linux-stable.git/net/tipc/socket.c, branch v4.19.201

tipc: fix sleeping in tipc accept routine

2021-08-04T10:23:46+00:00

[ Upstream commit d237a7f11719ff9320721be5818352e48071aab6 ]

The release_sock() is blocking function, it would change the state
after sleeping. In order to evaluate the stated condition outside
the socket lock context, switch to use wait_woken() instead.

Fixes: 6398e23cdb1d8 ("tipc: standardize accept routine")
Acked-by: Jon Maloy 
Signed-off-by: Hoang Le 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv"

2021-06-03T06:38:08+00:00

commit 75016891357a628d2b8acc09e2b9b2576c18d318 upstream.

This reverts commit 6bf24dc0cc0cc43b29ba344b66d78590e687e046.
Above fix is not correct and caused memory leak issue.

Fixes: 6bf24dc0cc0c ("net:tipc: Fix a double free in tipc_sk_mcast_rcv")
Acked-by: Jon Maloy 
Acked-by: Tung Nguyen 
Signed-off-by: Hoang Le 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net:tipc: Fix a double free in tipc_sk_mcast_rcv

2021-04-14T06:22:35+00:00

[ Upstream commit 6bf24dc0cc0cc43b29ba344b66d78590e687e046 ]

In the if(skb_peek(arrvq) == skb) branch, it calls __skb_dequeue(arrvq) to get
the skb by skb = skb_peek(arrvq). Then __skb_dequeue() unlinks the skb from arrvq
and returns the skb which equals to skb_peek(arrvq). After __skb_dequeue(arrvq)
finished, the skb is freed by kfree_skb(__skb_dequeue(arrvq)) in the first time.

Unfortunately, the same skb is freed in the second time by kfree_skb(skb) after
the branch completed.

My patch removes kfree_skb() in the if(skb_peek(arrvq) == skb) branch, because
this skb will be freed by kfree_skb(skb) finally.

Fixes: cb1b728096f54 ("tipc: eliminate race condition at multicast reception")
Signed-off-by: Lv Yunlong 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

tipc: fix shutdown() of connection oriented socket

2020-09-26T16:01:30+00:00

[ Upstream commit a4b5cc9e10803ecba64a7d54c0f47e4564b4a980 ]

I confirmed that the problem fixed by commit 2a63866c8b51a3f7 ("tipc: fix
shutdown() of connectionless socket") also applies to stream socket.

----------
#include 
#include 
#include 

int main(int argc, char *argv[])
{
        int fds[2] = { -1, -1 };
        socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
        if (fork() == 0)
                _exit(read(fds[0], NULL, 1));
        shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
        wait(NULL); /* To be woken up by _exit(). */
        return 0;
}
----------

Since shutdown(SHUT_RDWR) should affect all processes sharing that socket,
unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right
behavior.

Signed-off-by: Tetsuo Handa 
Acked-by: Ying Xue 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: fix shutdown() of connectionless socket

2020-09-12T11:40:22+00:00

[ Upstream commit 2a63866c8b51a3f72cea388dfac259d0e14c4ba6 ]

syzbot is reporting hung task at nbd_ioctl() [1], for there are two
problems regarding TIPC's connectionless socket's shutdown() operation.

----------
#include 
#include 
#include 
#include 
#include 

int main(int argc, char *argv[])
{
        const int fd = open("/dev/nbd0", 3);
        alarm(5);
        ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0));
        ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */
        return 0;
}
----------

One problem is that wait_for_completion() from flush_workqueue() from
nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when
nbd_start_device_ioctl() received a signal at wait_event_interruptible(),
for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from
nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl()
is failing to wake up a WQ thread sleeping at wait_woken() from
tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from
nbd_read_stat() from recv_work() scheduled by nbd_start_device() from
nbd_start_device_ioctl(). Fix this problem by always invoking
sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is
called.

The other problem is that tipc_wait_for_rcvmsg() cannot return when
tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to
SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg()
needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this
problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown()
does) when the socket is connectionless.

[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2

Reported-by: syzbot 
Signed-off-by: Tetsuo Handa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: clean up skb list lock handling on send path

2020-07-29T08:16:47+00:00

commit e654f9f53b45fde3fcc8051830b212c7a8f36148 upstream.

The policy for handling the skb list locks on the send and receive paths
is simple.

- On the send path we never need to grab the lock on the 'xmitq' list
  when the destination is an exernal node.

- On the receive path we always need to grab the lock on the 'inputq'
  list, irrespective of source node.

However, when transmitting node local messages those will eventually
end up on the receive path of a local socket, meaning that the argument
'xmitq' in tipc_node_xmit() will become the 'ínputq' argument in  the
function tipc_sk_rcv(). This has been handled by always initializing
the spinlock of the 'xmitq' list at message creation, just in case it
may end up on the receive path later, and despite knowing that the lock
in most cases never will be used.

This approach is inaccurate and confusing, and has also concealed the
fact that the stated 'no lock grabbing' policy for the send path is
violated in some cases.

We now clean up this by never initializing the lock at message creation,
instead doing this at the moment we find that the message actually will
enter the receive path. At the same time we fix the four locations
where we incorrectly access the spinlock on the send/error path.

This patch also reverts commit d12cffe9329f ("tipc: ensure head->lock
is initialised") which has now become redundant.

CC: Eric Dumazet 
Reported-by: Chris Packham 
Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Reviewed-by: Xin Long 
Signed-off-by: David S. Miller 
[acj: backport v4.19 -stable
- adjust context
- skipped the hunk modifying non-existent function tipc_mcast_send_sync
- additional comment ]
Signed-off-by: Aviraj CJ 
Signed-off-by: Greg Kroah-Hartman

tipc: fix wrong timeout input for tipc_wait_for_cond()

2020-01-27T13:49:52+00:00

commit 12db3c8083fcab4270866a88191933f2d9f24f89 upstream.

In function __tipc_shutdown(), the timeout value passed to
tipc_wait_for_cond() is not jiffies.

This commit fixes it by converting that value from milliseconds
to jiffies.

Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Tung Nguyen 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: use skb_queue_empty_lockless() in poll() handlers

2019-11-10T10:27:48+00:00

[ Upstream commit 3ef7cf57c72f32f61e97f8fa401bc39ea1f1a5d4 ]

Many poll() handlers are lockless. Using skb_queue_empty_lockless()
instead of skb_queue_empty() is more appropriate.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: fix hanging clients using poll with EPOLLOUT flag

2019-05-16T17:41:31+00:00

[ Upstream commit ff946833b70e0c7f93de9a3f5b329b5ae2287b38 ]

commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets")
introduced a regression for clients using non-blocking sockets.
After the commit, we send EPOLLOUT event to the client even in
TIPC_CONNECTING state. This causes the subsequent send() to fail
with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state.

In this commit, we:
- improve the fix for hanging poll() by replacing sk_data_ready()
  with sk_state_change() to wake up all clients.
- revert the faulty updates introduced by commit 517d7c79bdb398
  ("tipc: fix hanging poll() for stream sockets").

Fixes: 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets")
Signed-off-by: Parthasarathy Bhuvaragan 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: allow service ranges to be connect()'ed on RDM/DGRAM

2019-04-03T04:26:18+00:00

[ Upstream commit ea239314fe42ace880bdd834256834679346c80e ]

We move the check that prevents connecting service ranges to after
the RDM/DGRAM check, and move address sanity control to a separate
function that also validates the service range.

Fixes: 23998835be98 ("tipc: improve address sanity check in tipc_connect()")
Signed-off-by: Erik Hugne 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman