linux-stable.git/net/netfilter, branch v4.14.2 Linux kernel stable tree Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-11-03T16:09:21+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-03T16:09:21+00:00 7ba3ebff9c09fa461e7c2d186b81f7af61910abe Pull networking fixes from David Miller: "Hopefully this is the last batch of networking fixes for 4.14 Fingers crossed... 1) Fix stmmac to use the proper sized OF property read, from Bhadram Varka. 2) Fix use after free in net scheduler tc action code, from Cong Wang. 3) Fix SKB control block mangling in tcp_make_synack(). 4) Use proper locking in fib_dump_info(), from Florian Westphal. 5) Fix IPG encodings in systemport driver, from Florian Fainelli. 6) Fix division by zero in NV TCP congestion control module, from Konstantin Khlebnikov. 7) Fix use after free in nf_reject_ipv4, from Tejaswi Tanikella" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: systemport: Correct IPG length settings tcp: do not mangle skb->cb[] in tcp_make_synack() fib: fib_dump_info can no longer use __in_dev_get_rtnl stmmac: use of_property_read_u32 instead of read_u8 net_sched: hold netns refcnt for each action net_sched: acquire RTNL in tc_action_net_exit() net: vrf: correct FRA_L3MDEV encode type tcp_nv: fix division by zero in tcpnv_acked() netfilter: nf_reject_ipv4: Fix use-after-free in send_reset netfilter: nft_set_hash: disable fast_ops for 2-len keys 
Pull networking fixes from David Miller:
 "Hopefully this is the last batch of networking fixes for 4.14

  Fingers crossed...

   1) Fix stmmac to use the proper sized OF property read, from Bhadram
      Varka.

   2) Fix use after free in net scheduler tc action code, from Cong
      Wang.

   3) Fix SKB control block mangling in tcp_make_synack().

   4) Use proper locking in fib_dump_info(), from Florian Westphal.

   5) Fix IPG encodings in systemport driver, from Florian Fainelli.

   6) Fix division by zero in NV TCP congestion control module, from
      Konstantin Khlebnikov.

   7) Fix use after free in nf_reject_ipv4, from Tejaswi Tanikella"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: systemport: Correct IPG length settings
  tcp: do not mangle skb->cb[] in tcp_make_synack()
  fib: fib_dump_info can no longer use __in_dev_get_rtnl
  stmmac: use of_property_read_u32 instead of read_u8
  net_sched: hold netns refcnt for each action
  net_sched: acquire RTNL in tc_action_net_exit()
  net: vrf: correct FRA_L3MDEV encode type
  tcp_nv: fix division by zero in tcpnv_acked()
  netfilter: nf_reject_ipv4: Fix use-after-free in send_reset
  netfilter: nft_set_hash: disable fast_ops for 2-len keys
License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02T10:10:55+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-01T14:07:57+00:00 b24413180f5600bcb3bb70fbed5cf186b60864bd Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netfilter: nft_set_hash: disable fast_ops for 2-len keys 2017-10-25T12:46:44+00:00 Anatole Denis anatole@rezel.net 2017-10-04T00:17:14+00:00 0414c78f14861cb704d6e6888efd53dd36e3bdde jhash_1word of a u16 is a different value from jhash of the same u16 with length 2. Since elements are always inserted in sets using jhash over the actual klen, this would lead to incorrect lookups on fixed-size sets with a key length of 2, as they would be inserted with hash value jhash(key, 2) and looked up with hash value jhash_1word(key), which is different. Example reproducer(v4.13+), using anonymous sets which always have a fixed size: table inet t { chain c { type filter hook output priority 0; policy accept; tcp dport { 10001, 10003, 10005, 10007, 10009 } counter packets 4 bytes 240 reject tcp dport 10001 counter packets 4 bytes 240 reject tcp dport 10003 counter packets 4 bytes 240 reject tcp dport 10005 counter packets 4 bytes 240 reject tcp dport 10007 counter packets 0 bytes 0 reject tcp dport 10009 counter packets 4 bytes 240 reject } } then use nc -z localhost <port> to probe; incorrectly hashed ports will pass through the set lookup and increment the counter of an individual rule. jhash being seeded with a random value, it is not deterministic which ports will incorrectly hash, but in testing with 5 ports in the set I always had 4 or 5 with an incorrect hash value. Signed-off-by: Anatole Denis <anatole@rezel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
jhash_1word of a u16 is a different value from jhash of the same u16 with
length 2.
Since elements are always inserted in sets using jhash over the actual
klen, this would lead to incorrect lookups on fixed-size sets with a key
length of 2, as they would be inserted with hash value jhash(key, 2) and
looked up with hash value jhash_1word(key), which is different.

Example reproducer(v4.13+), using anonymous sets which always have a
fixed size:

  table inet t {
      chain c {
                  type filter hook output priority 0; policy accept;
                  tcp dport { 10001, 10003, 10005, 10007, 10009 } counter packets 4 bytes 240 reject
                  tcp dport 10001 counter packets 4 bytes 240 reject
                  tcp dport 10003 counter packets 4 bytes 240 reject
                  tcp dport 10005 counter packets 4 bytes 240 reject
                  tcp dport 10007 counter packets 0 bytes 0 reject
                  tcp dport 10009 counter packets 4 bytes 240 reject
          }
  }

then use nc -z localhost <port> to probe; incorrectly hashed ports will
pass through the set lookup and increment the counter of an individual
rule.

jhash being seeded with a random value, it is not deterministic which
ports will incorrectly hash, but in testing with 5 ports in the set I
always had 4 or 5 with an incorrect hash value.

Signed-off-by: Anatole Denis <anatole@rezel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1' 2017-10-09T13:18:04+00:00 Shmulik Ladkani shmulik.ladkani@gmail.com 2017-10-09T12:27:15+00:00 98589a0998b8b13c4a8fa1ccb0e62751a019faa5 Commit 2c16d6033264 ("netfilter: xt_bpf: support ebpf") introduced support for attaching an eBPF object by an fd, with the 'bpf_mt_check_v1' ABI expecting the '.fd' to be specified upon each IPT_SO_SET_REPLACE call. However this breaks subsequent iptables calls: # iptables -A INPUT -m bpf --object-pinned /sys/fs/bpf/xxx -j ACCEPT # iptables -A INPUT -s 5.6.7.8 -j ACCEPT iptables: Invalid argument. Run `dmesg' for more information. That's because iptables works by loading existing rules using IPT_SO_GET_ENTRIES to userspace, then issuing IPT_SO_SET_REPLACE with the replacement set. However, the loaded 'xt_bpf_info_v1' has an arbitrary '.fd' number (from the initial "iptables -m bpf" invocation) - so when 2nd invocation occurs, userspace passes a bogus fd number, which leads to 'bpf_mt_check_v1' to fail. One suggested solution [1] was to hack iptables userspace, to perform a "entries fixup" immediatley after IPT_SO_GET_ENTRIES, by opening a new, process-local fd per every 'xt_bpf_info_v1' entry seen. However, in [2] both Pablo Neira Ayuso and Willem de Bruijn suggested to depricate the xt_bpf_info_v1 ABI dealing with pinned ebpf objects. This fix changes the XT_BPF_MODE_FD_PINNED behavior to ignore the given '.fd' and instead perform an in-kernel lookup for the bpf object given the provided '.path'. It also defines an alias for the XT_BPF_MODE_FD_PINNED mode, named XT_BPF_MODE_PATH_PINNED, to better reflect the fact that the user is expected to provide the path of the pinned object. Existing XT_BPF_MODE_FD_ELF behavior (non-pinned fd mode) is preserved. References: [1] https://marc.info/?l=netfilter-devel&m=150564724607440&w=2 [2] https://marc.info/?l=netfilter-devel&m=150575727129880&w=2 Reported-by: Rafael Buchbinder <rafi@rbk.ms> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
Commit 2c16d6033264 ("netfilter: xt_bpf: support ebpf") introduced
support for attaching an eBPF object by an fd, with the
'bpf_mt_check_v1' ABI expecting the '.fd' to be specified upon each
IPT_SO_SET_REPLACE call.

However this breaks subsequent iptables calls:

 # iptables -A INPUT -m bpf --object-pinned /sys/fs/bpf/xxx -j ACCEPT
 # iptables -A INPUT -s 5.6.7.8 -j ACCEPT
 iptables: Invalid argument. Run `dmesg' for more information.

That's because iptables works by loading existing rules using
IPT_SO_GET_ENTRIES to userspace, then issuing IPT_SO_SET_REPLACE with
the replacement set.

However, the loaded 'xt_bpf_info_v1' has an arbitrary '.fd' number
(from the initial "iptables -m bpf" invocation) - so when 2nd invocation
occurs, userspace passes a bogus fd number, which leads to
'bpf_mt_check_v1' to fail.

One suggested solution [1] was to hack iptables userspace, to perform a
"entries fixup" immediatley after IPT_SO_GET_ENTRIES, by opening a new,
process-local fd per every 'xt_bpf_info_v1' entry seen.

However, in [2] both Pablo Neira Ayuso and Willem de Bruijn suggested to
depricate the xt_bpf_info_v1 ABI dealing with pinned ebpf objects.

This fix changes the XT_BPF_MODE_FD_PINNED behavior to ignore the given
'.fd' and instead perform an in-kernel lookup for the bpf object given
the provided '.path'.

It also defines an alias for the XT_BPF_MODE_FD_PINNED mode, named
XT_BPF_MODE_PATH_PINNED, to better reflect the fact that the user is
expected to provide the path of the pinned object.

Existing XT_BPF_MODE_FD_ELF behavior (non-pinned fd mode) is preserved.

References: [1] https://marc.info/?l=netfilter-devel&m=150564724607440&w=2
            [2] https://marc.info/?l=netfilter-devel&m=150575727129880&w=2

Reported-by: Rafael Buchbinder <rafi@rbk.ms>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: x_tables: avoid stack-out-of-bounds read in xt_copy_counters_from_user 2017-10-06T13:04:05+00:00 Eric Dumazet edumazet@google.com 2017-10-05T09:50:07+00:00 e466af75c074e76107ae1cd5a2823e9c61894ffb syzkaller reports an out of bound read in strlcpy(), triggered by xt_copy_counters_from_user() Fix this by using memcpy(), then forcing a zero byte at the last position of the destination, as Florian did for the non COMPAT code. Fixes: d7591f0c41ce ("netfilter: x_tables: introduce and use xt_copy_counters_from_user") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
syzkaller reports an out of bound read in strlcpy(), triggered
by xt_copy_counters_from_user()

Fix this by using memcpy(), then forcing a zero byte at the last position
of the destination, as Florian did for the non COMPAT code.

Fixes: d7591f0c41ce ("netfilter: x_tables: introduce and use xt_copy_counters_from_user")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: do not dump chain counters if not enabled 2017-10-06T12:49:19+00:00 Pablo Neira Ayuso pablo@netfilter.org 2017-10-04T15:18:27+00:00 5f9bfe0ef622a7bb9707c22ceb4b6451e1e2cb7b Chain counters are only enabled on demand since 9f08ea848117, skip them when dumping them via netlink. Fixes: 9f08ea848117 ("netfilter: nf_tables: keep chain counters away from hot path") Reported-by: Johny Mattsson <johny.mattsson+kernel@gmail.com> Tested-by: Johny Mattsson <johny.mattsson+kernel@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
Chain counters are only enabled on demand since 9f08ea848117, skip them
when dumping them via netlink.

Fixes: 9f08ea848117 ("netfilter: nf_tables: keep chain counters away from hot path")
Reported-by: Johny Mattsson <johny.mattsson+kernel@gmail.com>
Tested-by: Johny Mattsson <johny.mattsson+kernel@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: Release memory obtained by kasprintf 2017-10-03T13:21:19+00:00 Arvind Yadav arvind.yadav.cs@gmail.com 2017-09-20T07:01:28+00:00 e63aaaa6be54c956b9603590ea436b003407bb3e Free memory region, if nf_tables_set_alloc_name is not successful. Fixes: 387454901bd6 ("netfilter: nf_tables: Allow set names of up to 255 chars") Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
Free memory region, if nf_tables_set_alloc_name is not successful.

Fixes: 387454901bd6 ("netfilter: nf_tables: Allow set names of up to 255 chars")
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: fix update chain error 2017-09-29T11:34:36+00:00 JingPiao Chen chenjingpiao@gmail.com 2017-09-23T09:10:44+00:00 0d18779be13766b33c69cbc26df38383598da373 # nft add table filter # nft add chain filter c1 # nft rename chain filter c1 c2 Error: Could not process rule: No such file or directory rename chain filter c1 c2 ^^^^^^^^^^^^^^^^^^^^^^^^^^ # nft add chain filter c2 # nft rename chain filter c1 c2 # nft list table filter table ip filter { chain c2 { } chain c2 { } } Fixes: 664b0f8cd8 ("netfilter: nf_tables: add generation mask to chains") Signed-off-by: JingPiao Chen <chenjingpiao@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
 # nft add table filter
 # nft add chain filter c1
 # nft rename chain filter c1 c2

Error: Could not process rule: No such file or directory
rename chain filter c1 c2
^^^^^^^^^^^^^^^^^^^^^^^^^^

 # nft add chain filter c2
 # nft rename chain filter c1 c2
 # nft list table filter

table ip filter {
	chain c2 {
	}

	chain c2 {
	}
}

Fixes: 664b0f8cd8 ("netfilter: nf_tables: add generation mask to chains")
Signed-off-by: JingPiao Chen <chenjingpiao@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: ipset: Fix race between dump and swap 2017-09-29T10:15:14+00:00 Ross Lagerwall ross.lagerwall@citrix.com 2017-09-27T09:06:27+00:00 e5173418ac597cebe9f7a39adf10be470000b518 Fix a race between ip_set_dump_start() and ip_set_swap(). The race is as follows: * Without holding the ref lock, ip_set_swap() checks ref_netlink of the set and it is 0. * ip_set_dump_start() takes a reference on the set. * ip_set_swap() does the swap (even though it now has a non-zero reference count). * ip_set_dump_start() gets the set from ip_set_list again which is now a different set since it has been swapped. * ip_set_dump_start() calls __ip_set_put_netlink() and hits a BUG_ON due to the reference count being 0. Fix this race by extending the critical region in which the ref lock is held to include checking the ref counts. The race can be reproduced with the following script: while :; do ipset destroy hash_ip1 ipset destroy hash_ip2 ipset create hash_ip1 hash:ip family inet hashsize 1024 \ maxelem 500000 ipset create hash_ip2 hash:ip family inet hashsize 300000 \ maxelem 500000 ipset create hash_ip3 hash:ip family inet hashsize 1024 \ maxelem 500000 ipset save & ipset swap hash_ip3 hash_ip2 ipset destroy hash_ip3 wait done Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
Fix a race between ip_set_dump_start() and ip_set_swap().
The race is as follows:
* Without holding the ref lock, ip_set_swap() checks ref_netlink of the
  set and it is 0.
* ip_set_dump_start() takes a reference on the set.
* ip_set_swap() does the swap (even though it now has a non-zero
  reference count).
* ip_set_dump_start() gets the set from ip_set_list again which is now a
  different set since it has been swapped.
* ip_set_dump_start() calls __ip_set_put_netlink() and hits a BUG_ON due
  to the reference count being 0.

Fix this race by extending the critical region in which the ref lock is
held to include checking the ref counts.

The race can be reproduced with the following script:
  while :; do
    ipset destroy hash_ip1
    ipset destroy hash_ip2
    ipset create hash_ip1 hash:ip family inet hashsize 1024 \
        maxelem 500000
    ipset create hash_ip2 hash:ip family inet hashsize 300000 \
        maxelem 500000
    ipset create hash_ip3 hash:ip family inet hashsize 1024 \
        maxelem 500000
    ipset save &
    ipset swap hash_ip3 hash_ip2
    ipset destroy hash_ip3
    wait
  done

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: ipset: pernet ops must be unregistered last 2017-09-26T18:15:17+00:00 Florian Westphal fw@strlen.de 2017-09-26T09:57:54+00:00 e23ed762db7ed1950a6408c3be80bc56909ab3d4 Removing the ipset module leaves a small window where one cpu performs module removal while another runs a command like 'ipset flush'. ipset uses net_generic(), unregistering the pernet ops frees this storage area. Fix it by first removing the user-visible api handlers and the pernet ops last. Fixes: 1785e8f473082 ("netfiler: ipset: Add net namespace for ipset") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
Removing the ipset module leaves a small window where one cpu performs
module removal while another runs a command like 'ipset flush'.

ipset uses net_generic(), unregistering the pernet ops frees this
storage area.

Fix it by first removing the user-visible api handlers and the pernet
ops last.

Fixes: 1785e8f473082 ("netfiler: ipset: Add net namespace for ipset")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>