linux-stable.git/net/rds, branch linux-6.8.y

net/rds: fix possible cp null dereference

2024-04-10T14:38:02+00:00

commit 62fc3357e079a07a22465b9b6ef71bb6ea75ee4b upstream.

cp might be null, calling cp->cp_conn would produce null dereference

[Simon Horman adds:]

Analysis:

* cp is a parameter of __rds_rdma_map and is not reassigned.

* The following call-sites pass a NULL cp argument to __rds_rdma_map()

  - rds_get_mr()
  - rds_get_mr_for_dest

* Prior to the code above, the following assumes that cp may be NULL
  (which is indicative, but could itself be unnecessary)

	trans_private = rs->rs_transport->get_mr(
		sg, nents, rs, &mr->r_key, cp ? cp->cp_conn : NULL,
		args->vec.addr, args->vec.bytes,
		need_odp ? ODP_ZEROBASED : ODP_NOT_NEEDED);

* The code modified by this patch is guarded by IS_ERR(trans_private),
  where trans_private is assigned as per the previous point in this analysis.

  The only implementation of get_mr that I could locate is rds_ib_get_mr()
  which can return an ERR_PTR if the conn (4th) argument is NULL.

* ret is set to PTR_ERR(trans_private).
  rds_ib_get_mr can return ERR_PTR(-ENODEV) if the conn (4th) argument is NULL.
  Thus ret may be -ENODEV in which case the code in question will execute.

Conclusion:
* cp may be NULL at the point where this patch adds a check;
  this patch does seem to address a possible bug

Fixes: c055fc00c07b ("net/rds: fix WARNING in rds_conn_connect_if_down")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mahmoud Adam 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20240326153132.55580-1-mngyadam@amazon.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

rds: introduce acquire/release ordering in acquire/release_in_xmit()

2024-03-26T22:17:35+00:00

[ Upstream commit 1422f28826d2a0c11e5240b3e951c9e214d8656e ]

acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).

Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.

Fixes: 0f4b1c7e89e6 ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7eacfd ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi 
Reviewed-by: Michal Kubiak 
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net/rds: fix WARNING in rds_conn_connect_if_down

2024-03-06T11:58:42+00:00

If connection isn't established yet, get_mr() will fail, trigger connection after
get_mr().

Fixes: 584a8279a44a ("RDS: RDMA: return appropriate error on rdma map failures")
Reported-and-tested-by: syzbot+d4faee732755bba9838e@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis 
Signed-off-by: David S. Miller

net:rds: Fix possible deadlock in rds_message_put

2024-02-13T09:25:30+00:00

Functions rds_still_queued and rds_clear_recv_queue lock a given socket
in order to safely iterate over the incoming rds messages. However
calling rds_inc_put while under this lock creates a potential deadlock.
rds_inc_put may eventually call rds_message_purge, which will lock
m_rs_lock. This is the incorrect locking order since m_rs_lock is
meant to be locked before the socket. To fix this, we move the message
item to a local list or variable that wont need rs_recv_lock protection.
Then we can safely call rds_inc_put on any item stored locally after
rs_recv_lock is released.

Fixes: bdbe6fbc6a2f ("RDS: recv.c")
Reported-by: syzbot+f9db6ff27b9bfdcfeca0@syzkaller.appspotmail.com
Reported-by: syzbot+dcd73ff9291e6d34b3ab@syzkaller.appspotmail.com
Signed-off-by: Allison Henderson 
Link: https://lore.kernel.org/r/20240209022854.200292-1-allison.henderson@oracle.com
Signed-off-by: Paolo Abeni

net/rds: Fix UBSAN: array-index-out-of-bounds in rds_cmsg_recv

2024-01-22T11:24:00+00:00

Syzcaller UBSAN crash occurs in rds_cmsg_recv(),
which reads inc->i_rx_lat_trace[j + 1] with index 4 (3 + 1),
but with array size of 4 (RDS_RX_MAX_TRACES).
Here 'j' is assigned from rs->rs_rx_trace[i] and in-turn from
trace.rx_trace_pos[i] in rds_recv_track_latency(),
with both arrays sized 3 (RDS_MSG_RX_DGRAM_TRACE_MAX). So fix the
off-by-one bounds check in rds_recv_track_latency() to prevent
a potential crash in rds_cmsg_recv().

Found by syzcaller:
=================================================================
UBSAN: array-index-out-of-bounds in net/rds/recv.c:585:39
index 4 is out of range for type 'u64 [4]'
CPU: 1 PID: 8058 Comm: syz-executor228 Not tainted 6.6.0-gd2f51b3516da #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.15.0-1 04/01/2014
Call Trace:
 
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x136/0x150 lib/dump_stack.c:106
 ubsan_epilogue lib/ubsan.c:217 [inline]
 __ubsan_handle_out_of_bounds+0xd5/0x130 lib/ubsan.c:348
 rds_cmsg_recv+0x60d/0x700 net/rds/recv.c:585
 rds_recvmsg+0x3fb/0x1610 net/rds/recv.c:716
 sock_recvmsg_nosec net/socket.c:1044 [inline]
 sock_recvmsg+0xe2/0x160 net/socket.c:1066
 __sys_recvfrom+0x1b6/0x2f0 net/socket.c:2246
 __do_sys_recvfrom net/socket.c:2264 [inline]
 __se_sys_recvfrom net/socket.c:2260 [inline]
 __x64_sys_recvfrom+0xe0/0x1b0 net/socket.c:2260
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b
==================================================================

Fixes: 3289025aedc0 ("RDS: add receive message trace used by application")
Reported-by: Chenyuan Yang 
Closes: https://lore.kernel.org/linux-rdma/CALGdzuoVdq-wtQ4Az9iottBqC5cv9ZhcE5q8N7LfYFvkRsOVcw@mail.gmail.com/
Signed-off-by: Sharath Srinivasan 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

ipv6: annotate data-races around np->mcast_oif

2023-12-11T10:59:17+00:00

np->mcast_oif is read locklessly in some contexts.

Make all accesses to this field lockless, adding appropriate
annotations.

This also makes setsockopt( IPV6_MULTICAST_IF ) lockless.

Signed-off-by: Eric Dumazet 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

net: prevent address rewrite in kernel_bind()

2023-10-01T18:31:29+00:00

Similar to the change in commit 0bdf399342c5("net: Avoid address
overwrite in kernel_connect"), BPF hooks run on bind may rewrite the
address passed to kernel_bind(). This change

1) Makes a copy of the bind address in kernel_bind() to insulate
   callers.
2) Replaces direct calls to sock->ops->bind() in net with kernel_bind()

Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/
Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind")
Cc: stable@vger.kernel.org
Reviewed-by: Willem de Bruijn 
Signed-off-by: Jordan Rife 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

net: replace calls to sock->ops->connect() with kernel_connect()

2023-10-01T18:31:29+00:00

commit 0bdf399342c5 ("net: Avoid address overwrite in kernel_connect")
ensured that kernel_connect() will not overwrite the address parameter
in cases where BPF connect hooks perform an address rewrite. This change
replaces direct calls to sock->ops->connect() in net with kernel_connect()
to make these call safe.

Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/
Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect")
Cc: stable@vger.kernel.org
Reviewed-by: Willem de Bruijn 
Signed-off-by: Jordan Rife 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

net: rds: Fix possible NULL-pointer dereference

2023-09-20T07:49:03+00:00

In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists
before dereferencing it as rdma_set_service_type() argument

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: fd261ce6a30e ("rds: rdma: update rdma transport for tos")
Signed-off-by: Artem Chernyshev 
Signed-off-by: David S. Miller

Merge tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

2023-08-30T00:39:15+00:00

Pull sysctl updates from Luis Chamberlain:
 "Long ago we set out to remove the kitchen sink on kernel/sysctl.c
  arrays and placings sysctls to their own sybsystem or file to help
  avoid merge conflicts. Matthew Wilcox pointed out though that if we're
  going to do that we might as well also *save* space while at it and
  try to remove the extra last sysctl entry added at the end of each
  array, a sentintel, instead of bloating the kernel by adding a new
  sentinel with each array moved.

  Doing that was not so trivial, and has required slowing down the moves
  of kernel/sysctl.c arrays and measuring the impact on size by each new
  move.

  The complex part of the effort to help reduce the size of each sysctl
  is being done by the patient work of el señor Don Joel Granados. A lot
  of this is truly painful code refactoring and testing and then trying
  to measure the savings of each move and removing the sentinels.
  Although Joel already has code which does most of this work,
  experience with sysctl moves in the past shows is we need to be
  careful due to the slew of odd build failures that are possible due to
  the amount of random Kconfig options sysctls use.

  To that end Joel's work is split by first addressing the major
  housekeeping needed to remove the sentinels, which is part of this
  merge request. The rest of the work to actually remove the sentinels
  will be done later in future kernel releases.

  The preliminary math is showing this will all help reduce the overall
  build time size of the kernel and run time memory consumed by the
  kernel by about ~64 bytes per array where we are able to remove each
  sentinel in the future. That also means there is no more bloating the
  kernel with the extra ~64 bytes per array moved as no new sentinels
  are created"

* tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: Use ctl_table_size as stopping criteria for list macro
  sysctl: SIZE_MAX->ARRAY_SIZE in register_net_sysctl
  vrf: Update to register_net_sysctl_sz
  networking: Update to register_net_sysctl_sz
  netfilter: Update to register_net_sysctl_sz
  ax.25: Update to register_net_sysctl_sz
  sysctl: Add size to register_net_sysctl function
  sysctl: Add size arg to __register_sysctl_init
  sysctl: Add size to register_sysctl
  sysctl: Add a size arg to __register_sysctl_table
  sysctl: Add size argument to init_header
  sysctl: Add ctl_table_size to ctl_table_header
  sysctl: Use ctl_table_header in list_for_each_table_entry
  sysctl: Prefer ctl_table_header in proc_sysctl