linux-stable.git/net/l2tp, branch v6.10

l2tp: fix ICMP error handling for UDP-encap sockets

2024-05-17T19:15:22+00:00

Since commit a36e185e8c85
("udp: Handle ICMP errors for tunnels with same destination port on both endpoints")
UDP's handling of ICMP errors has allowed for UDP-encap tunnels to
determine socket associations in scenarios where the UDP hash lookup
could not.

Subsequently, commit d26796ae58940
("udp: check udp sock encap_type in __udp_lib_err")
subtly tweaked the approach such that UDP ICMP error handling would be
skipped for any UDP socket which has encapsulation enabled.

In the case of L2TP tunnel sockets using UDP-encap, this latter
modification effectively broke ICMP error reporting for the L2TP
control plane.

To a degree this isn't catastrophic inasmuch as the L2TP control
protocol defines a reliable transport on top of the underlying packet
switching network which will eventually detect errors and time out.

However, paying attention to the ICMP error reporting allows for more
timely detection of errors in L2TP userspace, and aids in debugging
connectivity issues.

Reinstate ICMP error handling for UDP encap L2TP tunnels:

 * implement struct udp_tunnel_sock_cfg .encap_err_rcv in order to allow
   the L2TP code to handle ICMP errors;

 * only implement error-handling for tunnels which have a managed
   socket: unmanaged tunnels using a kernel socket have no userspace to
   report errors back to;

 * flag the error on the socket, which allows for userspace to get an
   error such as -ECONNREFUSED back from sendmsg/recvmsg;

 * pass the error into ip[v6]_icmp_error() which allows for userspace to
   get extended error information via. MSG_ERRQUEUE.

Fixes: d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err")
Signed-off-by: Tom Parkin 
Link: https://lore.kernel.org/r/20240513172248.623261-1-tparkin@katalix.com
Signed-off-by: Jakub Kicinski

l2tp: Support different protocol versions with same IP/port quadruple

2024-05-13T22:49:42+00:00

628bc3e5a1be ("l2tp: Support several sockets with same IP/port quadruple")
added support for several L2TPv2 tunnels using the same IP/port quadruple,
but if an L2TPv3 socket exists it could eat all the trafic. We thus have to
first use the version from the packet to get the proper tunnel, and only
then check that the version matches.

Signed-off-by: Samuel Thibault 
Reviewed-by: James Chapman 
Link: https://lore.kernel.org/r/20240509205812.4063198-1-samuel.thibault@ens-lyon.org
Signed-off-by: Jakub Kicinski

l2tp: Support several sockets with same IP/port quadruple

2024-05-09T13:50:36+00:00

Some l2tp providers will use 1701 as origin port and open several
tunnels for the same origin and target. On the Linux side, this
may mean opening several sockets, but then trafic will go to only
one of them, losing the trafic for the tunnel of the other socket
(or leaving it up to userland, consuming a lot of cpu%).

This can also happen when the l2tp provider uses a cluster, and
load-balancing happens to migrate from one origin IP to another one,
for which a socket was already established. Managing reassigning
tunnels from one socket to another would be very hairy for userland.

Lastly, as documented in l2tpconfig(1), as client it may be necessary
to use 1701 as origin port for odd firewalls reasons, which could
prevent from establishing several tunnels to a l2tp server, for the
same reason: trafic would get only on one of the two sockets.

With the V2 protocol it is however easy to route trafic to the proper
tunnel, by looking up the tunnel number in the network namespace. This
fixes the three cases altogether.

Signed-off-by: Samuel Thibault 
Link: https://lore.kernel.org/r/20240506215336.1470009-1-samuel.thibault@ens-lyon.org
Signed-off-by: Paolo Abeni

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-05-02T19:06:25+00:00

Cross-merge networking fixes after downstream PR.

Conflicts:

include/linux/filter.h
kernel/bpf/core.c
  66e13b615a0c ("bpf: verifier: prevent userspace memory access")
  d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/

No adjacent changes.

Signed-off-by: Jakub Kicinski

inet: introduce dst_rtable() helper

2024-05-01T01:32:38+00:00

I added dst_rt6_info() in commit
e8dfd42c17fa ("ipv6: introduce dst_rt6_info() helper")

This patch does a similar change for IPv4.

Instead of (struct rtable *)dst casts, we can use :

 #define dst_rtable(_ptr) \
             container_of_const(_ptr, struct rtable, dst)

Patch is smaller than IPv6 one, because IPv4 has skb_rtable() helper.

Signed-off-by: Eric Dumazet 
Reviewed-by: David Ahern 
Reviewed-by: Sabrina Dubroca 
Link: https://lore.kernel.org/r/20240429133009.1227754-1-edumazet@google.com
Signed-off-by: Jakub Kicinski

ipv6: introduce dst_rt6_info() helper

2024-04-29T12:32:01+00:00

Instead of (struct rt6_info *)dst casts, we can use :

 #define dst_rt6_info(_ptr) \
         container_of_const(_ptr, struct rt6_info, dst)

Some places needed missing const qualifiers :

ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()

v2: added missing parts (David Ahern)

Signed-off-by: Eric Dumazet 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

net l2tp: drop flow hash on forward

2024-04-26T11:48:24+00:00

Drop the flow-hash of the skb when forwarding to the L2TP netdev.

This avoids the L2TP qdisc from using the flow-hash from the outer
packet, which is identical for every flow within the tunnel.

This does not affect every platform but is specific for the ethernet
driver. It depends on the platform including L4 information in the
flow-hash.

One such example is the Mediatek Filogic MT798x family of networking
processors.

Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Acked-by: James Chapman 
Signed-off-by: David Bauer 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20240424171110.13701-1-mail@david-bauer.net
Signed-off-by: Paolo Abeni

l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt() function

2024-03-11T09:53:22+00:00

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reviewed-by: Tom Parkin 
Signed-off-by: Gavrilov Ilia 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-02-22T23:29:26+00:00

Cross-merge networking fixes after downstream PR.

Conflicts:

net/ipv4/udp.c
  f796feabb9f5 ("udp: add local "peek offset enabled" flag")
  56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")

Adjacent changes:

net/unix/garbage.c
  aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
  11498715f266 ("af_unix: Remove io_uring code for GC.")

Signed-off-by: Jakub Kicinski

l2tp: pass correct message length to ip6_append_data

2024-02-22T09:42:17+00:00

l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.

To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.

However, the code which performed the calculation was incorrect:

     ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;

...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.

Add parentheses to correct the calculation in line with the original
intent.

Fixes: 9d4c75800f61 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells 
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com
Signed-off-by: Paolo Abeni