linux-stable.git/net/nfc, branch v5.4.178

nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()

2022-01-27T08:19:26+00:00

commit dded08927ca3c31a5c37f8e7f95fe98770475dd4 upstream.

Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer
(which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after
a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM.

KASAN report:

  BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0
  Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899

  CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
  Call Trace:
   
   dump_stack_lvl+0x45/0x59
   ? nfc_alloc_send_skb+0x2d/0xc0
   __kasan_report.cold+0x117/0x11c
   ? mark_lock+0x480/0x4f0
   ? nfc_alloc_send_skb+0x2d/0xc0
   kasan_report+0x38/0x50
   nfc_alloc_send_skb+0x2d/0xc0
   nfc_llcp_send_ui_frame+0x18c/0x2a0
   ? nfc_llcp_send_i_frame+0x230/0x230
   ? __local_bh_enable_ip+0x86/0xe0
   ? llcp_sock_connect+0x470/0x470
   ? llcp_sock_connect+0x470/0x470
   sock_sendmsg+0x8e/0xa0
   ____sys_sendmsg+0x253/0x3f0
   ...

The issue was visible only with multiple simultaneous calls to bind() and
sendmsg(), which resulted in most of the bind() calls to fail.  The
bind() was failing on checking if there is available WKS/SDP/SAP
(respective bit in 'struct nfc_llcp_local' fields).  When there was no
available WKS/SDP/SAP, the bind returned error but the sendmsg() to such
socket was able to trigger mentioned NULL pointer dereference of
nfc_llcp_sock->dev.

The code looks simply racy and currently it protects several paths
against race with checks for (!nfc_llcp_sock->local) which is NULL-ified
in error paths of bind().  The llcp_sock_sendmsg() did not have such
check but called function nfc_llcp_send_ui_frame() had, although not
protected with lock_sock().

Therefore the race could look like (same socket is used all the time):
  CPU0                                     CPU1
  ====                                     ====
  llcp_sock_bind()
  - lock_sock()
    - success
  - release_sock()
  - return 0
                                           llcp_sock_sendmsg()
                                           - lock_sock()
                                           - release_sock()
  llcp_sock_bind(), same socket
  - lock_sock()
    - error
                                           - nfc_llcp_send_ui_frame()
                                             - if (!llcp_sock->local)
    - llcp_sock->local = NULL
    - nfc_put_device(dev)
                                             - dereference llcp_sock->dev
  - release_sock()
  - return -ERRNO

The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the
lock, which is racy and ineffective check.  Instead, its caller
llcp_sock_sendmsg(), should perform the check inside lock_sock().

Reported-and-tested-by: syzbot+7f23bcddf626e0593a39@syzkaller.appspotmail.com
Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path")
Cc: 
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

nfc: fix segfault in nfc_genl_dump_devices_done

2021-12-17T09:12:23+00:00

commit fd79a0cbf0b2e34bcc45b13acf962e2032a82203 upstream.

When kmalloc in nfc_genl_dump_devices() fails then
nfc_genl_dump_devices_done() segfaults as below

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65025e-dirty #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014
Workqueue: events netlink_sock_destruct_work
RIP: 0010:klist_iter_exit+0x26/0x80
Call Trace:

class_dev_iter_exit+0x15/0x20
nfc_genl_dump_devices_done+0x3b/0x50
genl_lock_done+0x84/0xd0
netlink_sock_destruct+0x8f/0x270
__sk_destruct+0x64/0x3b0
sk_destruct+0xa8/0xd0
__sk_free+0x2e8/0x3d0
sk_free+0x51/0x90
netlink_sock_destruct_work+0x1c/0x20
process_one_work+0x411/0x710
worker_thread+0x6fd/0xa80

Link: https://syzkaller.appspot.com/bug?id=fc0fa5a53db9edd261d56e74325419faf18bd0df
Reported-by: syzbot+f9f76f4a0766420b4a02@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20211208182742.340542-1-tadeusz.struk@linaro.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done

2021-12-14T13:48:59+00:00

commit 4cd8371a234d051f9c9557fcbb1f8c523b1c0d10 upstream.

The done() netlink callback nfc_genl_dump_ses_done() should check if
received argument is non-NULL, because its allocation could fail earlier
in dumpit() (nfc_genl_dump_ses()).

Fixes: ac22ac466a65 ("NFC: Add a GET_SE netlink API")
Signed-off-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20211209081307.57337-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

NFC: add NCI_UNREG flag to eliminate the race

2021-12-01T08:23:35+00:00

commit 48b71a9e66c2eab60564b1b1c85f4928ed04e406 upstream.

There are two sites that calls queue_work() after the
destroy_workqueue() and lead to possible UAF.

The first site is nci_send_cmd(), which can happen after the
nci_close_device as below

nfcmrvl_nci_unregister_dev   |  nfc_genl_dev_up
  nci_close_device           |
    flush_workqueue          |
    del_timer_sync           |
  nci_unregister_device      |    nfc_get_device
    destroy_workqueue        |    nfc_dev_up
    nfc_unregister_device    |      nci_dev_up
      device_del             |        nci_open_device
                             |          __nci_request
                             |            nci_send_cmd
                             |              queue_work !!!

Another site is nci_cmd_timer, awaked by the nci_cmd_work from the
nci_send_cmd.

  ...                        |  ...
  nci_unregister_device      |  queue_work
    destroy_workqueue        |
    nfc_unregister_device    |  ...
      device_del             |  nci_cmd_work
                             |  mod_timer
                             |  ...
                             |  nci_cmd_timer
                             |    queue_work !!!

For the above two UAF, the root cause is that the nfc_dev_up can race
between the nci_unregister_device routine. Therefore, this patch
introduce NCI_UNREG flag to easily eliminate the possible race. In
addition, the mutex_lock in nci_close_device can act as a barrier.

Signed-off-by: Lin Ma 
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reviewed-by: Jakub Kicinski 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20211116152732.19238-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

NFC: reorder the logic in nfc_{un,}register_device

2021-11-26T09:47:20+00:00

[ Upstream commit 3e3b5dfcd16a3e254aab61bd1e8c417dd4503102 ]

There is a potential UAF between the unregistration routine and the NFC
netlink operations.

The race that cause that UAF can be shown as below:

 (FREE)                      |  (USE)
nfcmrvl_nci_unregister_dev   |  nfc_genl_dev_up
  nci_close_device           |
  nci_unregister_device      |    nfc_get_device
    nfc_unregister_device    |    nfc_dev_up
      rfkill_destory         |
      device_del             |      rfkill_blocked
  ...                        |    ...

The root cause for this race is concluded below:
1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after
the device_is_registered check.
2. Since the netlink operations are possible just after the device_add
in nfc_register_device, the nfc_dev_up() can happen anywhere during the
rfkill creation process, which leads to data race.

This patch reorder these actions to permit
1. Once device_del is finished, the nfc_dev_up cannot dereference the
rfkill object.
2. The rfkill_register need to be placed after the device_add of nfc_dev
because the parent device need to be created first. So this patch keeps
the order but inject device_lock to prevent the data race.

Signed-off-by: Lin Ma 
Fixes: be055b2f89b5 ("NFC: RFKILL support")
Reviewed-by: Jakub Kicinski 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20211116152652.19217-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

NFC: reorganize the functions in nci_request

2021-11-26T09:47:20+00:00

[ Upstream commit 86cdf8e38792545161dbe3350a7eced558ba4d15 ]

There is a possible data race as shown below:

thread-A in nci_request()       | thread-B in nci_close_device()
                                | mutex_lock(&ndev->req_lock);
test_bit(NCI_UP, &ndev->flags); |
...                             | test_and_clear_bit(NCI_UP, &ndev->flags)
mutex_lock(&ndev->req_lock);    |
                                |

This race will allow __nci_request() to be awaked while the device is
getting removed.

Similar to commit e2cb6b891ad2 ("bluetooth: eliminate the potential race
condition when removing the HCI controller"). this patch alters the
function sequence in nci_request() to prevent the data races between the
nci_close_device().

Signed-off-by: Lin Ma 
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Link: https://lore.kernel.org/r/20211115145600.8320-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

nfc: nci: fix the UAF of rf_conn_info object

2021-10-27T07:54:28+00:00

commit 1b1499a817c90fd1ce9453a2c98d2a01cca0e775 upstream.

The nci_core_conn_close_rsp_packet() function will release the conn_info
with given conn_id. However, it needs to set the rf_conn_info to NULL to
prevent other routines like nci_rf_intf_activated_ntf_packet() to trigger
the UAF.

Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Lin Ma 
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

NFC: digital: fix possible memory leak in digital_in_send_sdd_req()

2021-10-20T09:40:16+00:00

commit 291c932fc3692e4d211a445ba8aa35663831bac7 upstream.

'skb' is allocated in digital_in_send_sdd_req(), but not free when
digital_in_send_cmd() failed, which will cause memory leak. Fix it
by freeing 'skb' if digital_in_send_cmd() return failed.

Fixes: 2c66daecc409 ("NFC Digital: Add NFC-A technology support")
Signed-off-by: Ziyang Xuan 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()

2021-10-20T09:40:16+00:00

commit 58e7dcc9ca29c14e44267a4d0ea61e3229124907 upstream.

'params' is allocated in digital_tg_listen_mdaa(), but not free when
digital_send_cmd() failed, which will cause memory leak. Fix it by
freeing 'params' if digital_send_cmd() return failed.

Fixes: 1c7a4c24fbfd ("NFC Digital: Add target NFC-DEP support")
Signed-off-by: Ziyang Xuan 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

nfc: fix error handling of nfc_proto_register()

2021-10-20T09:40:16+00:00

commit 0911ab31896f0e908540746414a77dd63912748d upstream.

When nfc proto id is using, nfc_proto_register() return -EBUSY error
code, but forgot to unregister proto. Fix it by adding proto_unregister()
in the error handling case.

Fixes: c7fe3b52c128 ("NFC: add NFC socket family")
Signed-off-by: Ziyang Xuan 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20211013034932.2833737-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman