linux-stable.git/net/mpls, branch linux-4.6.y

mpls: find_outdev: check for err ptr in addition to NULL check

2016-04-08T16:43:20+00:00

find_outdev calls inet{,6}_fib_lookup_dev() or dev_get_by_index() to
find the output device. In case of an error, inet{,6}_fib_lookup_dev()
returns error pointer and dev_get_by_index() returns NULL. But the function
only checks for NULL and thus can end up calling dev_put on an ERR_PTR.
This patch adds an additional check for err ptr after the NULL check.

Before: Trying to add an mpls route with no oif from user, no available
path to 10.1.1.8 and no default route:
$ip -f mpls route add 100 as 200 via inet 10.1.1.8
[  822.337195] BUG: unable to handle kernel NULL pointer dereference at
00000000000003a3
[  822.340033] IP: [] mpls_nh_assign_dev+0x10b/0x182
[  822.340033] PGD 1db38067 PUD 1de9e067 PMD 0
[  822.340033] Oops: 0000 [#1] SMP
[  822.340033] Modules linked in:
[  822.340033] CPU: 0 PID: 11148 Comm: ip Not tainted 4.5.0-rc7+ #54
[  822.340033] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org
04/01/2014
[  822.340033] task: ffff88001db82580 ti: ffff88001dad4000 task.ti:
ffff88001dad4000
[  822.340033] RIP: 0010:[]  []
mpls_nh_assign_dev+0x10b/0x182
[  822.340033] RSP: 0018:ffff88001dad7a88  EFLAGS: 00010282
[  822.340033] RAX: ffffffffffffff9b RBX: ffffffffffffff9b RCX:
0000000000000002
[  822.340033] RDX: 00000000ffffff9b RSI: 0000000000000008 RDI:
0000000000000000
[  822.340033] RBP: ffff88001ddc9ea0 R08: ffff88001e9f1768 R09:
0000000000000000
[  822.340033] R10: ffff88001d9c1100 R11: ffff88001e3c89f0 R12:
ffffffff8187e0c0
[  822.340033] R13: ffffffff8187e0c0 R14: ffff88001ddc9e80 R15:
0000000000000004
[  822.340033] FS:  00007ff9ed798700(0000) GS:ffff88001fc00000(0000)
knlGS:0000000000000000
[  822.340033] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  822.340033] CR2: 00000000000003a3 CR3: 000000001de89000 CR4:
00000000000006f0
[  822.340033] Stack:
[  822.340033]  0000000000000000 0000000100000000 0000000000000000
0000000000000000
[  822.340033]  0000000000000000 0801010a00000000 0000000000000000
0000000000000000
[  822.340033]  0000000000000004 ffffffff8148749b ffffffff8187e0c0
000000000000001c
[  822.340033] Call Trace:
[  822.340033]  [] ? mpls_rt_alloc+0x2b/0x3e
[  822.340033]  [] ? mpls_rtm_newroute+0x358/0x3e2
[  822.340033]  [] ? get_page+0x5/0xa
[  822.340033]  [] ? rtnetlink_rcv_msg+0x17e/0x191
[  822.340033]  [] ? __kmalloc_track_caller+0x8c/0x9e
[  822.340033]  [] ?
rht_key_hashfn.isra.20.constprop.57+0x14/0x1f
[  822.340033]  [] ? __rtnl_unlock+0xc/0xc
[  822.340033]  [] ? netlink_rcv_skb+0x36/0x82
[  822.340033]  [] ? rtnetlink_rcv+0x1f/0x28
[  822.340033]  [] ? netlink_unicast+0x106/0x189
[  822.340033]  [] ? netlink_sendmsg+0x27f/0x2c8
[  822.340033]  [] ? sock_sendmsg_nosec+0x10/0x1b
[  822.340033]  [] ? ___sys_sendmsg+0x182/0x1e3
[  822.340033]  [] ?
__alloc_pages_nodemask+0x11c/0x1e4
[  822.340033]  [] ? PageAnon+0x5/0xd
[  822.340033]  [] ? __page_set_anon_rmap+0x45/0x52
[  822.340033]  [] ? get_page+0x5/0xa
[  822.340033]  [] ? __lru_cache_add+0x1a/0x3a
[  822.340033]  [] ? current_kernel_time64+0x9/0x30
[  822.340033]  [] ? __sys_sendmsg+0x3c/0x5a
[  822.340033]  [] ?
entry_SYSCALL_64_fastpath+0x12/0x6a
[  822.340033] Code: 83 08 04 00 00 65 ff 00 48 8b 3c 24 e8 40 7c f2 ff
eb 13 48 c7 c3 9f ff ff ff eb 0f 89 ce e8 f1 ae f1 ff 48 89 c3 48 85 db
74 15 <48> 8b 83 08 04 00 00 65 ff 08 48 81 fb 00 f0 ff ff 76 0d eb 07
[  822.340033] RIP  [] mpls_nh_assign_dev+0x10b/0x182
[  822.340033]  RSP 
[  822.340033] CR2: 00000000000003a3
[  822.435363] ---[ end trace 98cc65e6f6b8bf11 ]---

After patch:
$ip -f mpls route add 100 as 200 via inet 10.1.1.8
RTNETLINK answers: Network is unreachable

Signed-off-by: Roopa Prabhu 
Reported-by: David Miller 
Signed-off-by: David S. Miller

mpls: autoload lwt module

2016-02-22T03:00:28+00:00

Avoid users having to manually load the module by adding a module
alias allowing it to be autoloaded by the lwt infra.

Signed-off-by: Robert Shearman 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-12-18T03:08:28+00:00

Conflicts:
	drivers/net/geneve.c

Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.

Signed-off-by: David S. Miller

mpls: make via address optional for multipath routes

2015-12-12T05:43:44+00:00

The via address is optional for a single path route, yet is mandatory
when the multipath attribute is used:

  # ip -f mpls route add 100 dev lo
  # ip -f mpls route add 101 nexthop dev lo
  RTNETLINK answers: Invalid argument

Make them consistent by making the via address optional when the
RTA_MULTIPATH attribute is being parsed so that both forms of
specifying the route work.

Signed-off-by: Robert Shearman 
Signed-off-by: David S. Miller

mpls: fix out-of-bounds access when via address not specified

2015-12-12T05:43:44+00:00

When a via address isn't specified, the via table is left initialised
to 0 (NEIGH_ARP_TABLE), and the via address length also left
initialised to 0. This results in a via address array of length 0
being allocated (contiguous with route and nexthop array), meaning
that when a packet is sent using neigh_xmit the neighbour lookup and
creation will cause an out-of-bounds access when accessing the 4 bytes
of the IPv4 address it assumes it has been given a pointer to.

This could be fixed by allocating the 4 bytes of via address necessary
and leaving it as all zeroes. However, it seems wrong to me to use an
ipv4 nexthop (including possibly ARPing for 0.0.0.0) when the user
didn't specify to do so.

Instead, set the via address table to NEIGH_NR_TABLES to signify it
hasn't been specified and use this at forwarding time to signify a
neigh_xmit using an L2 address consisting of the device address. This
mechanism is the same as that used for both ARP and ND for loopback
interfaces and those flagged as no-arp, which are all we can really
support in this case.

Fixes: cf4b24f0024f ("mpls: reduce memory usage of routes")
Signed-off-by: Robert Shearman 
Signed-off-by: David S. Miller

mpls: don't dump RTA_VIA attribute if not specified

2015-12-12T05:43:44+00:00

The problem seen is that when adding a route with a nexthop with no
via address specified, iproute2 generates bogus output:

  # ip -f mpls route add 100 dev lo
  # ip -f mpls route list
  100 via inet 0.0.8.0 dev lo

The reason for this is that the kernel generates an RTA_VIA attribute
with the family set to AF_INET, but the via address data having zero
length. The cause of family being AF_INET is that on route insert
cfg->rc_via_table is left set to 0, which just happens to be
NEIGH_ARP_TABLE which is then translated into AF_INET.

iproute2 doesn't validate the length prior to printing and so prints
garbage. Although it could be fixed to do the validation, I would
argue that AF_INET addresses should always be exactly 4 bytes so the
kernel is really giving userspace bogus data.

Therefore, avoid generating the RTA_VIA attribute when dumping the
route if the via address wasn't specified on add/modify. This is
indicated by NEIGH_ARP_TABLE and a zero via address length - if the
user specified a via address the address length would have been
validated such that it was 4 bytes. Although this is a change in
behaviour that is visible to userspace, I believe that what was
generated before was invalid and as such userspace wouldn't be
expecting it.

Signed-off-by: Robert Shearman 
Signed-off-by: David S. Miller

mpls: validate L2 via address length

2015-12-12T05:43:44+00:00

If an L2 via address for an mpls nexthop is specified, the length of
the L2 address must match that expected by the output device,
otherwise it could access memory beyond the end of the via address
buffer in the route.

This check was present prior to commit f8efb73c97e2 ("mpls: multipath
route support"), but got lost in the refactoring, so add it back,
applying it to all nexthops in multipath routes.

Fixes: f8efb73c97e2 ("mpls: multipath route support")
Signed-off-by: Robert Shearman 
Acked-by: Roopa Prabhu 
Signed-off-by: David S. Miller

mpls_iptunnel: add static qualifier to mpls_output

2015-12-12T01:17:43+00:00

This gets rid of the following compile warn:
net/mpls/mpls_iptunnel.c:40:5: warning: no previous prototype for
mpls_output [-Wmissing-prototypes]

Signed-off-by: Roopa Prabhu 
Acked-by: Robert Shearman 
Signed-off-by: David S. Miller

mpls: fix sending of local encapped packets

2015-12-07T21:32:47+00:00

Locally generated IPv4 and (probably) IPv6 packets are dropped because
skb->protocol isn't set. We could write wrappers to lwtunnel_output
for IPv4 and IPv6 that set the protocol accordingly and then call
lwtunnel_output, but mpls_output relies on the AF-specific type of dst
anyway to get the via address.

Therefore, make use of dst->dst_ops->family in mpls_output to
determine the type of nexthop and thus protocol of the packet instead
of checking skb->protocol.

Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry")
Reported-by: Sam Russell 
Signed-off-by: Robert Shearman 
Signed-off-by: David S. Miller

mpls: support for dead routes

2015-12-03T20:03:27+00:00

Adds support for RTNH_F_DEAD and RTNH_F_LINKDOWN flags on mpls
routes due to link events. Also adds code to ignore dead
routes during route selection.

Unlike ip routes, mpls routes are not deleted when the route goes
dead. This is current mpls behaviour and this patch does not change
that. With this patch however, routes will be marked dead.
dead routes are not notified to userspace (this is consistent with ipv4
routes).

dead routes:
-----------
$ip -f mpls route show
100
    nexthop as to 200 via inet 10.1.1.2  dev swp1
    nexthop as to 700 via inet 10.1.1.6  dev swp2

$ip link set dev swp1 down

$ip link show dev swp1
4: swp1:  mtu 1500 qdisc pfifo_fast state DOWN mode
DEFAULT group default qlen 1000
    link/ether 00:02:00:00:00:01 brd ff:ff:ff:ff:ff:ff

$ip -f mpls route show
100
    nexthop as to 200 via inet 10.1.1.2  dev swp1 dead linkdown
    nexthop as to 700 via inet 10.1.1.6  dev swp2

linkdown routes:
----------------
$ip -f mpls route show
100
    nexthop as to 200 via inet 10.1.1.2  dev swp1
    nexthop as to 700 via inet 10.1.1.6  dev swp2

$ip link show dev swp1
4: swp1:  mtu 1500 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 1000
    link/ether 00:02:00:00:00:01 brd ff:ff:ff:ff:ff:ff

/* carrier goes down */
$ip link show dev swp1
4: swp1:  mtu 1500 qdisc pfifo_fast
state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:02:00:00:00:01 brd ff:ff:ff:ff:ff:ff

$ip -f mpls route show
100
    nexthop as to 200 via inet 10.1.1.2  dev swp1 linkdown
    nexthop as to 700 via inet 10.1.1.6  dev swp2

Signed-off-by: Roopa Prabhu 
Acked-by: Robert Shearman 
Signed-off-by: David S. Miller