linux-stable.git/net/sctp/socket.c, branch linux-5.6.y

sctp: fix refcount bug in sctp_wfree

2020-04-08T07:11:03+00:00

[ Upstream commit 5c3e82fe159622e46e91458c1a6509c321a62820 ]

We should iterate over the datamsgs to move
all chunks(skbs) to newsk.

The following case cause the bug:
for the trouble SKB, it was in outq->transmitted list

sctp_outq_sack
        sctp_check_transmitted
                SKB was moved to outq->sacked list
        then throw away the sack queue
                SKB was deleted from outq->sacked
(but it was held by datamsg at sctp_datamsg_to_asoc
So, sctp_wfree was not called here)

then migrate happened

        sctp_for_each_tx_datachunk(
        sctp_clear_owner_w);
        sctp_assoc_migrate();
        sctp_for_each_tx_datachunk(
        sctp_set_owner_w);
SKB was not in the outq, and was not changed to newsk

finally

__sctp_outq_teardown
        sctp_chunk_put (for another skb)
                sctp_datamsg_put
                        __kfree_skb(msg->frag_list)
                                sctp_wfree (for SKB)
	SKB->sk was still oldsk (skb->sk != asoc->base.sk).

Reported-and-tested-by: syzbot+cea71eec5d6de256d54d@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sctp: get netns from asoc and ep base

2019-12-10T04:14:01+00:00

Commit 312434617cb1 ("sctp: cache netns in sctp_ep_common") set netns
in asoc and ep base since they're created, and it will never change.
It's a better way to get netns from asoc and ep base, comparing to
calling sock_net().

This patch is to replace them.

v1->v2:
  - no change.

Suggested-by: Marcelo Ricardo Leitner 
Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller

net: port < inet_prot_sock(net) --> inet_port_requires_bind_service(net, port)

2019-11-26T21:20:46+00:00

Note that the sysctl write accessor functions guarantee that:
  net->ipv4.sysctl_ip_prot_sock <= net->ipv4.ip_local_ports.range[0]
invariant is maintained, and as such the max() in selinux hooks is actually spurious.

ie. even though
  if (snum < max(inet_prot_sock(sock_net(sk)), low) || snum > high) {
per logic is the same as
  if ((snum < inet_prot_sock(sock_net(sk)) && snum < low) || snum > high) {
it is actually functionally equivalent to:
  if (snum < low || snum > high) {
which is equivalent to:
  if (snum < inet_prot_sock(sock_net(sk)) || snum < low || snum > high) {
even though the first clause is spurious.

But we want to hold on to it in case we ever want to change what what
inet_port_requires_bind_service() means (for example by changing
it from a, by default, [0..1024) range to some sort of set).

Test: builds, git 'grep inet_prot_sock' finds no other references
Cc: Eric Dumazet 
Signed-off-by: Maciej Żenczykowski 
Signed-off-by: David S. Miller

net-sctp: replace some sock_net(sk) with just 'net'

2019-11-26T21:18:32+00:00

It already existed in part of the function, but move it
to a higher level and use it consistently throughout.

Safe since sk is never written to.

Signed-off-by: Maciej Żenczykowski 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller

sctp: add SCTP_PEER_ADDR_THLDS_V2 sockopt

2019-11-08T22:18:32+00:00

Section 7.2 of rfc7829: "Peer Address Thresholds (SCTP_PEER_ADDR_THLDS)
Socket Option" extends 'struct sctp_paddrthlds' with 'spt_pathcpthld'
added to allow a user to change ps_retrans per sock/asoc/transport, as
other 2 paddrthlds: pf_retrans, pathmaxrxt.

Note: to not break the user's program, here to support pf_retrans dump
and setting by adding a new sockopt SCTP_PEER_ADDR_THLDS_V2, and a new
structure sctp_paddrthlds_v2 instead of extending sctp_paddrthlds.

Also, when setting ps_retrans, the value is not allowed to be greater
than pf_retrans.

v1->v2:
  - use SCTP_PEER_ADDR_THLDS_V2 to set/get pf_retrans instead,
    as Marcelo and David Laight suggested.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: add support for Primary Path Switchover

2019-11-08T22:18:32+00:00

This is a new feature defined in section 5 of rfc7829: "Primary Path
Switchover". By introducing a new tunable parameter:

  Primary.Switchover.Max.Retrans (PSMR)

The primary path will be changed to another active path when the path
error counter on the old primary path exceeds PSMR, so that "the SCTP
sender is allowed to continue data transmission on a new working path
even when the old primary destination address becomes active again".

This patch is to add this tunable parameter, 'ps_retrans' per netns,
sock, asoc and transport. It also allows a user to change ps_retrans
per netns by sysctl, and ps_retrans per sock/asoc/transport will be
initialized with it.

The check will be done in sctp_do_8_2_transport_strike() when this
feature is enabled.

Note this feature is disabled by initializing 'ps_retrans' per netns
as 0xffff by default, and its value can't be less than 'pf_retrans'
when changing by sysctl.

v3->v4:
  - add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of
    sysctl 'ps_retrans'.
  - add a new entry for ps_retrans on ip-sysctl.txt.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: add SCTP_EXPOSE_POTENTIALLY_FAILED_STATE sockopt

2019-11-08T22:18:32+00:00

This is a sockopt defined in section 7.3 of rfc7829: "Exposing
the Potentially Failed Path State", by which users can change
pf_expose per sock and asoc.

The new sockopt SCTP_EXPOSE_POTENTIALLY_FAILED_STATE is also
known as SCTP_EXPOSE_PF_STATE for short.

v2->v3:
  - return -EINVAL if params.assoc_value > SCTP_PF_EXPOSE_MAX.
  - define SCTP_EXPOSE_PF_STATE SCTP_EXPOSE_POTENTIALLY_FAILED_STATE.
v3->v4:
  - improve changelog.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: add pf_expose per netns and sock and asoc

2019-11-08T22:18:32+00:00

As said in rfc7829, section 3, point 12:

  The SCTP stack SHOULD expose the PF state of its destination
  addresses to the ULP as well as provide the means to notify the
  ULP of state transitions of its destination addresses from
  active to PF, and vice versa.  However, it is recommended that
  an SCTP stack implementing SCTP-PF also allows for the ULP to be
  kept ignorant of the PF state of its destinations and the
  associated state transitions, thus allowing for retention of the
  simpler state transition model of [RFC4960] in the ULP.

Not only does it allow to expose the PF state to ULP, but also
allow to ignore sctp-pf to ULP.

So this patch is to add pf_expose per netns, sock and asoc. And in
sctp_assoc_control_transport(), ulp_notify will be set to false if
asoc->expose is not 'enabled' in next patch.

It also allows a user to change pf_expose per netns by sysctl, and
pf_expose per sock and asoc will be initialized with it.

Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt,
to not allow a user to query the state of a sctp-pf peer address
when pf_expose is 'disabled', as said in section 7.3.

v1->v2:
  - Fix a build warning noticed by Nathan Chancellor.
v2->v3:
  - set pf_expose to UNUSED by default to keep compatible with old
    applications.
v3->v4:
  - add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested.
  - change this patch to 1/5, and move sctp_assoc_control_transport
    change into 2/5, as Marcelo suggested.
  - use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and
    set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

net: annotate lockless accesses to sk->sk_max_ack_backlog

2019-11-07T00:14:48+00:00

sk->sk_max_ack_backlog can be read without any lock being held
at least in TCP/DCCP cases.

We need to use READ_ONCE()/WRITE_ONCE() to avoid load/store tearing
and/or potential KCSAN warnings.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

inet: stop leaking jiffies on the wire

2019-11-01T21:57:52+00:00

Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.

RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.

Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.

Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.

Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet 
Reported-by: Thiemo Nagel 
Signed-off-by: David S. Miller