linux-stable.git/net/l2tp, branch v3.2.98

l2tp: don't use l2tp_tunnel_find() in l2tp_ip and l2tp_ip6

2018-01-01T20:51:02+00:00

commit 8f7dc9ae4a7aece9fbc3e6637bdfa38b36bcdf09 upstream.

Using l2tp_tunnel_find() in l2tp_ip_recv() is wrong for two reasons:

  * It doesn't take a reference on the returned tunnel, which makes the
    call racy wrt. concurrent tunnel deletion.

  * The lookup is only based on the tunnel identifier, so it can return
    a tunnel that doesn't match the packet's addresses or protocol.

For example, a packet sent to an L2TPv3 over IPv6 tunnel can be
delivered to an L2TPv2 over UDPv4 tunnel. This is worse than a simple
cross-talk: when delivering the packet to an L2TP over UDP tunnel, the
corresponding socket is UDP, where ->sk_backlog_rcv() is NULL. Calling
sk_receive_skb() will then crash the kernel by trying to execute this
callback.

And l2tp_tunnel_find() isn't even needed here. __l2tp_ip_bind_lookup()
properly checks the socket binding and connection settings. It was used
as a fallback mechanism for finding tunnels that didn't have their data
path registered yet. But it's not limited to this case and can be used
to replace l2tp_tunnel_find() in the general case.

Fix l2tp_ip6 in the same way.

Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support")
Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2:
 - Always look up in init_net
 - Drop changes in l2tp_ip6.c
 - Adjust context]
Signed-off-by: Ben Hutchings

l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6

2018-01-01T20:51:01+00:00

commit 94d7ee0baa8b764cf64ad91ed69464c1a6a0066b upstream.

The code following l2tp_tunnel_find() expects that a new reference is
held on sk. Either sk_receive_skb() or the discard_put error path will
drop a reference from the tunnel's socket.

This issue exists in both l2tp_ip and l2tp_ip6.

Fixes: a3c18422a4b4 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2:
 - Drop changes to l2tp_ip6.c
 - Adjust context]
Signed-off-by: Ben Hutchings

l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()

2018-01-01T20:51:01+00:00

commit a3c18422a4b4e108bcf6a2328f48867e1003fd95 upstream.

Socket must be held while under the protection of the l2tp lock; there
is no guarantee that sk remains valid after the read_unlock_bh() call.

Same issue for l2tp_ip and l2tp_ip6.

Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2:
 - Drop changes in l2tp_ip6.c
 - Adjust context]
Signed-off-by: Ben Hutchings

l2tp: hold tunnel in pppol2tp_connect()

2018-01-01T20:51:00+00:00

commit f9e56baf03f9d36043a78f16e3e8b2cfd211e09e upstream.

Use l2tp_tunnel_get() in pppol2tp_connect() to ensure the tunnel isn't
going to disappear while processing the rest of the function.

Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

l2tp: check ps->sock before running pppol2tp_session_ioctl()

2018-01-01T20:50:58+00:00

commit 5903f594935a3841137c86b9d5b75143a5b7121c upstream.

When pppol2tp_session_ioctl() is called by pppol2tp_tunnel_ioctl(),
the session may be unconnected. That is, it was created by
pppol2tp_session_create() and hasn't been connected with
pppol2tp_connect(). In this case, ps->sock is NULL, so we need to check
for this case in order to avoid dereferencing a NULL pointer.

Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

l2tp: fix l2tp_eth module loading

2018-01-01T20:50:54+00:00

commit 9f775ead5e570e7e19015b9e4e2f3dd6e71a5935 upstream.

The l2tp_eth module crashes if its netlink callbacks are run when the
pernet data aren't initialised.

We should normally register_pernet_device() before the genl callbacks.
However, the pernet data only maintain a list of l2tpeth interfaces,
and this list is never used. So let's just drop pernet handling
instead.

Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

l2tp: pass tunnel pointer to ->session_create()

2017-11-26T13:51:07+00:00

commit f026bc29a8e093edfbb2a77700454b285c97e8ad upstream.

Using l2tp_tunnel_find() in pppol2tp_session_create() and
l2tp_eth_create() is racy, because no reference is held on the
returned session. These functions are only used to implement the
->session_create callback which is run by l2tp_nl_cmd_session_create().
Therefore searching for the parent tunnel isn't necessary because
l2tp_nl_cmd_session_create() already has a pointer to it and holds a
reference.

This patch modifies ->session_create()'s prototype to directly pass the
the parent tunnel as parameter, thus avoiding searching for it in
pppol2tp_session_create() and l2tp_eth_create().

Since we have to touch the ->session_create() call in
l2tp_nl_cmd_session_create(), let's also remove the useless conditional:
we know that ->session_create isn't NULL at this point because it's
already been checked earlier in this same function.

Finally, one might be tempted to think that the removed
l2tp_tunnel_find() calls were harmless because they would return the
same tunnel as the one held by l2tp_nl_cmd_session_create() anyway.
But that tunnel might be removed and a new one created with same tunnel
Id before the l2tp_tunnel_find() call. In this case l2tp_tunnel_find()
would return the new tunnel which wouldn't be protected by the
reference held by l2tp_nl_cmd_session_create().

Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

l2tp: prevent creation of sessions on terminated tunnels

2017-11-26T13:51:07+00:00

commit f3c66d4e144a0904ea9b95d23ed9f8eb38c11bfb upstream.

l2tp_tunnel_destruct() sets tunnel->sock to NULL, then removes the
tunnel from the pernet list and finally closes all its sessions.
Therefore, it's possible to add a session to a tunnel that is still
reachable, but for which tunnel->sock has already been reset. This can
make l2tp_session_create() dereference a NULL pointer when calling
sock_hold(tunnel->sock).

This patch adds the .acpt_newsess field to struct l2tp_tunnel, which is
used by l2tp_tunnel_closeall() to prevent addition of new sessions to
tunnels. Resetting tunnel->sock is done after l2tp_tunnel_closeall()
returned, so that l2tp_session_add_to_tunnel() can safely take a
reference on it when .acpt_newsess is true.

The .acpt_newsess field is modified in l2tp_tunnel_closeall(), rather
than in l2tp_tunnel_destruct(), so that it benefits all tunnel removal
mechanisms. E.g. on UDP tunnels, a session could be added to a tunnel
after l2tp_udp_encap_destroy() proceeded. This would prevent the tunnel
from being removed because of the references held by this new session
on the tunnel and its socket. Even though the session could be removed
manually later on, this defeats the purpose of
commit 9980d001cec8 ("l2tp: add udp encap socket destroy handler").

Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2:
 - Drop changes in l2tp_tunnel_destruct(), as the assignment to tunnel->sock
   is already after the call to l2tp_tunnel_closeall()
 - Adjust context]
Signed-off-by: Ben Hutchings

l2tp: hold tunnel used while creating sessions with netlink

2017-11-11T13:34:35+00:00

commit e702c1204eb57788ef189c839c8c779368267d70 upstream.

Use l2tp_tunnel_get() to retrieve tunnel, so that it can't go away on
us. Otherwise l2tp_tunnel_destruct() might release the last reference
count concurrently, thus freeing the tunnel while we're using it.

Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

l2tp: remove useless duplicate session detection in l2tp_netlink

2017-11-11T13:34:35+00:00

commit af87ae465abdc070de0dc35d6c6a9e7a8cd82987 upstream.

There's no point in checking for duplicate sessions at the beginning of
l2tp_nl_cmd_session_create(); the ->session_create() callbacks already
return -EEXIST when the session already exists.

Furthermore, even if l2tp_session_find() returns NULL, a new session
might be created right after the test. So relying on ->session_create()
to avoid duplicate session is the only sane behaviour.

Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: also delete the now-unused local variable]
Signed-off-by: Ben Hutchings