linux-stable.git/net/openvswitch, branch v4.9.232

openvswitch: support asymmetric conntrack

2019-12-21T09:42:23+00:00

[ Upstream commit 5d50aa83e2c8e91ced2cca77c198b468ca9210f4 ]

The openvswitch module shares a common conntrack and NAT infrastructure
exposed via netfilter.  It's possible that a packet needs both SNAT and
DNAT manipulation, due to e.g. tuple collision.  Netfilter can support
this because it runs through the NAT table twice - once on ingress and
again after egress.  The openvswitch module doesn't have such capability.

Like netfilter hook infrastructure, we should run through NAT twice to
keep the symmetry.

Fixes: 05752523e565 ("openvswitch: Interface with NAT.")
Signed-off-by: Aaron Conole 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

openvswitch: remove another BUG_ON()

2019-12-05T14:35:28+00:00

[ Upstream commit 8a574f86652a4540a2433946ba826ccb87f398cc ]

If we can't build the flow del notification, we can simply delete
the flow, no need to crash the kernel. Still keep a WARN_ON to
preserve debuggability.

Note: the BUG_ON() predates the Fixes tag, but this change
can be applied only after the mentioned commit.

v1 -> v2:
 - do not leak an skb on error

Fixes: aed067783e50 ("openvswitch: Minimize ovs_flow_cmd_del critical section.")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()

2019-12-05T14:35:27+00:00

[ Upstream commit 8ffeb03fbba3b599690b361467bfd2373e8c450f ]

All the callers of ovs_flow_cmd_build_info() already deal with
error return code correctly, so we can handle the error condition
in a more gracefull way. Still dump a warning to preserve
debuggability.

v1 -> v2:
 - clarify the commit message
 - clean the skb and report the error (DaveM)

Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

openvswitch: fix flow command message size

2019-12-05T14:35:26+00:00

[ Upstream commit 4e81c0b3fa93d07653e2415fa71656b080a112fd ]

When user-space sets the OVS_UFID_F_OMIT_* flags, and the relevant
flow has no UFID, we can exceed the computed size, as
ovs_nla_put_identifier() will always dump an OVS_FLOW_ATTR_KEY
attribute.
Take the above in account when computing the flow command message
size.

Fixes: 74ed7ab9264c ("openvswitch: Add support for unique flow IDs.")
Reported-by: Qi Jun Ding 
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ovs: fix return type of ndo_start_xmit function

2019-11-25T08:53:15+00:00

[ Upstream commit eddf11e18dff0e8671e06ce54e64cfc843303ab9 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

openvswitch: change type of UPCALL_PID attribute to NLA_UNSPEC

2019-10-05T10:30:13+00:00

[ Upstream commit ea8564c865299815095bebeb4b25bef474218e4c ]

userspace openvswitch patch "(dpif-linux: Implement the API
functions to allow multiple handler threads read upcall)"
changes its type from U32 to UNSPEC, but leave the kernel
unchanged

and after kernel 6e237d099fac "(netlink: Relax attr validation
for fixed length types)", this bug is exposed by the below
warning

	[   57.215841] netlink: 'ovs-vswitchd': attribute type 5 has an invalid length.

Fixes: 5cd667b0a456 ("openvswitch: Allow each vport to have an array of 'port_id's")
Signed-off-by: Li RongQing 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: openvswitch: fix csum updates for MPLS actions

2019-08-04T07:33:33+00:00

[ Upstream commit 0e3183cd2a64843a95b62f8bd4a83605a4cf0615 ]

Skbs may have their checksum value populated by HW. If this is a checksum
calculated over the entire packet then the CHECKSUM_COMPLETE field is
marked. Changes to the data pointer on the skb throughout the network
stack still try to maintain this complete csum value if it is required
through functions such as skb_postpush_rcsum.

The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when
changes are made to packet data without a push or a pull. This occurs when
the ethertype of the MAC header is changed or when MPLS lse fields are
modified.

The modification is carried out using the csum_partial function to get the
csum of a buffer and add it into the larger checksum. The buffer is an
inversion of the data to be removed followed by the new data. Because the
csum is calculated over 16 bits and these values align with 16 bits, the
effect is the removal of the old value from the CHECKSUM_COMPLETE and
addition of the new value.

However, the csum fed into the function and the outcome of the
calculation are also inverted. This would only make sense if it was the
new value rather than the old that was inverted in the input buffer.

Fix the issue by removing the bit inverts in the csum_partial calculation.

The bug was verified and the fix tested by comparing the folded value of
the updated CHECKSUM_COMPLETE value with the folded value of a full
software checksum calculation (reset skb->csum to 0 and run
skb_checksum_complete(skb)). Prior to the fix the outcomes differed but
after they produce the same result.

Fixes: 25cd9ba0abc0 ("openvswitch: Add basic MPLS support to kernel")
Fixes: bc7cc5999fd3 ("openvswitch: update checksum in {push,pop}_mpls")
Signed-off-by: John Hurley 
Reviewed-by: Jakub Kicinski 
Reviewed-by: Simon Horman 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: remove dependency of nf_defrag_ipv6 on ipv6 module

2019-05-02T07:32:06+00:00

[ Upstream commit 70b095c84326640eeacfd69a411db8fc36e8ab1a ]

IPV6=m
DEFRAG_IPV6=m
CONNTRACK=y yields:

net/netfilter/nf_conntrack_proto.o: In function `nf_ct_netns_do_get':
net/netfilter/nf_conntrack_proto.c:802: undefined reference to `nf_defrag_ipv6_enable'
net/netfilter/nf_conntrack_proto.o:(.rodata+0x640): undefined reference to `nf_conntrack_l4proto_icmpv6'

Setting DEFRAG_IPV6=y causes undefined references to ip6_rhash_params
ip6_frag_init and ip6_expire_frag_queue so it would be needed to force
IPV6=y too.

This patch gets rid of the 'followup linker error' by removing
the dependency of ipv6.ko symbols from netfilter ipv6 defrag.

Shared code is placed into a header, then used from both.

Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

openvswitch: fix flow actions reallocation

2019-04-17T06:36:44+00:00

[ Upstream commit f28cd2af22a0c134e4aa1c64a70f70d815d473fb ]

The flow action buffer can be resized if it's not big enough to contain
all the requested flow actions. However, this resize doesn't take into
account the new requested size, the buffer is only increased by a factor
of 2x. This might be not enough to contain the new data, causing a
buffer overflow, for example:

[   42.044472] =============================================================================
[   42.045608] BUG kmalloc-96 (Not tainted): Redzone overwritten
[   42.046415] -----------------------------------------------------------------------------

[   42.047715] Disabling lock debugging due to kernel taint
[   42.047716] INFO: 0x8bf2c4a5-0x720c0928. First byte 0x0 instead of 0xcc
[   42.048677] INFO: Slab 0xbc6d2040 objects=29 used=18 fp=0xdc07dec4 flags=0x2808101
[   42.049743] INFO: Object 0xd53a3464 @offset=2528 fp=0xccdcdebb

[   42.050747] Redzone 76f1b237: cc cc cc cc cc cc cc cc                          ........
[   42.051839] Object d53a3464: 6b 6b 6b 6b 6b 6b 6b 6b 0c 00 00 00 6c 00 00 00  kkkkkkkk....l...
[   42.053015] Object f49a30cc: 6c 00 0c 00 00 00 00 00 00 00 00 03 78 a3 15 f6  l...........x...
[   42.054203] Object acfe4220: 20 00 02 00 ff ff ff ff 00 00 00 00 00 00 00 00   ...............
[   42.055370] Object 21024e91: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   42.056541] Object 070e04c3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   42.057797] Object 948a777a: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   42.059061] Redzone 8bf2c4a5: 00 00 00 00                                      ....
[   42.060189] Padding a681b46e: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ

Fix by making sure the new buffer is properly resized to contain all the
requested data.

BugLink: https://bugs.launchpad.net/bugs/1813244
Signed-off-by: Andrea Righi 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

openvswitch: Avoid OOB read when parsing flow nlattrs

2019-01-31T07:12:33+00:00

[ Upstream commit 04a4af334b971814eedf4e4a413343ad3287d9a9 ]

For nested and variable attributes, the expected length of an attribute
is not known and marked by a negative number.  This results in an OOB
read when the expected length is later used to check if the attribute is
all zeros. Fix this by using the actual length of the attribute rather
than the expected length.

Signed-off-by: Ross Lagerwall 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman