linux-stable.git/net/netfilter, branch v4.9.166 Linux kernel stable tree netfilter: nf_nat: skip nat clash resolution for same-origin entries 2019-03-13T21:05:00+00:00 Martynas Pumputis martynas@weave.works 2019-01-29T14:51:42+00:00 92044928a9029807aafdd2c5b7e4748e0cca3643 [ Upstream commit 4e35c1cb9460240e983a01745b5f29fe3a4d8e39 ] It is possible that two concurrent packets originating from the same socket of a connection-less protocol (e.g. UDP) can end up having different IP_CT_DIR_REPLY tuples which results in one of the packets being dropped. To illustrate this, consider the following simplified scenario: 1. Packet A and B are sent at the same time from two different threads by same UDP socket. No matching conntrack entry exists yet. Both packets cause allocation of a new conntrack entry. 2. get_unique_tuple gets called for A. No clashing entry found. conntrack entry for A is added to main conntrack table. 3. get_unique_tuple is called for B and will find that the reply tuple of B is already taken by A. It will allocate a new UDP source port for B to resolve the clash. 4. conntrack entry for B cannot be added to main conntrack table because its ORIGINAL direction is clashing with A and the REPLY directions of A and B are not the same anymore due to UDP source port reallocation done in step 3. This patch modifies nf_conntrack_tuple_taken so it doesn't consider colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal. [ Florian: simplify patch to not use .allow_clash setting and always ignore identical flows ] Signed-off-by: Martynas Pumputis <martynas@weave.works> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4e35c1cb9460240e983a01745b5f29fe3a4d8e39 ]

It is possible that two concurrent packets originating from the same
socket of a connection-less protocol (e.g. UDP) can end up having
different IP_CT_DIR_REPLY tuples which results in one of the packets
being dropped.

To illustrate this, consider the following simplified scenario:

1. Packet A and B are sent at the same time from two different threads
   by same UDP socket.  No matching conntrack entry exists yet.
   Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A.  No clashing entry found.
   conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply
   tuple of B is already taken by A.
   It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table
   because its ORIGINAL direction is clashing with A and the REPLY
   directions of A and B are not the same anymore due to UDP source
   port reallocation done in step 3.

This patch modifies nf_conntrack_tuple_taken so it doesn't consider
colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.

[ Florian: simplify patch to not use .allow_clash setting
  and always ignore identical flows ]

Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ipvs: Fix signed integer overflow when setsockopt timeout 2019-03-13T21:04:55+00:00 ZhangXiaoxu zhangxiaoxu5@huawei.com 2019-01-10T08:39:06+00:00 304e1f0723c4b2cd5727f5d25da9907294312cb9 [ Upstream commit 53ab60baa1ac4f20b080a22c13b77b6373922fd7 ] There is a UBSAN bug report as below: UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21 signed integer overflow: -2147483647 * 1000 cannot be represented in type 'int' Reproduce program: #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #define IPPROTO_IP 0 #define IPPROTO_RAW 255 #define IP_VS_BASE_CTL (64+1024+64) #define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10) /* The argument to IP_VS_SO_GET_TIMEOUT */ struct ipvs_timeout_t { int tcp_timeout; int tcp_fin_timeout; int udp_timeout; }; int main() { int ret = -1; int sockfd = -1; struct ipvs_timeout_t to; sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW); if (sockfd == -1) { printf("socket init error\n"); return -1; } to.tcp_timeout = -2147483647; to.tcp_fin_timeout = -2147483647; to.udp_timeout = -2147483647; ret = setsockopt(sockfd, IPPROTO_IP, IP_VS_SO_SET_TIMEOUT, (char *)(&to), sizeof(to)); printf("setsockopt return %d\n", ret); return ret; } Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'. Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 53ab60baa1ac4f20b080a22c13b77b6373922fd7 ]

There is a UBSAN bug report as below:
UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21
signed integer overflow:
-2147483647 * 1000 cannot be represented in type 'int'

Reproduce program:
	#include <stdio.h>
	#include <sys/types.h>
	#include <sys/socket.h>

	#define IPPROTO_IP 0
	#define IPPROTO_RAW 255

	#define IP_VS_BASE_CTL		(64+1024+64)
	#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)

	/* The argument to IP_VS_SO_GET_TIMEOUT */
	struct ipvs_timeout_t {
		int tcp_timeout;
		int tcp_fin_timeout;
		int udp_timeout;
	};

	int main() {
		int ret = -1;
		int sockfd = -1;
		struct ipvs_timeout_t to;

		sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW);
		if (sockfd == -1) {
			printf("socket init error\n");
			return -1;
		}

		to.tcp_timeout = -2147483647;
		to.tcp_fin_timeout = -2147483647;
		to.udp_timeout = -2147483647;

		ret = setsockopt(sockfd,
				 IPPROTO_IP,
				 IP_VS_SO_SET_TIMEOUT,
				 (char *)(&to),
				 sizeof(to));

		printf("setsockopt return %d\n", ret);
		return ret;
	}

Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'.

Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: nf_tables: fix flush after rule deletion in the same batch 2019-02-27T09:07:03+00:00 Pablo Neira Ayuso pablo@netfilter.org 2019-02-15T11:50:24+00:00 deba234596ead92e6d65de42fa5345e3e02d73dc commit 23b7ca4f745f21c2b9cfcb67fdd33733b3ae7e66 upstream. Flush after rule deletion bogusly hits -ENOENT. Skip rules that have been already from nft_delrule_by_chain() which is always called from the flush path. Fixes: cf9dc09d0949 ("netfilter: nf_tables: fix missing rules flushing per table") Reported-by: Phil Sutter <phil@nwl.cc> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 23b7ca4f745f21c2b9cfcb67fdd33733b3ae7e66 upstream.

Flush after rule deletion bogusly hits -ENOENT. Skip rules that have
been already from nft_delrule_by_chain() which is always called from the
flush path.

Fixes: cf9dc09d0949 ("netfilter: nf_tables: fix missing rules flushing per table")
Reported-by: Phil Sutter <phil@nwl.cc>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netfilter: nf_tables: fix mismatch in big-endian system 2019-02-20T09:18:34+00:00 Liping Zhang zlpnobody@gmail.com 2017-03-08T14:54:18+00:00 1894d7cb6997c906ec3108e49944e35b084141fa commit 10596608c4d62cb8c1c2b806debcbd32fe657e71 upstream. Currently, there are two different methods to store an u16 integer to the u32 data register. For example: u32 *dest = &regs->data[priv->dreg]; 1. *dest = 0; *(u16 *) dest = val_u16; 2. *dest = val_u16; For method 1, the u16 value will be stored like this, either in big-endian or little-endian system: 0 15 31 +-+-+-+-+-+-+-+-+-+-+-+-+ | Value | 0 | +-+-+-+-+-+-+-+-+-+-+-+-+ For method 2, in little-endian system, the u16 value will be the same as listed above. But in big-endian system, the u16 value will be stored like this: 0 15 31 +-+-+-+-+-+-+-+-+-+-+-+-+ | 0 | Value | +-+-+-+-+-+-+-+-+-+-+-+-+ So later we use "memcmp(&regs->data[priv->sreg], data, 2);" to do compare in nft_cmp, nft_lookup expr ..., method 2 will get the wrong result in big-endian system, as 0~15 bits will always be zero. For the similar reason, when loading an u16 value from the u32 data register, we should use "*(u16 *) sreg;" instead of "(u16)*sreg;", the 2nd method will get the wrong value in the big-endian system. So introduce some wrapper functions to store/load an u8 or u16 integer to/from the u32 data register, and use them in the right place. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 10596608c4d62cb8c1c2b806debcbd32fe657e71 upstream.

Currently, there are two different methods to store an u16 integer to
the u32 data register. For example:
  u32 *dest = &regs->data[priv->dreg];
  1. *dest = 0; *(u16 *) dest = val_u16;
  2. *dest = val_u16;

For method 1, the u16 value will be stored like this, either in
big-endian or little-endian system:
  0          15           31
  +-+-+-+-+-+-+-+-+-+-+-+-+
  |   Value   |     0     |
  +-+-+-+-+-+-+-+-+-+-+-+-+

For method 2, in little-endian system, the u16 value will be the same
as listed above. But in big-endian system, the u16 value will be stored
like this:
  0          15           31
  +-+-+-+-+-+-+-+-+-+-+-+-+
  |     0     |   Value   |
  +-+-+-+-+-+-+-+-+-+-+-+-+

So later we use "memcmp(&regs->data[priv->sreg], data, 2);" to do
compare in nft_cmp, nft_lookup expr ..., method 2 will get the wrong
result in big-endian system, as 0~15 bits will always be zero.

For the similar reason, when loading an u16 value from the u32 data
register, we should use "*(u16 *) sreg;" instead of "(u16)*sreg;",
the 2nd method will get the wrong value in the big-endian system.

So introduce some wrapper functions to store/load an u8 or u16
integer to/from the u32 data register, and use them in the right
place.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netfilter: ipset: do not call ipset_nest_end after nla_nest_cancel 2019-01-13T09:03:48+00:00 Pan Bian bianpan2016@163.com 2018-12-10T13:39:37+00:00 1231e259d43a85f61bde30fe6548346f961eddc5 [ Upstream commit 708abf74dd87f8640871b814faa195fb5970b0e3 ] In the error handling block, nla_nest_cancel(skb, atd) is called to cancel the nest operation. But then, ipset_nest_end(skb, atd) is unexpected called to end the nest operation. This patch calls the ipset_nest_end only on the branch that nla_nest_cancel is not called. Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 708abf74dd87f8640871b814faa195fb5970b0e3 ]

In the error handling block, nla_nest_cancel(skb, atd) is called to
cancel the nest operation. But then, ipset_nest_end(skb, atd) is
unexpected called to end the nest operation. This patch calls the
ipset_nest_end only on the branch that nla_nest_cancel is not called.

Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: seqadj: re-load tcp header pointer after possible head reallocation 2019-01-13T09:03:48+00:00 Florian Westphal fw@strlen.de 2018-12-05T13:12:19+00:00 d013a1cd9c1d1a4d6ed0377ff328e0b633ab6387 [ Upstream commit 530aad77010b81526586dfc09130ec875cd084e4 ] When adjusting sack block sequence numbers, skb_make_writable() gets called to make sure tcp options are all in the linear area, and buffer is not shared. This can cause tcp header pointer to get reallocated, so we must reaload it to avoid memory corruption. This bug pre-dates git history. Reported-by: Neel Mehta <nmehta@google.com> Reported-by: Shane Huntley <shuntley@google.com> Reported-by: Heather Adkins <argv@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 530aad77010b81526586dfc09130ec875cd084e4 ]

When adjusting sack block sequence numbers, skb_make_writable() gets
called to make sure tcp options are all in the linear area, and buffer
is not shared.

This can cause tcp header pointer to get reallocated, so we must
reaload it to avoid memory corruption.

This bug pre-dates git history.

Reported-by: Neel Mehta <nmehta@google.com>
Reported-by: Shane Huntley <shuntley@google.com>
Reported-by: Heather Adkins <argv@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ipvs: call ip_vs_dst_notifier earlier than ipv6_dev_notf 2018-12-17T08:38:33+00:00 Xin Long lucien.xin@gmail.com 2018-11-15T07:14:30+00:00 3d7eec166f65282c625d95289cb04ee61407ebfe [ Upstream commit 2a31e4bd9ad255ee40809b5c798c4b1c2b09703b ] ip_vs_dst_event is supposed to clean up all dst used in ipvs' destinations when a net dev is going down. But it works only when the dst's dev is the same as the dev from the event. Now with the same priority but late registration, ip_vs_dst_notifier is always called later than ipv6_dev_notf where the dst's dev is set to lo for NETDEV_DOWN event. As the dst's dev lo is not the same as the dev from the event in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work. Also as these dst have to wait for dest_trash_timer to clean them up. It would cause some non-permanent kernel warnings: unregister_netdevice: waiting for br0 to become free. Usage count = 3 To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5. Note that for ipv4 route fib_netdev_notifier doesn't set dst's dev to lo in NETDEV_DOWN event, so this fix is only needed when IP_VS_IPV6 is defined. Fixes: 7a4f0761fce3 ("IPVS: init and cleanup restructuring") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2a31e4bd9ad255ee40809b5c798c4b1c2b09703b ]

ip_vs_dst_event is supposed to clean up all dst used in ipvs'
destinations when a net dev is going down. But it works only
when the dst's dev is the same as the dev from the event.

Now with the same priority but late registration,
ip_vs_dst_notifier is always called later than ipv6_dev_notf
where the dst's dev is set to lo for NETDEV_DOWN event.

As the dst's dev lo is not the same as the dev from the event
in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work.
Also as these dst have to wait for dest_trash_timer to clean
them up. It would cause some non-permanent kernel warnings:

  unregister_netdevice: waiting for br0 to become free. Usage count = 3

To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf
by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5.

Note that for ipv4 route fib_netdev_notifier doesn't set dst's
dev to lo in NETDEV_DOWN event, so this fix is only needed when
IP_VS_IPV6 is defined.

Fixes: 7a4f0761fce3 ("IPVS: init and cleanup restructuring")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: xt_IDLETIMER: add sysfs filename checking routine 2018-11-27T15:09:39+00:00 Taehee Yoo ap420073@gmail.com 2018-10-20T15:00:08+00:00 f184d303d10df3d79a0b68b5d5d983ffe8f5b760 [ Upstream commit 54451f60c8fa061af9051a53be9786393947367c ] When IDLETIMER rule is added, sysfs file is created under /sys/class/xt_idletimer/timers/ But some label name shouldn't be used. ".", "..", "power", "uevent", "subsystem", etc... So that sysfs filename checking routine is needed. test commands: %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power" splat looks like: [95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power' [95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20 [95765.449755] Call Trace: [95765.449755] dump_stack+0xc9/0x16b [95765.449755] ? show_regs_print_info+0x5/0x5 [95765.449755] sysfs_warn_dup+0x74/0x90 [95765.449755] sysfs_add_file_mode_ns+0x352/0x500 [95765.449755] sysfs_create_file_ns+0x179/0x270 [95765.449755] ? sysfs_add_file_mode_ns+0x500/0x500 [95765.449755] ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER] [95765.449755] ? rcu_read_lock_sched_held+0x114/0x130 [95765.449755] ? __kmalloc_track_caller+0x211/0x2b0 [95765.449755] ? memcpy+0x34/0x50 [95765.449755] idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER] [ ... ] Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 54451f60c8fa061af9051a53be9786393947367c ]

When IDLETIMER rule is added, sysfs file is created under
/sys/class/xt_idletimer/timers/
But some label name shouldn't be used.
".", "..", "power", "uevent", "subsystem", etc...
So that sysfs filename checking routine is needed.

test commands:
   %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power"

splat looks like:
[95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power'
[95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20
[95765.449755] Call Trace:
[95765.449755]  dump_stack+0xc9/0x16b
[95765.449755]  ? show_regs_print_info+0x5/0x5
[95765.449755]  sysfs_warn_dup+0x74/0x90
[95765.449755]  sysfs_add_file_mode_ns+0x352/0x500
[95765.449755]  sysfs_create_file_ns+0x179/0x270
[95765.449755]  ? sysfs_add_file_mode_ns+0x500/0x500
[95765.449755]  ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER]
[95765.449755]  ? rcu_read_lock_sched_held+0x114/0x130
[95765.449755]  ? __kmalloc_track_caller+0x211/0x2b0
[95765.449755]  ? memcpy+0x34/0x50
[95765.449755]  idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER]
[ ... ]

Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net 2018-11-27T15:09:39+00:00 Eric Westbrook eric@westbrook.io 2018-08-28T21:14:42+00:00 919560afc21f91ca352a20394d5249aba1799690 [ Upstream commit 886503f34d63e681662057448819edb5b1057a97 ] Allow /0 as advertised for hash:net,port,net sets. For "hash:net,port,net", ipset(8) says that "either subnet is permitted to be a /0 should you wish to match port between all destinations." Make that statement true. Before: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid After: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 # ipset test cidrzero 192.168.205.129,12345,172.16.205.129 192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero. # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 # ipset test cidrzero6 fe80::1,12345,ff00::1 fe80::1,tcp:12345,ff00::1 is in set cidrzero6. See also: https://bugzilla.kernel.org/show_bug.cgi?id=200897 https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9c Signed-off-by: Eric Westbrook <linux@westbrook.io> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 886503f34d63e681662057448819edb5b1057a97 ]

Allow /0 as advertised for hash:net,port,net sets.

For "hash:net,port,net", ipset(8) says that "either subnet
is permitted to be a /0 should you wish to match port
between all destinations."

Make that statement true.

Before:

    # ipset create cidrzero hash:net,port,net
    # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
    ipset v6.34: The value of the CIDR parameter of the IP address is invalid

    # ipset create cidrzero6 hash:net,port,net family inet6
    # ipset add cidrzero6 ::/0,12345,::/0
    ipset v6.34: The value of the CIDR parameter of the IP address is invalid

After:

    # ipset create cidrzero hash:net,port,net
    # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
    # ipset test cidrzero 192.168.205.129,12345,172.16.205.129
    192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero.

    # ipset create cidrzero6 hash:net,port,net family inet6
    # ipset add cidrzero6 ::/0,12345,::/0
    # ipset test cidrzero6 fe80::1,12345,ff00::1
    fe80::1,tcp:12345,ff00::1 is in set cidrzero6.

See also:

  https://bugzilla.kernel.org/show_bug.cgi?id=200897
  https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9c

Signed-off-by: Eric Westbrook <linux@westbrook.io>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: conntrack: fix calculation of next bucket number in early_drop 2018-11-21T08:26:00+00:00 Vasily Khoruzhick vasilykh@arista.com 2018-10-25T19:15:43+00:00 7e1e1956dcc7c391ca48a4c278b56134ea47b7e9 commit f393808dc64149ccd0e5a8427505ba2974a59854 upstream. If there's no entry to drop in bucket that corresponds to the hash, early_drop() should look for it in other buckets. But since it increments hash instead of bucket number, it actually looks in the same bucket 8 times: hsize is 16k by default (14 bits) and hash is 32-bit value, so reciprocal_scale(hash, hsize) returns the same value for hash..hash+7 in most cases. Fix it by increasing bucket number instead of hash and rename _hash to bucket to avoid future confusion. Fixes: 3e86638e9a0b ("netfilter: conntrack: consider ct netns in early_drop logic") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f393808dc64149ccd0e5a8427505ba2974a59854 upstream.

If there's no entry to drop in bucket that corresponds to the hash,
early_drop() should look for it in other buckets. But since it increments
hash instead of bucket number, it actually looks in the same bucket 8
times: hsize is 16k by default (14 bits) and hash is 32-bit value, so
reciprocal_scale(hash, hsize) returns the same value for hash..hash+7 in
most cases.

Fix it by increasing bucket number instead of hash and rename _hash
to bucket to avoid future confusion.

Fixes: 3e86638e9a0b ("netfilter: conntrack: consider ct netns in early_drop logic")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>