linux-stable.git/net/tipc/node.c, branch v4.18.2

tipc: fix wrong return value from function tipc_node_try_addr()

2018-07-07T10:49:01+00:00

The function for checking if there is an node address conflict is
supposed to return a suggestion for a new address if it finds a
conflict, and zero otherwise. But in case the peer being checked
is previously unknown it does instead return a "suggestion" for
the checked address itself. This results in a DSC_TRIAL_FAIL_MSG
being sent unecessarily to the peer, and sometimes makes the trial
period starting over again.

Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values")
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-05-12T00:53:22+00:00

The bpf syscall and selftests conflicts were trivial
overlapping changes.

The r8169 change involved moving the added mdelay from 'net' into a
different function.

A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts.  I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".

Signed-off-by: David S. Miller

tipc: eliminate KMSAN uninit-value in strcmp complaint

2018-05-10T12:25:13+00:00

When we get link properties through netlink interface with
tipc_nl_node_get_link(), we don't validate TIPC_NLA_LINK_NAME
attribute at all, instead we directly use it. As a consequence,
KMSAN detected the TIPC_NLA_LINK_NAME attribute was an uninitialized
value, and then posted the following complaint:

==================================================================
BUG: KMSAN: uninit-value in strcmp+0xf7/0x160 lib/string.c:329
CPU: 1 PID: 4527 Comm: syz-executor655 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x185/0x1d0 lib/dump_stack.c:53
  kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
  __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
  strcmp+0xf7/0x160 lib/string.c:329
  tipc_nl_node_get_link+0x220/0x6f0 net/tipc/node.c:1881
  genl_family_rcv_msg net/netlink/genetlink.c:599 [inline]
  genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624
  netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447
  genl_rcv+0x63/0x80 net/netlink/genetlink.c:635
  netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline]
  netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337
  netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg net/socket.c:640 [inline]
  ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
  __sys_sendmsg net/socket.c:2080 [inline]
  SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
  SyS_sendmsg+0x54/0x80 net/socket.c:2087
  do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x445589
RSP: 002b:00007fb7ee66cdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000006dac24 RCX: 0000000000445589
RDX: 0000000000000000 RSI: 0000000020023000 RDI: 0000000000000003
RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffa2bf3f3f R14: 00007fb7ee66d9c0 R15: 0000000000000001

Uninit was created at:
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
  kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
  kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
  kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
  slab_post_alloc_hook mm/slab.h:445 [inline]
  slab_alloc_node mm/slub.c:2737 [inline]
  __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
  __kmalloc_reserve net/core/skbuff.c:138 [inline]
  __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
  alloc_skb include/linux/skbuff.h:984 [inline]
  netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline]
  netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg net/socket.c:640 [inline]
  ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
  __sys_sendmsg net/socket.c:2080 [inline]
  SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
  SyS_sendmsg+0x54/0x80 net/socket.c:2087
  do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
==================================================================

To quiet the complaint, TIPC_NLA_LINK_NAME attribute has been
validated in tipc_nl_node_get_link() before it's used.

Reported-by: syzbot+df0257c92ffd4fcc58cd@syzkaller.appspotmail.com
Signed-off-by: Ying Xue 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-05-04T13:58:56+00:00

Overlapping changes in selftests Makefile.

Signed-off-by: David S. Miller

tipc: introduce ioctl for fetching node identity

2018-04-27T15:05:41+00:00

After the introduction of a 128-bit node identity it may be difficult
for a user to correlate between this identity and the generated node
hash address.

We now try to make this easier by introducing a new ioctl() call for
fetching a node identity by using the hash value as key. This will
be particularly useful when we extend some of the commands in the
'tipc' tool, but we also expect regular user applications to need
this feature.

Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: fix bug in function tipc_nl_node_dump_monitor

2018-04-27T15:03:56+00:00

Commit 36a50a989ee8 ("tipc: fix infinite loop when dumping link monitor
summary") intended to fix a problem with user tool looping when max
number of bearers are enabled.

Unfortunately, the wrong version of the commit was posted, so the
problem was not solved at all.

This commit adds the missing part.

Fixes: 36a50a989ee8 ("tipc: fix infinite loop when dumping link monitor summary")
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-04-21T20:32:48+00:00

Conflicts were simple overlapping changes in microchip
driver.

Signed-off-by: David S. Miller

tipc: confgiure and apply UDP bearer MTU on running links

2018-04-20T15:04:05+00:00

Currently, we have option to configure MTU of UDP media. The configured
MTU takes effect on the links going up after that moment. I.e, a user
has to reset bearer to have new value applied across its links. This is
confusing and disturbing on a running cluster.

We now introduce the functionality to change the default UDP bearer MTU
in struct tipc_bearer. Additionally, the links are updated dynamically,
without any need for a reset, when bearer value is changed. We leverage
the existing per-link functionality and the design being symetrical to
the confguration of link tolerance.

Acked-by: Jon Maloy 
Signed-off-by: GhantaKrishnamurthy MohanKrishna 
Signed-off-by: David S. Miller

tipc: fix infinite loop when dumping link monitor summary

2018-04-18T17:48:43+00:00

When configuring the number of used bearers to MAX_BEARER and issuing
command "tipc link monitor summary", the command enters infinite loop
in user space.

This issue happens because function tipc_nl_node_dump_monitor() returns
the wrong 'prev_bearer' value when all potential monitors have been
scanned.

The correct behavior is to always try to scan all monitors until either
the netlink message is full, in which case we return the bearer identity
of the affected monitor, or we continue through the whole bearer array
until we can return MAX_BEARERS. This solution also caters for the case
where there may be gaps in the bearer array.

Signed-off-by: Tung Nguyen 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: permit overlapping service ranges in name table

2018-04-01T02:19:52+00:00

With the new RB tree structure for service ranges it becomes possible to
solve an old problem; - we can now allow overlapping service ranges in
the table.

When inserting a new service range to the tree, we use 'lower' as primary
key, and when necessary 'upper' as secondary key.

Since there may now be multiple service ranges matching an indicated
'lower' value, we must also add the 'upper' value to the functions
used for removing publications, so that the correct, corresponding
range item can be found.

These changes guarantee that a well-formed publication/withdrawal item
from a peer node never will be rejected, and make it possible to
eliminate the problematic backlog functionality we currently have for
handling such cases.

Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller