linux-stable.git/net/sched, branch v5.2

net/sched: cbs: Fix error path of cbs_module_init

2019-06-23T18:32:48+00:00

If register_qdisc fails, we should unregister
netdevice notifier.

Reported-by: Hulk Robot 
Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation")
Signed-off-by: YueHaibing 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-22T05:23:35+00:00

Pull networking fixes from David Miller:

 1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
    Nault.

 2) Don't access the DDM interface unless the transceiver implements it
    in bnx2x, from Mauro S. M. Rodrigues.

 3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
    JingYi Hou.

 4) Sign extension overflow in lio_core, from Colin Ian King.

 5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.

 6) Fix epollout hang in hvsock, from Sunil Muthuswamy.

 7) Fix regression in default fib6_type, from David Ahern.

 8) Handle memory limits in tcp_fragment more appropriately, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
  tcp: refine memory limit test in tcp_fragment()
  inet: clear num_timeout reqsk_alloc()
  net: mvpp2: debugfs: Add pmap to fs dump
  ipv6: Default fib6_type to RTN_UNICAST when not set
  net: hns3: Fix inconsistent indenting
  net/af_iucv: always register net_device notifier
  net/af_iucv: build proper skbs for HiperTransport
  net/af_iucv: remove GFP_DMA restriction for HiperTransport
  net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
  hvsock: fix epollout hang from race condition
  net/udp_gso: Allow TX timestamp with UDP GSO
  net: netem: fix use after free and double free with packet corruption
  net: netem: fix backlog accounting for corrupted GSO frames
  net: lio_core: fix potential sign-extension overflow on large shift
  tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
  ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
  ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
  tun: wake up waitqueues after IFF_UP is set
  net: remove duplicate fetch in sock_getsockopt
  tipc: fix issues with early FAILOVER_MSG from peer
  ...

Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2019-06-21T16:58:42+00:00

Pull still more SPDX updates from Greg KH:
 "Another round of SPDX updates for 5.2-rc6

  Here is what I am guessing is going to be the last "big" SPDX update
  for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
  that were "easy" to determine by pattern matching. The ones after this
  are going to be a bit more difficult and the people on the spdx list
  will be discussing them on a case-by-case basis now.

  Another 5000+ files are fixed up, so our overall totals are:
	Files checked:            64545
	Files with SPDX:          45529

  Compared to the 5.1 kernel which was:
	Files checked:            63848
	Files with SPDX:          22576

  This is a huge improvement.

  Also, we deleted another 20000 lines of boilerplate license crud,
  always nice to see in a diffstat"

* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
  ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235

2019-06-19T15:09:07+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 53 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Alexios Zavras 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de
Signed-off-by: Greg Kroah-Hartman

net: netem: fix use after free and double free with packet corruption

2019-06-19T01:30:38+00:00

Brendan reports that the use of netem's packet corruption capability
leads to strange crashes.  This seems to be caused by
commit d66280b12bd7 ("net: netem: use a list in addition to rbtree")
which uses skb->next pointer to construct a fast-path queue of
in-order skbs.

Packet corruption code has to invoke skb_gso_segment() in case
of skbs in need of GSO.  skb_gso_segment() returns a list of
skbs.  If next pointers of the skbs on that list do not get cleared
fast path list may point to freed skbs or skbs which are also on
the RB tree.

Let's say skb gets segmented into 3 frames:

A -> B -> C

A gets hooked to the t_head t_tail list by tfifo_enqueue(), but it's
next pointer didn't get cleared so we have:

h t
|/
A -> B -> C

Now if B and C get also get enqueued successfully all is fine, because
tfifo_enqueue() will overwrite the list in order.  IOW:

Enqueue B:

h    t
|    |
A -> B    C

Enqueue C:

h         t
|         |
A -> B -> C

But if B and C get reordered we may end up with:

h t            RB tree
|/                |
A -> B -> C       B
                   \
                    C

Or if they get dropped just:

h t
|/
A -> B -> C

where A and B are already freed.

To reproduce either limit has to be set low to cause freeing of
segs or reorders have to happen (due to delay jitter).

Note that we only have to mark the first segment as not on the
list, "finish_segs" handling of other frags already does that.

Another caveat is that qdisc_drop_all() still has to free all
segments correctly in case of drop of first segment, therefore
we re-link segs before calling it.

v2:
 - re-link before drop, v1 was leaking non-first segs if limit
   was hit at the first seg
 - better commit message which lead to discovering the above :)

Reported-by: Brendan Galloway 
Fixes: d66280b12bd7 ("net: netem: use a list in addition to rbtree")
Signed-off-by: Jakub Kicinski 
Reviewed-by: Dirk van der Merwe 
Acked-by: Cong Wang 
Signed-off-by: David S. Miller

net: netem: fix backlog accounting for corrupted GSO frames

2019-06-19T01:30:38+00:00

When GSO frame has to be corrupted netem uses skb_gso_segment()
to produce the list of frames, and re-enqueues the segments one
by one.  The backlog length has to be adjusted to account for
new frames.

The current calculation is incorrect, leading to wrong backlog
lengths in the parent qdisc (both bytes and packets), and
incorrect packet backlog count in netem itself.

Parent backlog goes negative, netem's packet backlog counts
all non-first segments twice (thus remaining non-zero even
after qdisc is emptied).

Move the variables used to count the adjustment into local
scope to make 100% sure they aren't used at any stage in
backports.

Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
Signed-off-by: Jakub Kicinski 
Reviewed-by: Dirk van der Merwe 
Acked-by: Cong Wang 
Signed-off-by: David S. Miller

net: sched: flower: don't call synchronize_rcu() on mask creation

2019-06-15T02:29:57+00:00

Current flower mask creating code assumes that temporary mask that is used
when inserting new filter is stack allocated. To prevent race condition
with data patch synchronize_rcu() is called every time fl_create_new_mask()
replaces temporary stack allocated mask. As reported by Jiri, this
increases runtime of creating 20000 flower classifiers from 4 seconds to
163 seconds. However, this design is no longer necessary since temporary
mask was converted to be dynamically allocated by commit 2cddd2014782
("net/sched: cls_flower: allocate mask dynamically in fl_change()").

Remove synchronize_rcu() calls from mask creation code. Instead, refactor
fl_change() to always deallocate temporary mask with rcu grace period.

Fixes: 195c234d15c9 ("net: sched: flower: handle concurrent mask insertion")
Reported-by: Jiri Pirko 
Signed-off-by: Vlad Buslov 
Tested-by: Jiri Pirko 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller

Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-05-31T15:34:32+00:00

Pull yet more SPDX updates from Greg KH:
 "Here is another set of reviewed patches that adds SPDX tags to
  different kernel files, based on a set of rules that are being used to
  parse the comments to try to determine that the license of the file is
  "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
  these matches are included here, a number of "non-obvious" variants of
  text have been found but those have been postponed for later review
  and analysis.

  There is also a patch in here to add the proper SPDX header to a bunch
  of Kbuild files that we have missed in the past due to new files being
  added and forgetting that Kbuild uses two different file names for
  Makefiles. This issue was reported by the Kbuild maintainer.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers"

* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
  treewide: Add SPDX license identifier - Kbuild
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
  ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

2019-05-30T18:29:52+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 228 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Steve Winslow 
Reviewed-by: Richard Fontana 
Reviewed-by: Alexios Zavras 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
Signed-off-by: Greg Kroah-Hartman