linux-stable.git/net/rxrpc, branch v5.3.2

rxrpc: Fix misplaced traceline

2019-09-04T22:24:58+00:00

There's a misplaced traceline in rxrpc_input_packet() which is looking at a
packet that just got released rather than the replacement packet.

Fix this by moving the traceline after the assignment that moves the new
packet pointer to the actual packet pointer.

Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Hillf Danton 
Signed-off-by: David Howells 
Signed-off-by: David S. Miller

rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2]

2019-08-30T22:06:52+00:00

When a local endpoint is ceases to be in use, such as when the kafs module
is unloaded, the kernel will emit an assertion failure if there are any
outstanding client connections:

	rxrpc: Assertion failed
	------------[ cut here ]------------
	kernel BUG at net/rxrpc/local_object.c:433!

and even beyond that, will evince other oopses if there are service
connections still present.

Fix this by:

 (1) Removing the triggering of connection reaping when an rxrpc socket is
     released.  These don't actually clean up the connections anyway - and
     further, the local endpoint may still be in use through another
     socket.

 (2) Mark the local endpoint as dead when we start the process of tearing
     it down.

 (3) When destroying a local endpoint, strip all of its client connections
     from the idle list and discard the ref on each that the list was
     holding.

 (4) When destroying a local endpoint, call the service connection reaper
     directly (rather than through a workqueue) to immediately kill off all
     outstanding service connections.

 (5) Make the service connection reaper reap connections for which the
     local endpoint is marked dead.

Only after destroying the connections can we close the socket lest we get
an oops in a workqueue that's looking at a connection or a peer.

Fixes: 3d18cbb7fd0c ("rxrpc: Fix conn expiry timers")
Signed-off-by: David Howells 
Tested-by: Marc Dionne 
Signed-off-by: David S. Miller

rxrpc: Use skb_unshare() rather than skb_cow_data()

2019-08-27T09:13:46+00:00

The in-place decryption routines in AF_RXRPC's rxkad security module
currently call skb_cow_data() to make sure the data isn't shared and that
the skb can be written over.  This has a problem, however, as the softirq
handler may be still holding a ref or the Rx ring may be holding multiple
refs when skb_cow_data() is called in rxkad_verify_packet() - and so
skb_shared() returns true and __pskb_pull_tail() dislikes that.  If this
occurs, something like the following report will be generated.

	kernel BUG at net/core/skbuff.c:1463!
	...
	RIP: 0010:pskb_expand_head+0x253/0x2b0
	...
	Call Trace:
	 __pskb_pull_tail+0x49/0x460
	 skb_cow_data+0x6f/0x300
	 rxkad_verify_packet+0x18b/0xb10 [rxrpc]
	 rxrpc_recvmsg_data.isra.11+0x4a8/0xa10 [rxrpc]
	 rxrpc_kernel_recv_data+0x126/0x240 [rxrpc]
	 afs_extract_data+0x51/0x2d0 [kafs]
	 afs_deliver_fs_fetch_data+0x188/0x400 [kafs]
	 afs_deliver_to_call+0xac/0x430 [kafs]
	 afs_wait_for_call_to_complete+0x22f/0x3d0 [kafs]
	 afs_make_call+0x282/0x3f0 [kafs]
	 afs_fs_fetch_data+0x164/0x300 [kafs]
	 afs_fetch_data+0x54/0x130 [kafs]
	 afs_readpages+0x20d/0x340 [kafs]
	 read_pages+0x66/0x180
	 __do_page_cache_readahead+0x188/0x1a0
	 ondemand_readahead+0x17d/0x2e0
	 generic_file_read_iter+0x740/0xc10
	 __vfs_read+0x145/0x1a0
	 vfs_read+0x8c/0x140
	 ksys_read+0x4a/0xb0
	 do_syscall_64+0x43/0xf0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by using skb_unshare() instead in the input path for DATA packets
that have a security index != 0.  Non-DATA packets don't need in-place
encryption and neither do unencrypted DATA packets.

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Julian Wollrath 
Signed-off-by: David Howells

rxrpc: Use the tx-phase skb flag to simplify tracing

2019-08-27T09:04:18+00:00

Use the previously-added transmit-phase skbuff private flag to simplify the
socket buffer tracing a bit.  Which phase the skbuff comes from can now be
divined from the skb rather than having to be guessed from the call state.

We can also reduce the number of rxrpc_skb_trace values by eliminating the
difference between Tx and Rx in the symbols.

Signed-off-by: David Howells

rxrpc: Add a private skb flag to indicate transmission-phase skbs

2019-08-27T09:03:26+00:00

    
Add a flag in the private data on an skbuff to indicate that this is a
transmission-phase buffer rather than a receive-phase buffer.

Signed-off-by: David Howells

rxrpc: Abstract out rxtx ring cleanup

2019-08-27T09:03:26+00:00

Abstract out rxtx ring cleanup into its own function from its two callers.
This makes it easier to apply the same changes to both.

Signed-off-by: David Howells

rxrpc: Pass the input handler's data skb reference to the Rx ring

2019-08-27T08:59:19+00:00

Pass the reference held on a DATA skb in the rxrpc input handler into the
Rx ring rather than getting an additional ref for this and then dropping
the original ref at the end.

Signed-off-by: David Howells

rxrpc: Use info in skbuff instead of reparsing a jumbo packet

2019-08-27T08:51:30+00:00

Use the information now cached in the skbuff private data to avoid the need
to reparse a jumbo packet.  We can find all the subpackets by dead
reckoning, so it's only necessary to note how many there are, whether the
last one is flagged as LAST_PACKET and whether any have the REQUEST_ACK
flag set.

This is necessary as once recvmsg() can see the packet, it can start
modifying it, such as doing in-place decryption.

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells

rxrpc: Improve jumbo packet counting

2019-08-27T08:48:37+00:00

Improve the information stored about jumbo packets so that we don't need to
reparse them so much later.

Signed-off-by: David Howells 
Reviewed-by: Jeffrey Altman

rxrpc: Fix read-after-free in rxrpc_queue_local()

2019-08-14T10:37:51+00:00

rxrpc_queue_local() attempts to queue the local endpoint it is given and
then, if successful, prints a trace line.  The trace line includes the
current usage count - but we're not allowed to look at the local endpoint
at this point as we passed our ref on it to the workqueue.

Fix this by reading the usage count before queuing the work item.

Also fix the reading of local->debug_id for trace lines, which must be done
with the same consideration as reading the usage count.

Fixes: 09d2bf595db4 ("rxrpc: Add a tracepoint to track rxrpc_local refcounting")
Reported-by: syzbot+78e71c5bab4f76a6a719@syzkaller.appspotmail.com
Signed-off-by: David Howells