linux-stable.git/net/llc, branch v4.14.78

llc: use refcount_inc_not_zero() for llc_sap_find()

2018-08-22T05:46:08+00:00

[ Upstream commit 0dcb82254d65f72333aa50ad626d1e9665ad093b ]

llc_sap_put() decreases the refcnt before deleting sap
from the global list. Therefore, there is a chance
llc_sap_find() could find a sap with zero refcnt
in this global list.

Close this race condition by checking if refcnt is zero
or not in llc_sap_find(), if it is zero then it is being
removed so we can just treat it as gone.

Reported-by: 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

llc: properly handle dev_queue_xmit() return value

2018-05-30T05:52:20+00:00

[ Upstream commit b85ab56c3f81c5a24b5a5213374f549df06430da ]

llc_conn_send_pdu() pushes the skb into write queue and
calls llc_conn_send_pdus() to flush them out. However, the
status of dev_queue_xmit() is not returned to caller,
in this case, llc_conn_state_process().

llc_conn_state_process() needs hold the skb no matter
success or failure, because it still uses it after that,
therefore we should hold skb before dev_queue_xmit() when
that skb is the one being processed by llc_conn_state_process().

For other callers, they can just pass NULL and ignore
the return value as they are.

Reported-by: Noam Rathaus 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

llc: better deal with too small mtu

2018-05-19T08:20:23+00:00

[ Upstream commit 2c5d5b13c6eb79f5677e206b8aad59b3a2097f60 ]

syzbot loves to set very small mtu on devices, since it brings joy.
We must make llc_ui_sendmsg() fool proof.

usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)!

kernel BUG at mm/usercopy.c:100!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88
RSP: 0018:ffff8801868bf800 EFLAGS: 00010282
RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000
RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6
RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0
R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0
R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0
FS:  00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602
Call Trace:
 check_bogus_address mm/usercopy.c:153 [inline]
 __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256
 check_object_size include/linux/thread_info.h:108 [inline]
 check_copy_size include/linux/thread_info.h:139 [inline]
 copy_from_iter_full include/linux/uio.h:121 [inline]
 memcpy_from_msg include/linux/skbuff.h:3305 [inline]
 llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x455979
RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018
RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000
Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8
RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

llc: fix NULL pointer deref for SOCK_ZAPPED

2018-04-29T09:33:13+00:00

[ Upstream commit 3a04ce7130a7e5dad4e78d45d50313747f8c830f ]

For SOCK_ZAPPED socket, we don't need to care about llc->sap,
so we should just skip these refcount functions in this case.

Fixes: f7e43672683b ("llc: hold llc_sap before release_sock()")
Reported-by: kernel test robot 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

llc: hold llc_sap before release_sock()

2018-04-29T09:33:13+00:00

[ Upstream commit f7e43672683b097bb074a8fe7af9bc600a23f231 ]

syzbot reported we still access llc->sap in llc_backlog_rcv()
after it is freed in llc_sap_remove_socket():

Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
 llc_conn_ac_send_sabme_cmd_p_set_x+0x3a8/0x460 net/llc/llc_c_ac.c:785
 llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline]
 llc_conn_service net/llc/llc_conn.c:400 [inline]
 llc_conn_state_process+0x4e1/0x13a0 net/llc/llc_conn.c:75
 llc_backlog_rcv+0x195/0x1e0 net/llc/llc_conn.c:891
 sk_backlog_rcv include/net/sock.h:909 [inline]
 __release_sock+0x12f/0x3a0 net/core/sock.c:2335
 release_sock+0xa4/0x2b0 net/core/sock.c:2850
 llc_ui_release+0xc8/0x220 net/llc/af_llc.c:204

llc->sap is refcount'ed and llc_sap_remove_socket() is paired
with llc_sap_add_socket(). This can be amended by holding its refcount
before llc_sap_remove_socket() and releasing it after release_sock().

Reported-by: 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

llc: delete timers synchronously in llc_sk_free()

2018-04-29T09:33:11+00:00

[ Upstream commit b905ef9ab90115d001c1658259af4b1c65088779 ]

The connection timers of an llc sock could be still flying
after we delete them in llc_sk_free(), and even possibly
after we free the sock. We could just wait synchronously
here in case of troubles.

Note, I leave other call paths as they are, since they may
not have to wait, at least we can change them to synchronously
when needed.

Also, move the code to net/llc/llc_conn.c, which is apparently
a better place.

Reported-by: 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

net, llc: convert llc_sap.refcnt from atomic_t to refcount_t

2017-07-04T21:35:15+00:00

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova 
Signed-off-by: Hans Liljestrand 
Signed-off-by: Kees Cook 
Signed-off-by: David Windsor 
Signed-off-by: David S. Miller

net: convert sock.sk_refcnt from atomic_t to refcount_t

2017-07-01T14:39:08+00:00

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

This patch uses refcount_inc_not_zero() instead of
atomic_inc_not_zero_hint() due to absense of a _hint()
version of refcount API. If the hint() version must
be used, we might need to revisit API.

Signed-off-by: Elena Reshetova 
Signed-off-by: Hans Liljestrand 
Signed-off-by: Kees Cook 
Signed-off-by: David Windsor 
Signed-off-by: David S. Miller

net: llc: add lock_sock in llc_ui_bind to avoid a race condition

2017-05-26T18:20:29+00:00

There is a race condition in llc_ui_bind if two or more processes/threads
try to bind a same socket.

If more processes/threads bind a same socket success that will lead to
two problems, one is this action is not what we expected, another is
will lead to kernel in unstable status or oops(in my simple test case,
cause llc2.ko can't unload).

The current code is test SOCK_ZAPPED bit to avoid a process to
bind a same socket twice but that is can't avoid more processes/threads
try to bind a same socket at the same time.

So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect.

Signed-off-by: Lin Zhang 
Signed-off-by: David S. Miller