linux-stable.git/net/netfilter, branch v4.19.30

netfilter: xt_TEE: add missing code to get interface index in checkentry.

2019-03-13T21:02:40+00:00

[ Upstream commit 18c0ab87364ac5128a152055fdcb1d27e01caf01 ]

checkentry(tee_tg_check) should initialize priv->oif from dev if possible.
But only netdevice notifier handler can set that.
Hence priv->oif is always -1 until notifier handler is called.

Fixes: 9e2f6c5d78db ("netfilter: Rework xt_TEE netdevice notifier")
Signed-off-by: Taehee Yoo 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

netfilter: xt_TEE: fix wrong interface selection

2019-03-13T21:02:40+00:00

[ Upstream commit f24d2d4f9586985509320f90308723d3d0c4e47f ]

TEE netdevice notifier handler checks only interface name. however
each netns can have same interface name. hence other netns's interface
could be selected.

test commands:
   %ip netns add vm1
   %iptables -I INPUT -p icmp -j TEE --gateway 192.168.1.1 --oif enp2s0
   %ip link set enp2s0 netns vm1

Above rule is in the root netns. but that rule could get enp2s0
ifindex of vm1 by notifier handler.

After this patch, TEE rule is added to the per-netns list.

Fixes: 9e2f6c5d78db ("netfilter: Rework xt_TEE netdevice notifier")
Signed-off-by: Taehee Yoo 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

netfilter: nf_nat: skip nat clash resolution for same-origin entries

2019-03-13T21:02:37+00:00

[ Upstream commit 4e35c1cb9460240e983a01745b5f29fe3a4d8e39 ]

It is possible that two concurrent packets originating from the same
socket of a connection-less protocol (e.g. UDP) can end up having
different IP_CT_DIR_REPLY tuples which results in one of the packets
being dropped.

To illustrate this, consider the following simplified scenario:

1. Packet A and B are sent at the same time from two different threads
   by same UDP socket.  No matching conntrack entry exists yet.
   Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A.  No clashing entry found.
   conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply
   tuple of B is already taken by A.
   It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table
   because its ORIGINAL direction is clashing with A and the REPLY
   directions of A and B are not the same anymore due to UDP source
   port reallocation done in step 3.

This patch modifies nf_conntrack_tuple_taken so it doesn't consider
colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.

[ Florian: simplify patch to not use .allow_clash setting
  and always ignore identical flows ]

Signed-off-by: Martynas Pumputis 
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

ipvs: Fix signed integer overflow when setsockopt timeout

2019-03-13T21:02:27+00:00

[ Upstream commit 53ab60baa1ac4f20b080a22c13b77b6373922fd7 ]

There is a UBSAN bug report as below:
UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21
signed integer overflow:
-2147483647 * 1000 cannot be represented in type 'int'

Reproduce program:
	#include 
	#include 
	#include 

	#define IPPROTO_IP 0
	#define IPPROTO_RAW 255

	#define IP_VS_BASE_CTL		(64+1024+64)
	#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)

	/* The argument to IP_VS_SO_GET_TIMEOUT */
	struct ipvs_timeout_t {
		int tcp_timeout;
		int tcp_fin_timeout;
		int udp_timeout;
	};

	int main() {
		int ret = -1;
		int sockfd = -1;
		struct ipvs_timeout_t to;

		sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW);
		if (sockfd == -1) {
			printf("socket init error\n");
			return -1;
		}

		to.tcp_timeout = -2147483647;
		to.tcp_fin_timeout = -2147483647;
		to.udp_timeout = -2147483647;

		ret = setsockopt(sockfd,
				 IPPROTO_IP,
				 IP_VS_SO_SET_TIMEOUT,
				 (char *)(&to),
				 sizeof(to));

		printf("setsockopt return %d\n", ret);
		return ret;
	}

Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'.

Signed-off-by: ZhangXiaoxu 
Acked-by: Simon Horman 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

netfilter: nfnetlink_osf: add missing fmatch check

2019-02-27T09:09:03+00:00

commit 1a6a0951fc009f6d9fe8ebea2d2417d80d54097b upstream.

When we check the tcp options of a packet and it doesn't match the current
fingerprint, the tcp packet option pointer must be restored to its initial
value in order to do the proper tcp options check for the next fingerprint.

Here we can see an example.
Assumming the following fingerprint base with two lines:

S10:64:1:60:M*,S,T,N,W6:      Linux:3.0::Linux 3.0
S20:64:1:60:M*,S,T,N,W7:      Linux:4.19:arch:Linux 4.1

Where TCP options are the last field in the OS signature, all of them overlap
except by the last one, ie. 'W6' versus 'W7'.

In case a packet for Linux 4.19 kicks in, the osf finds no matching because the
TCP options pointer is updated after checking for the TCP options in the first
line.

Therefore, reset pointer back to where it should be.

Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Signed-off-by: Fernando Fernandez Mancera 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

netfilter: nft_compat: use-after-free when deleting targets

2019-02-27T09:09:03+00:00

commit 753c111f655e38bbd52fc01321266633f022ebe2 upstream.

Fetch pointer to module before target object is released.

Fixes: 29e3880109e3 ("netfilter: nf_tables: fix use-after-free when deleting compat expressions")
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

netfilter: nf_tables: fix flush after rule deletion in the same batch

2019-02-27T09:09:02+00:00

commit 23b7ca4f745f21c2b9cfcb67fdd33733b3ae7e66 upstream.

Flush after rule deletion bogusly hits -ENOENT. Skip rules that have
been already from nft_delrule_by_chain() which is always called from the
flush path.

Fixes: cf9dc09d0949 ("netfilter: nf_tables: fix missing rules flushing per table")
Reported-by: Phil Sutter 
Acked-by: Phil Sutter 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

netfilter: nft_flow_offload: fix checking method of conntrack helper

2019-02-27T09:08:55+00:00

[ Upstream commit 2314e879747e82896f51cce4488f6a00f3e1af7b ]

This patch uses nfct_help() to detect whether an established connection
needs conntrack helper instead of using test_bit(IPS_HELPER_BIT,
&ct->status).

The reason is that IPS_HELPER_BIT is only set when using explicit CT
target.

However, in the case that a device enables conntrack helper via command
"echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of
IPS_HELPER_BIT will not present any change, and consequently it loses
the checking ability in the context.

Signed-off-by: Henry Yen 
Reviewed-by: Ryder Lee 
Tested-by: John Crispin 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

netfilter: nft_flow_offload: fix interaction with vrf slave device

2019-02-27T09:08:54+00:00

[ Upstream commit 10f4e765879e514e1ce7f52ed26603047af196e2 ]

In the forward chain, the iif is changed from slave device to master vrf
device. Thus, flow offload does not find a match on the lower slave
device.

This patch uses the cached route, ie. dst->dev, to update the iif and
oif fields in the flow entry.

After this patch, the following example works fine:

 # ip addr add dev eth0 1.1.1.1/24
 # ip addr add dev eth1 10.0.0.1/24
 # ip link add user1 type vrf table 1
 # ip l set user1 up
 # ip l set dev eth0 master user1
 # ip l set dev eth1 master user1

 # nft add table firewall
 # nft add flowtable f fb1 { hook ingress priority 0 \; devices = { eth0, eth1 } \; }
 # nft add chain f ftb-all {type filter hook forward priority 0 \; policy accept \; }
 # nft add rule f ftb-all ct zone 1 ip protocol tcp flow offload @fb1
 # nft add rule f ftb-all ct zone 1 ip protocol udp flow offload @fb1

Signed-off-by: wenxu 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

netfilter: nft_flow_offload: Fix reverse route lookup

2019-02-27T09:08:53+00:00

[ Upstream commit a799aea0988ea0d1b1f263e996fdad2f6133c680 ]

Using the following example:

	client 1.1.1.7 ---> 2.2.2.7 which dnat to 10.0.0.7 server

The first reply packet (ie. syn+ack) uses an incorrect destination
address for the reverse route lookup since it uses:

	daddr = ct->tuplehash[!dir].tuple.dst.u3.ip;

which is 2.2.2.7 in the scenario that is described above, while this
should be:

	daddr = ct->tuplehash[dir].tuple.src.u3.ip;

that is 10.0.0.7.

Signed-off-by: wenxu 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin