linux-stable.git/net/sched, branch linux-6.2.y

net/sched: act_mirred: Add carrier check

2023-05-17T11:58:46+00:00

[ Upstream commit 526f28bd0fbdc699cda31426928802650c1528e5 ]

There are cases where the device is adminstratively UP, but operationally
down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
who's cable was pulled out, here is its ip link output:

5: ens2f1:  mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
    altname enp179s0f1np1

As you can see, it's administratively UP but operationally down.
In this case, sending a packet to this port caused a nasty kernel hang (so
nasty that we were unable to capture it). Aborting a transmit based on
operational status (in addition to administrative status) fixes the issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Acked-by: Jamal Hadi Salim 
Signed-off-by: Victor Nogueira 
v1->v2: Add fixes tag
v2->v3: Remove blank line between tags + add change log, suggested by Leon
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net/sched: cls_api: remove block_cb from driver_list before freeing

2023-05-17T11:58:44+00:00

[ Upstream commit da94a7781fc3c92e7df7832bc2746f4d39bc624e ]

Error handler of tcf_block_bind() frees the whole bo->cb_list on error.
However, by that time the flow_block_cb instances are already in the driver
list because driver ndo_setup_tc() callback is called before that up the
call chain in tcf_block_offload_cmd(). This leaves dangling pointers to
freed objects in the list and causes use-after-free[0]. Fix it by also
removing flow_block_cb instances from driver_list before deallocating them.

[0]:
[  279.868433] ==================================================================
[  279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0
[  279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963

[  279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4
[  279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  279.876295] Call Trace:
[  279.876882]  
[  279.877413]  dump_stack_lvl+0x33/0x50
[  279.878198]  print_report+0xc2/0x610
[  279.878987]  ? flow_block_cb_setup_simple+0x631/0x7c0
[  279.879994]  kasan_report+0xae/0xe0
[  279.880750]  ? flow_block_cb_setup_simple+0x631/0x7c0
[  279.881744]  ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core]
[  279.883047]  flow_block_cb_setup_simple+0x631/0x7c0
[  279.884027]  tcf_block_offload_cmd.isra.0+0x189/0x2d0
[  279.885037]  ? tcf_block_setup+0x6b0/0x6b0
[  279.885901]  ? mutex_lock+0x7d/0xd0
[  279.886669]  ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0
[  279.887844]  ? ingress_init+0x1c0/0x1c0 [sch_ingress]
[  279.888846]  tcf_block_get_ext+0x61c/0x1200
[  279.889711]  ingress_init+0x112/0x1c0 [sch_ingress]
[  279.890682]  ? clsact_init+0x2b0/0x2b0 [sch_ingress]
[  279.891701]  qdisc_create+0x401/0xea0
[  279.892485]  ? qdisc_tree_reduce_backlog+0x470/0x470
[  279.893473]  tc_modify_qdisc+0x6f7/0x16d0
[  279.894344]  ? tc_get_qdisc+0xac0/0xac0
[  279.895213]  ? mutex_lock+0x7d/0xd0
[  279.896005]  ? __mutex_lock_slowpath+0x10/0x10
[  279.896910]  rtnetlink_rcv_msg+0x5fe/0x9d0
[  279.897770]  ? rtnl_calcit.isra.0+0x2b0/0x2b0
[  279.898672]  ? __sys_sendmsg+0xb5/0x140
[  279.899494]  ? do_syscall_64+0x3d/0x90
[  279.900302]  ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  279.901337]  ? kasan_save_stack+0x2e/0x40
[  279.902177]  ? kasan_save_stack+0x1e/0x40
[  279.903058]  ? kasan_set_track+0x21/0x30
[  279.903913]  ? kasan_save_free_info+0x2a/0x40
[  279.904836]  ? ____kasan_slab_free+0x11a/0x1b0
[  279.905741]  ? kmem_cache_free+0x179/0x400
[  279.906599]  netlink_rcv_skb+0x12c/0x360
[  279.907450]  ? rtnl_calcit.isra.0+0x2b0/0x2b0
[  279.908360]  ? netlink_ack+0x1550/0x1550
[  279.909192]  ? rhashtable_walk_peek+0x170/0x170
[  279.910135]  ? kmem_cache_alloc_node+0x1af/0x390
[  279.911086]  ? _copy_from_iter+0x3d6/0xc70
[  279.912031]  netlink_unicast+0x553/0x790
[  279.912864]  ? netlink_attachskb+0x6a0/0x6a0
[  279.913763]  ? netlink_recvmsg+0x416/0xb50
[  279.914627]  netlink_sendmsg+0x7a1/0xcb0
[  279.915473]  ? netlink_unicast+0x790/0x790
[  279.916334]  ? iovec_from_user.part.0+0x4d/0x220
[  279.917293]  ? netlink_unicast+0x790/0x790
[  279.918159]  sock_sendmsg+0xc5/0x190
[  279.918938]  ____sys_sendmsg+0x535/0x6b0
[  279.919813]  ? import_iovec+0x7/0x10
[  279.920601]  ? kernel_sendmsg+0x30/0x30
[  279.921423]  ? __copy_msghdr+0x3c0/0x3c0
[  279.922254]  ? import_iovec+0x7/0x10
[  279.923041]  ___sys_sendmsg+0xeb/0x170
[  279.923854]  ? copy_msghdr_from_user+0x110/0x110
[  279.924797]  ? ___sys_recvmsg+0xd9/0x130
[  279.925630]  ? __perf_event_task_sched_in+0x183/0x470
[  279.926656]  ? ___sys_sendmsg+0x170/0x170
[  279.927529]  ? ctx_sched_in+0x530/0x530
[  279.928369]  ? update_curr+0x283/0x4f0
[  279.929185]  ? perf_event_update_userpage+0x570/0x570
[  279.930201]  ? __fget_light+0x57/0x520
[  279.931023]  ? __switch_to+0x53d/0xe70
[  279.931846]  ? sockfd_lookup_light+0x1a/0x140
[  279.932761]  __sys_sendmsg+0xb5/0x140
[  279.933560]  ? __sys_sendmsg_sock+0x20/0x20
[  279.934436]  ? fpregs_assert_state_consistent+0x1d/0xa0
[  279.935490]  do_syscall_64+0x3d/0x90
[  279.936300]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  279.937311] RIP: 0033:0x7f21c814f887
[  279.938085] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  279.941448] RSP: 002b:00007fff11efd478 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  279.942964] RAX: ffffffffffffffda RBX: 0000000064401979 RCX: 00007f21c814f887
[  279.944337] RDX: 0000000000000000 RSI: 00007fff11efd4e0 RDI: 0000000000000003
[  279.945660] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[  279.947003] R10: 00007f21c8008708 R11: 0000000000000246 R12: 0000000000000001
[  279.948345] R13: 0000000000409980 R14: 000000000047e538 R15: 0000000000485400
[  279.949690]  

[  279.950706] Allocated by task 2960:
[  279.951471]  kasan_save_stack+0x1e/0x40
[  279.952338]  kasan_set_track+0x21/0x30
[  279.953165]  __kasan_kmalloc+0x77/0x90
[  279.954006]  flow_block_cb_setup_simple+0x3dd/0x7c0
[  279.955001]  tcf_block_offload_cmd.isra.0+0x189/0x2d0
[  279.956020]  tcf_block_get_ext+0x61c/0x1200
[  279.956881]  ingress_init+0x112/0x1c0 [sch_ingress]
[  279.957873]  qdisc_create+0x401/0xea0
[  279.958656]  tc_modify_qdisc+0x6f7/0x16d0
[  279.959506]  rtnetlink_rcv_msg+0x5fe/0x9d0
[  279.960392]  netlink_rcv_skb+0x12c/0x360
[  279.961216]  netlink_unicast+0x553/0x790
[  279.962044]  netlink_sendmsg+0x7a1/0xcb0
[  279.962906]  sock_sendmsg+0xc5/0x190
[  279.963702]  ____sys_sendmsg+0x535/0x6b0
[  279.964534]  ___sys_sendmsg+0xeb/0x170
[  279.965343]  __sys_sendmsg+0xb5/0x140
[  279.966132]  do_syscall_64+0x3d/0x90
[  279.966908]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[  279.968407] Freed by task 2960:
[  279.969114]  kasan_save_stack+0x1e/0x40
[  279.969929]  kasan_set_track+0x21/0x30
[  279.970729]  kasan_save_free_info+0x2a/0x40
[  279.971603]  ____kasan_slab_free+0x11a/0x1b0
[  279.972483]  __kmem_cache_free+0x14d/0x280
[  279.973337]  tcf_block_setup+0x29d/0x6b0
[  279.974173]  tcf_block_offload_cmd.isra.0+0x226/0x2d0
[  279.975186]  tcf_block_get_ext+0x61c/0x1200
[  279.976080]  ingress_init+0x112/0x1c0 [sch_ingress]
[  279.977065]  qdisc_create+0x401/0xea0
[  279.977857]  tc_modify_qdisc+0x6f7/0x16d0
[  279.978695]  rtnetlink_rcv_msg+0x5fe/0x9d0
[  279.979562]  netlink_rcv_skb+0x12c/0x360
[  279.980388]  netlink_unicast+0x553/0x790
[  279.981214]  netlink_sendmsg+0x7a1/0xcb0
[  279.982043]  sock_sendmsg+0xc5/0x190
[  279.982827]  ____sys_sendmsg+0x535/0x6b0
[  279.983703]  ___sys_sendmsg+0xeb/0x170
[  279.984510]  __sys_sendmsg+0xb5/0x140
[  279.985298]  do_syscall_64+0x3d/0x90
[  279.986076]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[  279.987532] The buggy address belongs to the object at ffff888147e2bf00
                which belongs to the cache kmalloc-192 of size 192
[  279.989747] The buggy address is located 32 bytes inside of
                freed 192-byte region [ffff888147e2bf00, ffff888147e2bfc0)

[  279.992367] The buggy address belongs to the physical page:
[  279.993430] page:00000000550f405c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147e2a
[  279.995182] head:00000000550f405c order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[  279.996713] anon flags: 0x200000000010200(slab|head|node=0|zone=2)
[  279.997878] raw: 0200000000010200 ffff888100042a00 0000000000000000 dead000000000001
[  279.999384] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[  280.000894] page dumped because: kasan: bad access detected

[  280.002386] Memory state around the buggy address:
[  280.003338]  ffff888147e2be00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  280.004781]  ffff888147e2be80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[  280.006224] >ffff888147e2bf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  280.007700]                                ^
[  280.008592]  ffff888147e2bf80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[  280.010035]  ffff888147e2c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  280.011564] ==================================================================

Fixes: 59094b1e5094 ("net: sched: use flow block API")
Signed-off-by: Vlad Buslov 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net/sched: sch_fq: fix integer overflow of "credit"

2023-05-11T14:11:19+00:00

[ Upstream commit 7041101ff6c3073fd8f2e99920f535b111c929cb ]

if sch_fq is configured with "initial quantum" having values greater than
INT_MAX, the first assignment of "credit" does signed integer overflow to
a very negative value.
In this situation, the syzkaller script provided by Cristoph triggers the
CPU soft-lockup warning even with few sockets. It's not an infinite loop,
but "credit" wasn't probably meant to be minus 2Gb for each new flow.
Capping "initial quantum" to INT_MAX proved to fix the issue.

v2: validation of "initial quantum" is done in fq_policy, instead of open
    coding in fq_change() _ suggested by Jakub Kicinski

Reported-by: Christoph Paasch 
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/377
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Reviewed-by: Eric Dumazet 
Signed-off-by: Davide Caratti 
Link: https://lore.kernel.org/r/7b3a3c7e36d03068707a021760a194a8eb5ad41a.1682002300.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg

2023-04-26T12:29:56+00:00

[ Upstream commit 3037933448f60f9acb705997eae62013ecb81e0d ]

If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device.
The MTU of the loopback device can be set up to 2^31-1.
As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX.

Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors.

The following reports a oob access:

[   84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[   84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301
[   84.583686]
[   84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1
[   84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[   84.584644] Call Trace:
[   84.584787]  
[   84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
[   84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
[   84.585570] kasan_report (mm/kasan/report.c:538)
[   84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[   84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255)
[   84.587607] dev_qdisc_enqueue (net/core/dev.c:3776)
[   84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212)
[   84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228)
[   84.589460] ip_output (net/ipv4/ip_output.c:430)
[   84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606)
[   84.590285] raw_sendmsg (net/ipv4/raw.c:649)
[   84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[   84.592084] __sys_sendto (net/socket.c:2142)
[   84.593306] __x64_sys_sendto (net/socket.c:2150)
[   84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[   84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[   84.594070] RIP: 0033:0x7fe568032066
[   84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c

Code starting with the faulting instruction
===========================================
[   84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066
[   84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003
[   84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010
[   84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[   84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001
[   84.596218]  
[   84.596295]
[   84.596351] Allocated by task 291:
[   84.596467] kasan_save_stack (mm/kasan/common.c:46)
[   84.596597] kasan_set_track (mm/kasan/common.c:52)
[   84.596725] __kasan_kmalloc (mm/kasan/common.c:384)
[   84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974)
[   84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938)
[   84.597100] qdisc_create (net/sched/sch_api.c:1244)
[   84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680)
[   84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
[   84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574)
[   84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365)
[   84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942)
[   84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[   84.598016] ____sys_sendmsg (net/socket.c:2501)
[   84.598147] ___sys_sendmsg (net/socket.c:2557)
[   84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586)
[   84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[   84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[   84.598688]
[   84.598744] The buggy address belongs to the object at ffff88810f674000
[   84.598744]  which belongs to the cache kmalloc-8k of size 8192
[   84.599135] The buggy address is located 2664 bytes to the right of
[   84.599135]  allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0)
[   84.599544]
[   84.599598] The buggy address belongs to the physical page:
[   84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670
[   84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[   84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2)
[   84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000
[   84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
[   84.601009] page dumped because: kasan: bad access detected
[   84.601187]
[   84.601241] Memory state around the buggy address:
[   84.601396]  ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.601620]  ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.602069]                                               ^
[   84.602243]  ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.602468]  ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.602693] ==================================================================
[   84.602924] Disabling lock debugging due to kernel taint

Fixes: 3015f3d2a3cd ("pkt_sched: enable QFQ to support TSO/GSO")
Reported-by: Gwangun Jung 
Signed-off-by: Gwangun Jung 
Acked-by: Jamal Hadi Salim
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

act_mirred: use the backlog for nested calls to mirred ingress

2023-03-30T10:51:31+00:00

[ Upstream commit ca22da2fbd693b54dc8e3b7b54ccc9f7e9ba3640 ]

William reports kernel soft-lockups on some OVS topologies when TC mirred
egress->ingress action is hit by local TCP traffic [1].
The same can also be reproduced with SCTP (thanks Xin for verifying), when
client and server reach themselves through mirred egress to ingress, and
one of the two peers sends a "heartbeat" packet (from within a timer).

Enqueueing to backlog proved to fix this soft lockup; however, as Cong
noticed [2], we should preserve - when possible - the current mirred
behavior that counts as "overlimits" any eventual packet drop subsequent to
the mirred forwarding action [3]. A compromise solution might use the
backlog only when tcf_mirred_act() has a nest level greater than one:
change tcf_mirred_forward() accordingly.

Also, add a kselftest that can reproduce the lockup and verifies TC mirred
ability to account for further packet drops after TC mirred egress->ingress
(when the nest level is 1).

 [1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
 [2] https://lore.kernel.org/netdev/Y0w%2FWWY60gqrtGLp@pop-os.localdomain/
 [3] such behavior is not guaranteed: for example, if RPS or skb RX
     timestamping is enabled on the mirred target device, the kernel
     can defer receiving the skb and return NET_RX_SUCCESS inside
     tcf_mirred_forward().

Reported-by: William Zhao 
CC: Xin Long 
Signed-off-by: Davide Caratti 
Reviewed-by: Marcelo Ricardo Leitner 
Acked-by: Jamal Hadi Salim 
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net/sched: act_mirred: better wording on protection against excessive stack growth

2023-03-30T10:51:31+00:00

[ Upstream commit 78dcdffe0418ac8f3f057f26fe71ccf4d8ed851f ]

with commit e2ca070f89ec ("net: sched: protect against stack overflow in
TC act_mirred"), act_mirred protected itself against excessive stack growth
using per_cpu counter of nested calls to tcf_mirred_act(), and capping it
to MIRRED_RECURSION_LIMIT. However, such protection does not detect
recursion/loops in case the packet is enqueued to the backlog (for example,
when the mirred target device has RPS or skb timestamping enabled). Change
the wording from "recursion" to "nesting" to make it more clear to readers.

CC: Jamal Hadi Salim 
Signed-off-by: Davide Caratti 
Reviewed-by: Marcelo Ricardo Leitner 
Acked-by: Jamal Hadi Salim 
Signed-off-by: Paolo Abeni 
Stable-dep-of: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress")
Signed-off-by: Sasha Levin

net/sched: act_sample: fix action bind logic

2023-03-11T12:50:33+00:00

[ Upstream commit 4a20056a49a1854966562241922f68197f950539 ]

The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action sample ... index 1
tc filter add ... action pedit index 1

In the current code for act_sample this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.

tdc results:
1..29
ok 1 9784 - Add valid sample action with mandatory arguments
ok 2 5c91 - Add valid sample action with mandatory arguments and continue control action
ok 3 334b - Add valid sample action with mandatory arguments and drop control action
ok 4 da69 - Add valid sample action with mandatory arguments and reclassify control action
ok 5 13ce - Add valid sample action with mandatory arguments and pipe control action
ok 6 1886 - Add valid sample action with mandatory arguments and jump control action
ok 7 7571 - Add sample action with invalid rate
ok 8 b6d4 - Add sample action with mandatory arguments and invalid control action
ok 9 a874 - Add invalid sample action without mandatory arguments
ok 10 ac01 - Add invalid sample action without mandatory argument rate
ok 11 4203 - Add invalid sample action without mandatory argument group
ok 12 14a7 - Add invalid sample action without mandatory argument group
ok 13 8f2e - Add valid sample action with trunc argument
ok 14 45f8 - Add sample action with maximum rate argument
ok 15 ad0c - Add sample action with maximum trunc argument
ok 16 83a9 - Add sample action with maximum group argument
ok 17 ed27 - Add sample action with invalid rate argument
ok 18 2eae - Add sample action with invalid group argument
ok 19 6ff3 - Add sample action with invalid trunc size
ok 20 2b2a - Add sample action with invalid index
ok 21 dee2 - Add sample action with maximum allowed index
ok 22 560e - Add sample action with cookie
ok 23 704a - Replace existing sample action with new rate argument
ok 24 60eb - Replace existing sample action with new group argument
ok 25 2cce - Replace existing sample action with new trunc argument
ok 26 59d1 - Replace existing sample action with new control argument
ok 27 0a6e - Replace sample action with invalid goto chain control
ok 28 3872 - Delete sample action with valid index
ok 29 a394 - Delete sample action with invalid index

Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Reviewed-by: Jamal Hadi Salim 
Signed-off-by: Pedro Tammela 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net/sched: act_mpls: fix action bind logic

2023-03-11T12:50:33+00:00

[ Upstream commit e88d78a773cb5242e933930c8855bf4b2e8c2397 ]

The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action mpls ... index 1
tc filter add ... action mpls index 1

In the current code for act_mpls this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.

tdc results:
1..53
ok 1 a933 - Add MPLS dec_ttl action with pipe opcode
ok 2 08d1 - Add mpls dec_ttl action with pass opcode
ok 3 d786 - Add mpls dec_ttl action with drop opcode
ok 4 f334 - Add mpls dec_ttl action with reclassify opcode
ok 5 29bd - Add mpls dec_ttl action with continue opcode
ok 6 48df - Add mpls dec_ttl action with jump opcode
ok 7 62eb - Add mpls dec_ttl action with trap opcode
ok 8 09d2 - Add mpls dec_ttl action with opcode and cookie
ok 9 c170 - Add mpls dec_ttl action with opcode and cookie of max length
ok 10 9118 - Add mpls dec_ttl action with invalid opcode
ok 11 6ce1 - Add mpls dec_ttl action with label (invalid)
ok 12 352f - Add mpls dec_ttl action with tc (invalid)
ok 13 fa1c - Add mpls dec_ttl action with ttl (invalid)
ok 14 6b79 - Add mpls dec_ttl action with bos (invalid)
ok 15 d4c4 - Add mpls pop action with ip proto
ok 16 91fb - Add mpls pop action with ip proto and cookie
ok 17 92fe - Add mpls pop action with mpls proto
ok 18 7e23 - Add mpls pop action with no protocol (invalid)
ok 19 6182 - Add mpls pop action with label (invalid)
ok 20 6475 - Add mpls pop action with tc (invalid)
ok 21 067b - Add mpls pop action with ttl (invalid)
ok 22 7316 - Add mpls pop action with bos (invalid)
ok 23 38cc - Add mpls push action with label
ok 24 c281 - Add mpls push action with mpls_mc protocol
ok 25 5db4 - Add mpls push action with label, tc and ttl
ok 26 7c34 - Add mpls push action with label, tc ttl and cookie of max length
ok 27 16eb - Add mpls push action with label and bos
ok 28 d69d - Add mpls push action with no label (invalid)
ok 29 e8e4 - Add mpls push action with ipv4 protocol (invalid)
ok 30 ecd0 - Add mpls push action with out of range label (invalid)
ok 31 d303 - Add mpls push action with out of range tc (invalid)
ok 32 fd6e - Add mpls push action with ttl of 0 (invalid)
ok 33 19e9 - Add mpls mod action with mpls label
ok 34 1fde - Add mpls mod action with max mpls label
ok 35 0c50 - Add mpls mod action with mpls label exceeding max (invalid)
ok 36 10b6 - Add mpls mod action with mpls label of MPLS_LABEL_IMPLNULL (invalid)
ok 37 57c9 - Add mpls mod action with mpls min tc
ok 38 6872 - Add mpls mod action with mpls max tc
ok 39 a70a - Add mpls mod action with mpls tc exceeding max (invalid)
ok 40 6ed5 - Add mpls mod action with mpls ttl
ok 41 77c1 - Add mpls mod action with mpls ttl and cookie
ok 42 b80f - Add mpls mod action with mpls max ttl
ok 43 8864 - Add mpls mod action with mpls min ttl
ok 44 6c06 - Add mpls mod action with mpls ttl of 0 (invalid)
ok 45 b5d8 - Add mpls mod action with mpls ttl exceeding max (invalid)
ok 46 451f - Add mpls mod action with mpls max bos
ok 47 a1ed - Add mpls mod action with mpls min bos
ok 48 3dcf - Add mpls mod action with mpls bos exceeding max (invalid)
ok 49 db7c - Add mpls mod action with protocol (invalid)
ok 50 b070 - Replace existing mpls push action with new ID
ok 51 95a9 - Replace existing mpls push action with new label, tc, ttl and cookie
ok 52 6cce - Delete mpls pop action
ok 53 d138 - Flush mpls actions

Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: Jamal Hadi Salim 
Signed-off-by: Pedro Tammela 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net/sched: act_pedit: fix action bind logic

2023-03-11T12:50:33+00:00

[ Upstream commit e9e42292ea76a8358b0c02ffd530d78e133a1b73 ]

The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action pedit ... index 1
tc filter add ... action pedit index 1

In the current code for act_pedit this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.

tdc results:
1..69
ok 1 319a - Add pedit action that mangles IP TTL
ok 2 7e67 - Replace pedit action with invalid goto chain
ok 3 377e - Add pedit action with RAW_OP offset u32
ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID)
ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16
ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID)
ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value
ok 8 2893 - Add pedit action with RAW_OP offset u8 quad
ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8
ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8
ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert
ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID)
ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set
ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value
ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value
ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value
ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value
ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value
ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value
ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value
ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value
ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value
ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value
ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value
ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src
ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst
ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst
ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID)
ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID)
ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence
ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID)
ok 32 ab06 - Add pedit action with LAYERED_OP eth add type
ok 33 918d - Add pedit action with LAYERED_OP eth invert src
ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst
ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type
ok 36 7588 - Add pedit action with LAYERED_OP ip set src
ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst
ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst
ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield
ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol
ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID)
ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set
ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields
ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields
ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos
ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence
ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos
ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence
ok 49 438e - Add pedit action with LAYERED_OP ip clear tos
ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence
ok 51 824a - Add pedit action with LAYERED_OP ip invert tos
ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence
ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport
ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code
ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID)
ok 56 815c - Add pedit action with LAYERED_OP ip6 set src
ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst
ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst
ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)
ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class
ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl
ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit
ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport
ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID)
ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set
ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields
ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport
ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1
ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2

Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers")
Fixes: f67169fef8db ("net/sched: act_pedit: fix WARN() in the traffic path")
Reviewed-by: Jamal Hadi Salim 
Signed-off-by: Pedro Tammela 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net/sched: transition act_pedit to rcu and percpu stats

2023-03-11T12:50:33+00:00

[ Upstream commit 52cf89f78c01bf39973f3e70d366921d70faff7a ]

The software pedit action didn't get the same love as some of the
other actions and it's still using spinlocks and shared stats in the
datapath.
Transition the action to rcu and percpu stats as this improves the
action's performance dramatically on multiple cpu deployments.

Reviewed-by: Jamal Hadi Salim 
Signed-off-by: Pedro Tammela 
Reviewed-by: Simon Horman 
Signed-off-by: Paolo Abeni 
Stable-dep-of: e9e42292ea76 ("net/sched: act_pedit: fix action bind logic")
Signed-off-by: Sasha Levin