linux-stable.git/net/openvswitch, branch v5.17.2

openvswitch: Fixed nd target mask field in the flow dump.

2022-04-08T11:59:03+00:00

commit f19c44452b58a84d95e209b847f5495d91c9983a upstream.

IPv6 nd target mask was not getting populated in flow dump.

In the function __ovs_nla_put_key the icmp code mask field was checked
instead of icmp code key field to classify the flow as neighbour discovery.

ufid:bdfbe3e5-60c2-43b0-a5ff-dfcac1c37328, recirc_id(0),dp_hash(0/0),
skb_priority(0/0),in_port(ovs-nm1),skb_mark(0/0),ct_state(0/0),
ct_zone(0/0),ct_mark(0/0),ct_label(0/0),
eth(src=00:00:00:00:00:00/00:00:00:00:00:00,
dst=00:00:00:00:00:00/00:00:00:00:00:00),
eth_type(0x86dd),
ipv6(src=::/::,dst=::/::,label=0/0,proto=58,tclass=0/0,hlimit=0/0,frag=no),
icmpv6(type=135,code=0),
nd(target=2001::2/::,
sll=00:00:00:00:00:00/00:00:00:00:00:00,
tll=00:00:00:00:00:00/00:00:00:00:00:00),
packets:10, bytes:860, used:0.504s, dp:ovs, actions:ovs-nm2

Fixes: e64457191a25 (openvswitch: Restructure datapath.c and flow.c)
Signed-off-by: Martin Varghese 
Link: https://lore.kernel.org/r/20220328054148.3057-1-martinvarghesenokia@gmail.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Greg Kroah-Hartman

openvswitch: always update flow key after nat

2022-04-08T11:58:22+00:00

[ Upstream commit 60b44ca6bd7518dd38fa2719bc9240378b6172c3 ]

During NAT, a tuple collision may occur.  When this happens, openvswitch
will make a second pass through NAT which will perform additional packet
modification.  This will update the skb data, but not the flow key that
OVS uses.  This means that future flow lookups, and packet matches will
have incorrect data.  This has been supported since
5d50aa83e2c8 ("openvswitch: support asymmetric conntrack").

That commit failed to properly update the sw_flow_key attributes, since
it only called the ovs_ct_nat_update_key once, rather than each time
ovs_ct_nat_execute was called.  As these two operations are linked, the
ovs_ct_nat_execute() function should always make sure that the
sw_flow_key is updated after a successful call through NAT infrastructure.

Fixes: 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack")
Cc: Dumitru Ceara 
Cc: Numan Siddique 
Signed-off-by: Aaron Conole 
Acked-by: Eelco Chaudron 
Link: https://lore.kernel.org/r/20220318124319.3056455-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

openvswitch: Fix setting ipv6 fields causing hw csum failure

2022-02-24T17:16:21+00:00

Ipv6 ttl, label and tos fields are modified without first
pulling/pushing the ipv6 header, which would have updated
the hw csum (if available). This might cause csum validation
when sending the packet to the stack, as can be seen in
the trace below.

Fix this by updating skb->csum if available.

Trace resulted by ipv6 ttl dec and then sending packet
to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]:
[295241.900063] s_pf0vf2: hw csum failure
[295241.923191] Call Trace:
[295241.925728]  
[295241.927836]  dump_stack+0x5c/0x80
[295241.931240]  __skb_checksum_complete+0xac/0xc0
[295241.935778]  nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack]
[295241.953030]  nf_conntrack_in+0x498/0x5e0 [nf_conntrack]
[295241.958344]  __ovs_ct_lookup+0xac/0x860 [openvswitch]
[295241.968532]  ovs_ct_execute+0x4a7/0x7c0 [openvswitch]
[295241.979167]  do_execute_actions+0x54a/0xaa0 [openvswitch]
[295242.001482]  ovs_execute_actions+0x48/0x100 [openvswitch]
[295242.006966]  ovs_dp_process_packet+0x96/0x1d0 [openvswitch]
[295242.012626]  ovs_vport_receive+0x6c/0xc0 [openvswitch]
[295242.028763]  netdev_frame_hook+0xc0/0x180 [openvswitch]
[295242.034074]  __netif_receive_skb_core+0x2ca/0xcb0
[295242.047498]  netif_receive_skb_internal+0x3e/0xc0
[295242.052291]  napi_gro_receive+0xba/0xe0
[295242.056231]  mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core]
[295242.062513]  mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core]
[295242.067669]  mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core]
[295242.077958]  net_rx_action+0x149/0x3b0
[295242.086762]  __do_softirq+0xd7/0x2d6
[295242.090427]  irq_exit+0xf7/0x100
[295242.093748]  do_IRQ+0x7f/0xd0
[295242.096806]  common_interrupt+0xf/0xf
[295242.100559]  
[295242.102750] RIP: 0033:0x7f9022e88cbd
[295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda
[295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000
[295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30
[295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340
[295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000
[295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40

Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action")
Signed-off-by: Paul Blakey 
Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-01-10T01:00:17+00:00

Merge in fixes directly in prep for the 5.17 merge window.
No conflicts.

Signed-off-by: Jakub Kicinski

net: openvswitch: Fix ct_state nat flags for conns arriving from tc

2022-01-10T00:24:12+00:00

Netfilter conntrack maintains NAT flags per connection indicating
whether NAT was configured for the connection. Openvswitch maintains
NAT flags on the per packet flow key ct_state field, indicating
whether NAT was actually executed on the packet.

When a packet misses from tc to ovs the conntrack NAT flags are set.
However, NAT was not necessarily executed on the packet because the
connection's state might still be in NEW state. As such, openvswitch
wrongly assumes that NAT was executed and sets an incorrect flow key
NAT flags.

Fix this, by flagging to openvswitch which NAT was actually done in
act_ct via tc_skb_ext and tc_skb_cb to the openvswitch module, so
the packet flow key NAT flags will be correctly set.

Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Paul Blakey 
Acked-by: Jamal Hadi Salim 
Link: https://lore.kernel.org/r/20220106153804.26451-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next

2022-01-09T23:59:23+00:00

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next. This
includes one patch to update ovs and act_ct to use nf_ct_put() instead
of nf_conntrack_put().

1) Add netns_tracker to nfnetlink_log and masquerade, from Eric Dumazet.

2) Remove redundant rcu read-size lock in nf_tables packet path.

3) Replace BUG() by WARN_ON_ONCE() in nft_payload.

4) Consolidate rule verdict tracing.

5) Replace WARN_ON() by WARN_ON_ONCE() in nf_tables core.

6) Make counter support built-in in nf_tables.

7) Add new field to conntrack object to identify locally generated
   traffic, from Florian Westphal.

8) Prevent NAT from shadowing well-known ports, from Florian Westphal.

9) Merge nf_flow_table_{ipv4,ipv6} into nf_flow_table_inet, also from
   Florian.

10) Remove redundant pointer in nft_pipapo AVX2 support, from Colin Ian King.

11) Replace opencoded max() in conntrack, from Jiapeng Chong.

12) Update conntrack to use refcount_t API, from Florian Westphal.

13) Move ip_ct_attach indirection into the nf_ct_hook structure.

14) Constify several pointer object in the netfilter codebase,
    from Florian Westphal.

15) Tree-wide replacement of nf_conntrack_put() by nf_ct_put(), also
    from Florian.

16) Fix egress splat due to incorrect rcu notation, from Florian.

17) Move stateful fields of connlimit, last, quota, numgen and limit
    out of the expression data area.

18) Build a blob to represent the ruleset in nf_tables, this is a
    requirement of the new register tracking infrastructure.

19) Add NFT_REG32_NUM to define the maximum number of 32-bit registers.

20) Add register tracking infrastructure to skip redundant
    store-to-register operations, this includes support for payload,
    meta and bitwise expresssions.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: (32 commits)
  netfilter: nft_meta: cancel register tracking after meta update
  netfilter: nft_payload: cancel register tracking after payload update
  netfilter: nft_bitwise: track register operations
  netfilter: nft_meta: track register operations
  netfilter: nft_payload: track register operations
  netfilter: nf_tables: add register tracking infrastructure
  netfilter: nf_tables: add NFT_REG32_NUM
  netfilter: nf_tables: add rule blob layout
  netfilter: nft_limit: move stateful fields out of expression data
  netfilter: nft_limit: rename stateful structure
  netfilter: nft_numgen: move stateful fields out of expression data
  netfilter: nft_quota: move stateful fields out of expression data
  netfilter: nft_last: move stateful fields out of expression data
  netfilter: nft_connlimit: move stateful fields out of expression data
  netfilter: egress: avoid a lockdep splat
  net: prefer nf_ct_put instead of nf_conntrack_put
  netfilter: conntrack: avoid useless indirection during conntrack destruction
  netfilter: make function op structures const
  netfilter: core: move ip_ct_attach indirection to struct nf_ct_hook
  netfilter: conntrack: convert to refcount_t api
  ...
====================

Link: https://lore.kernel.org/r/20220109231640.104123-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski

net: prefer nf_ct_put instead of nf_conntrack_put

2022-01-09T22:30:14+00:00

Its the same as nf_conntrack_put(), but without the
need for an indirect call.  The downside is a module dependency on
nf_conntrack, but all of these already depend on conntrack anyway.

Cc: Paul Blakey 
Cc: dev@openvswitch.org
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso

netfilter: conntrack: convert to refcount_t api

2022-01-09T22:30:13+00:00

Convert nf_conn reference counting from atomic_t to refcount_t based api.
refcount_t api provides more runtime sanity checks and will warn on
certain constructs, e.g. refcount_inc() on a zero reference count, which
usually indicates use-after-free.

For this reason template allocation is changed to init the refcount to
1, the subsequenct add operations are removed.

Likewise, init_conntrack() is changed to set the initial refcount to 1
instead refcount_inc().

This is safe because the new entry is not (yet) visible to other cpus.

Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso

net: openvswitch: Fill act ct extension

2022-01-04T12:12:56+00:00

To give drivers the originating device information for optimized
connection tracking offload, fill in act ct extension with
ifindex from skb.

Signed-off-by: Paul Blakey 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-12-24T00:09:58+00:00

include/net/sock.h
  commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules")
  commit 43f51df41729 ("net: move early demux fields close to sk_refcnt")
  https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/

Signed-off-by: Jakub Kicinski