linux-stable.git/net/mac80211, branch v6.0.2

wifi: mac80211: fix crash in beacon protection for P2P-device

2022-10-15T06:02:58+00:00

commit b2d03cabe2b2e150ff5a381731ea0355459be09f upstream.

If beacon protection is active but the beacon cannot be
decrypted or is otherwise malformed, we call the cfg80211
API to report this to userspace, but that uses a netdev
pointer, which isn't present for P2P-Device. Fix this to
call it only conditionally to ensure cfg80211 won't crash
in the case of P2P-Device.

This fixes CVE-2022-42722.

Reported-by: Sönke Huster 
Fixes: 9eaf183af741 ("mac80211: Report beacon protection failures to user space")
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

wifi: mac80211: fix MBSSID parsing use-after-free

2022-10-15T06:02:57+00:00

commit ff05d4b45dd89b922578dac497dcabf57cf771c6 upstream.

When we parse a multi-BSSID element, we might point some
element pointers into the allocated nontransmitted_profile.
However, we free this before returning, causing UAF when the
relevant pointers in the parsed elements are accessed.

Fix this by not allocating the scratch buffer separately but
as part of the returned structure instead, that way, there
are no lifetime issues with it.

The scratch buffer introduction as part of the returned data
here is taken from MLO feature work done by Ilan.

This fixes CVE-2022-42719.

Fixes: 5023b14cf4df ("mac80211: support profile split between elements")
Co-developed-by: Ilan Peer 
Signed-off-by: Ilan Peer 
Reviewed-by: Kees Cook 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

wifi: cfg80211/mac80211: reject bad MBSSID elements

2022-10-15T06:02:57+00:00

commit 8f033d2becc24aa6bfd2a5c104407963560caabc upstream.

Per spec, the maximum value for the MaxBSSID ('n') indicator is 8,
and the minimum is 1 since a multiple BSSID set with just one BSSID
doesn't make sense (the # of BSSIDs is limited by 2^n).

Limit this in the parsing in both cfg80211 and mac80211, rejecting
any elements with an invalid value.

This fixes potentially bad shifts in the processing of these inside
the cfg80211_gen_new_bssid() function later.

I found this during the investigation of CVE-2022-41674 fixed by the
previous patch.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Fixes: 78ac51f81532 ("mac80211: support multi-bssid")
Reviewed-by: Kees Cook 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'wireless-2022-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

2022-09-27T23:52:45+00:00

Johannes Berg says:

====================
A few late-comer fixes:
 * locking in mac80211 MLME
 * non-QoS driver crash/regression
 * minstrel memory corruption
 * TX deadlock
 * TX queues not always enabled
 * HE/EHT bitrate calculation

* tag 'wireless-2022-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: mlme: Fix double unlock on assoc success handling
  wifi: mac80211: mlme: Fix missing unlock on beacon RX
  wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()
  wifi: mac80211: fix regression with non-QoS drivers
  wifi: mac80211: ensure vif queues are operational after start
  wifi: mac80211: don't start TX with fq->lock to fix deadlock
  wifi: cfg80211: fix MCS divisor value
====================

Link: https://lore.kernel.org/r/20220927135923.45312-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski

wifi: mac80211: mlme: Fix double unlock on assoc success handling

2022-09-27T08:34:45+00:00

Commit 6911458dc428 ("wifi: mac80211: mlme: refactor assoc success
handling") moved the per-link setup out of ieee80211_assoc_success() into a
new function ieee80211_assoc_config_link() but missed to remove the unlock
of 'sta_mtx' in case of HE capability/operation missing on HE AP, which
leads to a double unlock:

ieee80211_assoc_success() {
    ...
    ieee80211_assoc_config_link() {
        ...
        if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
            (!elems->he_cap || !elems->he_operation)) {
            mutex_unlock(&sdata->local->sta_mtx);
            ...
        }
        ...
    }
    ...
    mutex_unlock(&sdata->local->sta_mtx);
    ...
}

Fixes: 6911458dc428 ("wifi: mac80211: mlme: refactor assoc success handling")
Signed-off-by: Rafael Mendonca 
Link: https://lore.kernel.org/r/20220925143420.784975-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg

wifi: mac80211: mlme: Fix missing unlock on beacon RX

2022-09-27T08:33:51+00:00

Commit 98b0b467466c ("wifi: mac80211: mlme: use correct link_sta")
switched to link station instead of deflink and added some checks to do
that, which are done with the 'sta_mtx' mutex held. However, the error
path of these checks does not unlock 'sta_mtx' before returning.

Fixes: 98b0b467466c ("wifi: mac80211: mlme: use correct link_sta")
Signed-off-by: Rafael Mendonca 
Link: https://lore.kernel.org/r/20220924184042.778676-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg

wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()

2022-09-27T08:33:10+00:00

During our testing of WFM200 module over SDIO on i.MX6Q-based platform,
we discovered a memory corruption on the system, tracing back to the wfx
driver. Using kfence, it was possible to trace it back to the root
cause, which is hw->max_rates set to 8 in wfx_init_common,
while the maximum defined by IEEE80211_TX_TABLE_SIZE is 4.

This causes array out-of-bounds writes during updates of the rate table,
as seen below:

BUG: KFENCE: memory corruption in kfree_rcu_work+0x320/0x36c

Corrupted memory at 0xe0a4ffe0 [ 0x03 0x03 0x03 0x03 0x01 0x00 0x00
0x02 0x02 0x02 0x09 0x00 0x21 0xbb 0xbb 0xbb ] (in kfence-#81):
kfree_rcu_work+0x320/0x36c
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c
0x0

kfence-#81: 0xe0a4ffc0-0xe0a4ffdf, size=32, cache=kmalloc-64

allocated by task 297 on cpu 0 at 631.039555s:
minstrel_ht_update_rates+0x38/0x2b0 [mac80211]
rate_control_tx_status+0xb4/0x148 [mac80211]
ieee80211_tx_status_ext+0x364/0x1030 [mac80211]
ieee80211_tx_status+0xe0/0x118 [mac80211]
ieee80211_tasklet_handler+0xb0/0xe0 [mac80211]
tasklet_action_common.constprop.0+0x11c/0x148
__do_softirq+0x1a4/0x61c
irq_exit+0xcc/0x104
call_with_stack+0x18/0x20
__irq_svc+0x80/0xb0
wq_worker_sleeping+0x10/0x100
wq_worker_sleeping+0x10/0x100
schedule+0x50/0xe0
schedule_timeout+0x2e0/0x474
wait_for_completion+0xdc/0x1ec
mmc_wait_for_req_done+0xc4/0xf8
mmc_io_rw_extended+0x3b4/0x4ec
sdio_io_rw_ext_helper+0x290/0x384
sdio_memcpy_toio+0x30/0x38
wfx_sdio_copy_to_io+0x88/0x108 [wfx]
wfx_data_write+0x88/0x1f0 [wfx]
bh_work+0x1c8/0xcc0 [wfx]
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c 0x0

After discussion on the wireless mailing list it was clarified
that the issue has been introduced by:
commit ee0e16ab756a ("mac80211: minstrel_ht: fill all requested rates")
and fix shall be in minstrel_ht_update_rates in rc80211_minstrel_ht.c.

Fixes: ee0e16ab756a ("mac80211: minstrel_ht: fill all requested rates")
Link: https://lore.kernel.org/all/12e5adcd-8aed-f0f7-70cc-4fb7b656b829@camlingroup.com/
Link: https://lore.kernel.org/linux-wireless/20220915131445.30600-1-lech.perczak@camlingroup.com/
Cc: Jérôme Pouiller 
Cc: Johannes Berg 
Cc: Peter Seiderer 
Cc: Kalle Valo 
Cc: Krzysztof Drobiński ,
Signed-off-by: Paweł Lenkow 
Signed-off-by: Lech Perczak 
Reviewed-by: Peter Seiderer 
Reviewed-by: Jérôme Pouiller 
Acked-by: Felix Fietkau 
Signed-off-by: Johannes Berg

wifi: mac80211: fix regression with non-QoS drivers

2022-09-27T08:32:36+00:00

Commit 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port")
changed ieee80211_tx_control_port() to aways call
__ieee80211_select_queue() without checking local->hw.queues.

__ieee80211_select_queue() returns a queue-id between 0 and 3, which means
that now ieee80211_tx_control_port() may end up setting the queue-mapping
for a skb to a value higher then local->hw.queues if local->hw.queues
is less then 4.

Specifically this is a problem for ralink rt2500-pci cards where
local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to
return NULL and the following error to be logged: "ieee80211 phy0:
rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
after which association with the AP fails.

Other callers of __ieee80211_select_queue() skip calling it when
local->hw.queues < IEEE80211_NUM_ACS, add the same check to
ieee80211_tx_control_port(). This fixes ralink rt2500-pci and
similar cards when less then 4 tx-queues no longer working.

Fixes: 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port")
Cc: Markus Theil 
Suggested-by: Stanislaw Gruszka 
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com
Signed-off-by: Johannes Berg

wifi: mac80211: ensure vif queues are operational after start

2022-09-27T08:31:52+00:00

Make sure local->queue_stop_reasons and vif.txqs_stopped stay in sync.

When a new vif is created the queues may end up in an inconsistent state
and be inoperable:
Communication not using iTXQ will work, allowing to e.g. complete the
association. But the 4-way handshake will time out. The sta will not
send out any skbs queued in iTXQs.

All normal attempts to start the queues will fail when reaching this
state.
local->queue_stop_reasons will have marked all queues as operational but
vif.txqs_stopped will still be set, creating an inconsistent internal
state.

In reality this seems to be race between the mac80211 function
ieee80211_do_open() setting SDATA_STATE_RUNNING and the wake_txqs_tasklet:
Depending on the driver and the timing the queues may end up to be
operational or not.

Cc: stable@vger.kernel.org
Fixes: f856373e2f31 ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Signed-off-by: Alexander Wetzel 
Acked-by: Felix Fietkau 
Link: https://lore.kernel.org/r/20220915130946.302803-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg

wifi: mac80211: don't start TX with fq->lock to fix deadlock

2022-09-27T08:29:04+00:00

ieee80211_txq_purge() calls fq_tin_reset() and
ieee80211_purge_tx_queue(); Both are then calling
ieee80211_free_txskb(). Which can decide to TX the skb again.

There are at least two ways to get a deadlock:

1) When we have a TDLS teardown packet queued in either tin or frags
   ieee80211_tdls_td_tx_handle() will call ieee80211_subif_start_xmit()
   while we still hold fq->lock. ieee80211_txq_enqueue() will thus
   deadlock.

2) A variant of the above happens if aggregation is up and running:
   In that case ieee80211_iface_work() will deadlock with the original
   task: The original tasks already holds fq->lock and tries to get
   sta->lock after kicking off ieee80211_iface_work(). But the worker
   can get sta->lock prior to the original task and will then spin for
   fq->lock.

Avoid these deadlocks by not sending out any skbs when called via
ieee80211_free_txskb().

Signed-off-by: Alexander Wetzel 
Link: https://lore.kernel.org/r/20220915124120.301918-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg