacfb898a7be ]

When an application connects to the TIPC topology server and subscribes
to some services, a new connection is created along with some objects -
'tipc_subscription' to store related data correspondingly...
However, there is one omission in the connection handling that when the
connection or application is orderly shutdown (e.g. via SIGQUIT, etc.),
the connection is not closed in kernel, the 'tipc_subscription' objects
are not freed too.
This results in:
- The maximum number of subscriptions (65535) will be reached soon, new
subscriptions will be rejected;
- TIPC module cannot be removed (unless the objects  are somehow forced
to release first);

The commit fixes the issue by closing the connection if the 'recvmsg()'
returns '0' i.e. when the peer is shutdown gracefully. It also includes
the other unexpected cases.

Acked-by: Jon Maloy 
Acked-by: Ying Xue 
Signed-off-by: Tuong Lien 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookup

2020-04-29T14:31:17+00:00

commit 6c8991f41546c3c472503dff1ea9daaddf9331c2 upstream.

ipv6_stub uses the ip6_dst_lookup function to allow other modules to
perform IPv6 lookups. However, this function skips the XFRM layer
entirely.

All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the
ip_route_output_key and ip_route_output helpers) for their IPv4 lookups,
which calls xfrm_lookup_route(). This patch fixes this inconsistent
behavior by switching the stub to ip6_dst_lookup_flow, which also calls
xfrm_lookup_route().

This requires some changes in all the callers, as these two functions
take different arguments and have different return types.

Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan")
Reported-by: Xiumei Mu 
Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller 
[bwh: Backported to 4.19:
 - Drop change in lwt_bpf.c
 - Delete now-unused "ret" in mlx5e_route_lookup_ipv6()
 - Initialise "out_dev" in mlx5e_create_encap_header_ipv6() to avoid
   introducing a spurious "may be used uninitialised" warning
 - Adjust filenames, context, indentation]
Signed-off-by: Ben Hutchings 
Signed-off-by: Sasha Levin

tipc: add missing attribute validation for MTU property

2020-03-18T06:14:18+00:00

[ Upstream commit 213320a67962ff6e7b83b704d55cbebc341426db ]

Add missing attribute validation for TIPC_NLA_PROP_MTU
to the netlink policy.

Fixes: 901271e0403a ("tipc: implement configuration of UDP media MTU")
Signed-off-by: Jakub Kicinski 
Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman