linux-stable.git/net/tipc/server.c, branch v4.16.2 Linux kernel stable tree Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2018-01-31T22:31:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-01-31T22:31:10+00:00 b2fe5fa68642860e7de76167c3111623aa0d5de1 Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ... 
Pull networking updates from David Miller:

 1) Significantly shrink the core networking routing structures. Result
    of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf

 2) Add netdevsim driver for testing various offloads, from Jakub
    Kicinski.

 3) Support cross-chip FDB operations in DSA, from Vivien Didelot.

 4) Add a 2nd listener hash table for TCP, similar to what was done for
    UDP. From Martin KaFai Lau.

 5) Add eBPF based queue selection to tun, from Jason Wang.

 6) Lockless qdisc support, from John Fastabend.

 7) SCTP stream interleave support, from Xin Long.

 8) Smoother TCP receive autotuning, from Eric Dumazet.

 9) Lots of erspan tunneling enhancements, from William Tu.

10) Add true function call support to BPF, from Alexei Starovoitov.

11) Add explicit support for GRO HW offloading, from Michael Chan.

12) Support extack generation in more netlink subsystems. From Alexander
    Aring, Quentin Monnet, and Jakub Kicinski.

13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
    Russell King.

14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.

15) Many improvements and simplifications to the NFP driver bpf JIT,
    from Jakub Kicinski.

16) Support for ipv6 non-equal cost multipath routing, from Ido
    Schimmel.

17) Add resource abstration to devlink, from Arkadi Sharshevsky.

18) Packet scheduler classifier shared filter block support, from Jiri
    Pirko.

19) Avoid locking in act_csum, from Davide Caratti.

20) devinet_ioctl() simplifications from Al viro.

21) More TCP bpf improvements from Lawrence Brakmo.

22) Add support for onlink ipv6 route flag, similar to ipv4, from David
    Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
  tls: Add support for encryption using async offload accelerator
  ip6mr: fix stale iterator
  net/sched: kconfig: Remove blank help texts
  openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
  tcp_nv: fix potential integer overflow in tcpnv_acked
  r8169: fix RTL8168EP take too long to complete driver initialization.
  qmi_wwan: Add support for Quectel EP06
  rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
  ipmr: Fix ptrdiff_t print formatting
  ibmvnic: Wait for device response when changing MAC
  qlcnic: fix deadlock bug
  tcp: release sk_frag.page in tcp_disconnect
  ipv4: Get the address of interface correctly.
  net_sched: gen_estimator: fix lockdep splat
  net: macb: Handle HRESP error
  net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
  ipv6: addrconf: break critical section in addrconf_verify_rtnl()
  ipv6: change route cache aging logic
  i40e/i40evf: Update DESC_NEEDED value to reflect larger value
  bnxt_en: cleanup DIM work on device shutdown
  ...
Merge branch 'work.sock_recvmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2018-01-31T02:59:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-01-31T02:59:03+00:00 1ed2d76e0213751c82e3a242b61b0883daf330df Pull kern_recvmsg reduction from Al Viro: "kernel_recvmsg() is a set_fs()-using wrapper for sock_recvmsg(). In all but one case that is not needed - use of ITER_KVEC for ->msg_iter takes care of the data and does not care about set_fs(). The only exception is svc_udp_recvfrom() where we want cmsg to be store into kernel object; everything else can just use sock_recvmsg() and be done with that. A followup converting svc_udp_recvfrom() away from set_fs() (and killing kernel_recvmsg() off) is *NOT* in here - I'd like to hear what netdev folks think of the approach proposed in that followup)" * 'work.sock_recvmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: tipc: switch to sock_recvmsg() smc: switch to sock_recvmsg() ipvs: switch to sock_recvmsg() mISDN: switch to sock_recvmsg() drbd: switch to sock_recvmsg() lustre lnet_sock_read(): switch to sock_recvmsg() cfs2: switch to sock_recvmsg() ncpfs: switch to sock_recvmsg() dlm: switch to sock_recvmsg() svc_recvfrom(): switch to sock_recvmsg() 
Pull kern_recvmsg reduction from Al Viro:
 "kernel_recvmsg() is a set_fs()-using wrapper for sock_recvmsg(). In
  all but one case that is not needed - use of ITER_KVEC for ->msg_iter
  takes care of the data and does not care about set_fs(). The only
  exception is svc_udp_recvfrom() where we want cmsg to be store into
  kernel object; everything else can just use sock_recvmsg() and be done
  with that.

  A followup converting svc_udp_recvfrom() away from set_fs() (and
  killing kernel_recvmsg() off) is *NOT* in here - I'd like to hear what
  netdev folks think of the approach proposed in that followup)"

* 'work.sock_recvmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  tipc: switch to sock_recvmsg()
  smc: switch to sock_recvmsg()
  ipvs: switch to sock_recvmsg()
  mISDN: switch to sock_recvmsg()
  drbd: switch to sock_recvmsg()
  lustre lnet_sock_read(): switch to sock_recvmsg()
  cfs2: switch to sock_recvmsg()
  ncpfs: switch to sock_recvmsg()
  dlm: switch to sock_recvmsg()
  svc_recvfrom(): switch to sock_recvmsg()
tipc: fix race condition at topology server receive 2018-01-16T19:42:41+00:00 Jon Maloy jon.maloy@ericsson.com 2018-01-15T16:56:28+00:00 e88f2be83282d5ffc8f5ffe4c22606bf62eb1ac7 We have identified a race condition during reception of socket events and messages in the topology server. - The function tipc_close_conn() is releasing the corresponding struct tipc_subscriber instance without considering that there may still be items in the receive work queue. When those are scheduled, in the function tipc_receive_from_work(), they are using the subscriber pointer stored in struct tipc_conn, without first checking if this is valid or not. This will sometimes lead to crashes, as the next call of tipc_conn_recvmsg() will access the now deleted item. We fix this by making the usage of this pointer conditional on whether the connection is active or not. I.e., we check the condition test_bit(CF_CONNECTED) before making the call tipc_conn_recvmsg(). - Since the two functions may be running on different cores, the condition test described above is not enough. tipc_close_conn() may come in between and delete the subscriber item after the condition test is done, but before tipc_conn_recv_msg() is finished. This happens less frequently than the problem described above, but leads to the same symptoms. We fix this by using the existing sk_callback_lock for mutual exclusion in the two functions. In addition, we have to move a call to tipc_conn_terminate() outside the mentioned lock to avoid deadlock. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
We have identified a race condition during reception of socket
events and messages in the topology server.

- The function tipc_close_conn() is releasing the corresponding
  struct tipc_subscriber instance without considering that there
  may still be items in the receive work queue. When those are
  scheduled, in the function tipc_receive_from_work(), they are
  using the subscriber pointer stored in struct tipc_conn, without
  first checking if this is valid or not. This will sometimes
  lead to crashes, as the next call of tipc_conn_recvmsg() will
  access the now deleted item.
  We fix this by making the usage of this pointer conditional on
  whether the connection is active or not. I.e., we check the condition
  test_bit(CF_CONNECTED) before making the call tipc_conn_recvmsg().

- Since the two functions may be running on different cores, the
  condition test described above is not enough. tipc_close_conn()
  may come in between and delete the subscriber item after the condition
  test is done, but before tipc_conn_recv_msg() is finished. This
  happens less frequently than the problem described above, but leads
  to the same symptoms.

  We fix this by using the existing sk_callback_lock for mutual
  exclusion in the two functions. In addition, we have to move
  a call to tipc_conn_terminate() outside the mentioned lock to
  avoid deadlock.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: improve groupcast scope handling 2018-01-09T17:35:58+00:00 Jon Maloy jon.maloy@ericsson.com 2018-01-08T20:03:30+00:00 232d07b74a33b9f5d48516dc1d8ce41723ada593 When a member joins a group, it also indicates a binding scope. This makes it possible to create both node local groups, invisible to other nodes, as well as cluster global groups, visible everywhere. In order to avoid that different members end up having permanently differing views of group size and memberhip, we must inhibit locally and globally bound members from joining the same group. We do this by using the binding scope as an additional separator between groups. I.e., a member must ignore all membership events from sockets using a different scope than itself, and all lookups for message destinations must require an exact match between the message's lookup scope and the potential target's binding scope. Apart from making it possible to create local groups using the same identity on different nodes, a side effect of this is that it now also becomes possible to create a cluster global group with the same identity across the same nodes, without interfering with the local groups. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When a member joins a group, it also indicates a binding scope. This
makes it possible to create both node local groups, invisible to other
nodes, as well as cluster global groups, visible everywhere.

In order to avoid that different members end up having permanently
differing views of group size and memberhip, we must inhibit locally
and globally bound members from joining the same group.

We do this by using the binding scope as an additional separator between
groups. I.e., a member must ignore all membership events from sockets
using a different scope than itself, and all lookups for message
destinations must require an exact match between the message's lookup
scope and the potential target's binding scope.

Apart from making it possible to create local groups using the same
identity on different nodes, a side effect of this is that it now also
becomes possible to create a cluster global group with the same identity
across the same nodes, without interfering with the local groups.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: add option to suppress PUBLISH events for pre-existing publications 2018-01-09T17:35:58+00:00 Jon Maloy jon.maloy@ericsson.com 2018-01-08T20:03:29+00:00 8348500f80d5660af29c475e1f15d412d83564c9 Currently, when a user is subscribing for binding table publications, he will receive a PUBLISH event for all already existing matching items in the binding table. However, a group socket making a subscriptions doesn't need this initial status update from the binding table, because it has already scanned it during the join operation. Worse, the multiplicatory effect of issuing mutual events for dozens or hundreds group members within a short time frame put a heavy load on the topology server, with the end result that scale out operations on a big group tend to take much longer than needed. We now add a new filter option, TIPC_SUB_NO_STATUS, for topology server subscriptions, so that this initial avalanche of events is suppressed. This change, along with the previous commit, significantly improves the range and speed of group scale out operations. We keep the new option internal for the tipc driver, at least for now. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Currently, when a user is subscribing for binding table publications,
he will receive a PUBLISH event for all already existing matching items
in the binding table.

However, a group socket making a subscriptions doesn't need this initial
status update from the binding table, because it has already scanned it
during the join operation. Worse, the multiplicatory effect of issuing
mutual events for dozens or hundreds group members within a short time
frame put a heavy load on the topology server, with the end result that
scale out operations on a big group tend to take much longer than needed.

We now add a new filter option, TIPC_SUB_NO_STATUS, for topology server
subscriptions, so that this initial avalanche of events is suppressed.
This change, along with the previous commit, significantly improves the
range and speed of group scale out operations.

We keep the new option internal for the tipc driver, at least for now.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: fix memory leak in tipc_accept_from_sock() 2017-12-05T19:52:41+00:00 Jon Maloy jon.maloy@ericsson.com 2017-12-04T21:00:20+00:00 a7d5f107b4978e08eeab599ee7449af34d034053 When the function tipc_accept_from_sock() fails to create an instance of struct tipc_subscriber it omits to free the already created instance of struct tipc_conn instance before it returns. We fix that with this commit. Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When the function tipc_accept_from_sock() fails to create an instance of
struct tipc_subscriber it omits to free the already created instance of
struct tipc_conn instance before it returns.

We fix that with this commit.

Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: fix a null pointer deref on error path 2017-12-05T19:51:59+00:00 Cong Wang xiyou.wangcong@gmail.com 2017-12-04T18:31:43+00:00 672ecbe1c977616aa720c9397589665b33e72610 In tipc_topsrv_kern_subscr() when s->tipc_conn_new() fails we call tipc_close_conn() to clean up, but in this case calling conn_put() is just enough. This fixes the folllowing crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 3085 Comm: syzkaller064164 Not tainted 4.15.0-rc1+ #137 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: 00000000c24413a5 task.stack: 000000005e8160b5 RIP: 0010:__lock_acquire+0xd55/0x47f0 kernel/locking/lockdep.c:3378 RSP: 0018:ffff8801cb5474a8 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff85ecb400 RBP: ffff8801cb547830 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff87489d60 R12: ffff8801cd2980c0 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000020 FS: 00000000014ee880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffee2426e40 CR3: 00000001cb85a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:4004 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:320 [inline] tipc_subscrb_subscrp_delete+0x8f/0x470 net/tipc/subscr.c:201 tipc_subscrb_delete net/tipc/subscr.c:238 [inline] tipc_subscrb_release_cb+0x17/0x30 net/tipc/subscr.c:316 tipc_close_conn+0x171/0x270 net/tipc/server.c:204 tipc_topsrv_kern_subscr+0x724/0x810 net/tipc/server.c:514 tipc_group_create+0x702/0x9c0 net/tipc/group.c:184 tipc_sk_join net/tipc/socket.c:2747 [inline] tipc_setsockopt+0x249/0xc10 net/tipc/socket.c:2861 SYSC_setsockopt net/socket.c:1851 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1830 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 14c04493cb77 ("tipc: add ability to order and receive topology events in driver") Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
In tipc_topsrv_kern_subscr() when s->tipc_conn_new() fails
we call tipc_close_conn() to clean up, but in this case
calling conn_put() is just enough.

This fixes the folllowing crash:

 kasan: GPF could be caused by NULL-ptr deref or user memory access
 general protection fault: 0000 [#1] SMP KASAN
 Dumping ftrace buffer:
    (ftrace buffer empty)
 Modules linked in:
 CPU: 0 PID: 3085 Comm: syzkaller064164 Not tainted 4.15.0-rc1+ #137
 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
 task: 00000000c24413a5 task.stack: 000000005e8160b5
 RIP: 0010:__lock_acquire+0xd55/0x47f0 kernel/locking/lockdep.c:3378
 RSP: 0018:ffff8801cb5474a8 EFLAGS: 00010002
 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff85ecb400
 RBP: ffff8801cb547830 R08: 0000000000000001 R09: 0000000000000000
 R10: 0000000000000000 R11: ffffffff87489d60 R12: ffff8801cd2980c0
 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000020
 FS:  00000000014ee880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007ffee2426e40 CR3: 00000001cb85a000 CR4: 00000000001406f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:4004
  __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
  _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:175
  spin_lock_bh include/linux/spinlock.h:320 [inline]
  tipc_subscrb_subscrp_delete+0x8f/0x470 net/tipc/subscr.c:201
  tipc_subscrb_delete net/tipc/subscr.c:238 [inline]
  tipc_subscrb_release_cb+0x17/0x30 net/tipc/subscr.c:316
  tipc_close_conn+0x171/0x270 net/tipc/server.c:204
  tipc_topsrv_kern_subscr+0x724/0x810 net/tipc/server.c:514
  tipc_group_create+0x702/0x9c0 net/tipc/group.c:184
  tipc_sk_join net/tipc/socket.c:2747 [inline]
  tipc_setsockopt+0x249/0xc10 net/tipc/socket.c:2861
  SYSC_setsockopt net/socket.c:1851 [inline]
  SyS_setsockopt+0x189/0x360 net/socket.c:1830
  entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 14c04493cb77 ("tipc: add ability to order and receive topology events in driver")
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: switch to sock_recvmsg() 2017-12-03T01:38:10+00:00 Al Viro viro@zeniv.linux.org.uk 2017-09-21T02:08:04+00:00 bc4802736d8b17eddde52e00838c348770f67c19 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
tipc: checking for NULL instead of IS_ERR() 2017-10-20T07:34:00+00:00 Dan Carpenter dan.carpenter@oracle.com 2017-10-18T07:48:25+00:00 c75e427d9349ec3e0059752cc784e1c301474c2d The tipc_alloc_conn() function never returns NULL, it returns error pointers, so I have fixed the check. Fixes: 14c04493cb77 ("tipc: add ability to order and receive topology events in driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The tipc_alloc_conn() function never returns NULL, it returns error
pointers, so I have fixed the check.

Fixes: 14c04493cb77 ("tipc: add ability to order and receive topology events in driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: add ability to order and receive topology events in driver 2017-10-13T15:46:00+00:00 Jon Maloy jon.maloy@ericsson.com 2017-10-13T09:04:17+00:00 14c04493cb77bc38404dbcb39d5ccbb667831ad7 As preparation for introducing communication groups, we add the ability to issue topology subscriptions and receive topology events from kernel space. This will make it possible for group member sockets to keep track of other group members. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
As preparation for introducing communication groups, we add the ability
to issue topology subscriptions and receive topology events from kernel
space. This will make it possible for group member sockets to keep track
of other group members.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>