linux-stable.git/net/ipv6, branch v5.4.90

net: ipv6: fib: flush exceptions when purging route

2021-01-17T13:05:31+00:00

[ Upstream commit d8f5c29653c3f6995e8979be5623d263e92f6b86 ]

Route removal is handled by two code paths. The main removal path is via
fib6_del_route() which will handle purging any PMTU exceptions from the
cache, removing all per-cpu copies of the DST entry used by the route, and
releasing the fib6_info struct.

The second removal location is during fib6_add_rt2node() during a route
replacement operation. This path also calls fib6_purge_rt() to handle
cleaning up the per-cpu copies of the DST entries and releasing the
fib6_info associated with the older route, but it does not flush any PMTU
exceptions that the older route had. Since the older route is removed from
the tree during the replacement, we lose any way of accessing it again.

As these lingering DSTs and the fib6_info struct are holding references to
the underlying netdevice struct as well, unregistering that device from the
kernel can never complete.

Fixes: 2b760fcf5cfb3 ("ipv6: hook up exception table to store dst cache")
Signed-off-by: Sean Tranchetti 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/1609892546-11389-1-git-send-email-stranche@quicinc.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

netfilter: x_tables: Update remaining dereference to RCU

2021-01-12T19:16:24+00:00

commit 443d6e86f821a165fae3fc3fc13086d27ac140b1 upstream.

This fixes the dereference to fetch the RCU pointer when holding
the appropriate xtables lock.

Reported-by: kernel test robot 
Fixes: cc00bcaa5899 ("netfilter: x_tables: Switch synchronization to RCU")
Signed-off-by: Subash Abhinov Kasiviswanathan 
Reviewed-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

netfilter: x_tables: Switch synchronization to RCU

2020-12-30T10:50:54+00:00

[ Upstream commit cc00bcaa589914096edef7fb87ca5cee4a166b5c ]

When running concurrent iptables rules replacement with data, the per CPU
sequence count is checked after the assignment of the new information.
The sequence count is used to synchronize with the packet path without the
use of any explicit locking. If there are any packets in the packet path using
the table information, the sequence count is incremented to an odd value and
is incremented to an even after the packet process completion.

The new table value assignment is followed by a write memory barrier so every
CPU should see the latest value. If the packet path has started with the old
table information, the sequence counter will be odd and the iptables
replacement will wait till the sequence count is even prior to freeing the
old table info.

However, this assumes that the new table information assignment and the memory
barrier is actually executed prior to the counter check in the replacement
thread. If CPU decides to execute the assignment later as there is no user of
the table information prior to the sequence check, the packet path in another
CPU may use the old table information. The replacement thread would then free
the table information under it leading to a use after free in the packet
processing context-

Unable to handle kernel NULL pointer dereference at virtual
address 000000000000008e
pc : ip6t_do_table+0x5d0/0x89c
lr : ip6t_do_table+0x5b8/0x89c
ip6t_do_table+0x5d0/0x89c
ip6table_filter_hook+0x24/0x30
nf_hook_slow+0x84/0x120
ip6_input+0x74/0xe0
ip6_rcv_finish+0x7c/0x128
ipv6_rcv+0xac/0xe4
__netif_receive_skb+0x84/0x17c
process_backlog+0x15c/0x1b8
napi_poll+0x88/0x284
net_rx_action+0xbc/0x23c
__do_softirq+0x20c/0x48c

This could be fixed by forcing instruction order after the new table
information assignment or by switching to RCU for the synchronization.

Fixes: 80055dab5de0 ("netfilter: x_tables: make xt_replace_table wait until old rules are not used anymore")
Reported-by: Sean Tranchetti 
Reported-by: kernel test robot 
Suggested-by: Florian Westphal 
Signed-off-by: Subash Abhinov Kasiviswanathan 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

net: ip6_gre: set dev->hard_header_len when using header_ops

2020-12-08T09:40:26+00:00

[ Upstream commit 832ba596494b2c9eac7760259eff2d8b7dcad0ee ]

syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:

  skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:109!
  Call Trace:
  skb_push+0x10/0x10
  ip6gre_header+0x47/0x1b0
  neigh_connected_output+0xae/0xf0

ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.

Fixes: eb95f52fc72d ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik 
Signed-off-by: Antoine Tenart 
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init

2020-12-08T09:40:23+00:00

[ Upstream commit e255e11e66da8281e337e4e352956e8a4999fca4 ]

kmemleak report a memory leak as follows:

unreferenced object 0xffff8880059c6a00 (size 64):
  comm "ip", pid 23696, jiffies 4296590183 (age 1755.384s)
  hex dump (first 32 bytes):
    20 01 00 10 00 00 00 00 00 00 00 00 00 00 00 00   ...............
    1c 00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
  backtrace:
    [<00000000aa4e7a87>] ip6addrlbl_add+0x90/0xbb0
    [<0000000070b8d7f1>] ip6addrlbl_net_init+0x109/0x170
    [<000000006a9ca9d4>] ops_init+0xa8/0x3c0
    [<000000002da57bf2>] setup_net+0x2de/0x7e0
    [<000000004e52d573>] copy_net_ns+0x27d/0x530
    [<00000000b07ae2b4>] create_new_namespaces+0x382/0xa30
    [<000000003b76d36f>] unshare_nsproxy_namespaces+0xa1/0x1d0
    [<0000000030653721>] ksys_unshare+0x3a4/0x780
    [<0000000007e82e40>] __x64_sys_unshare+0x2d/0x40
    [<0000000031a10c08>] do_syscall_64+0x33/0x40
    [<0000000099df30e7>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

We should free all rules when we catch an error in ip6addrlbl_net_init().
otherwise a memory leak will occur.

Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.")
Reported-by: Hulk Robot 
Signed-off-by: Wang Hai 
Link: https://lore.kernel.org/r/20201124071728.8385-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

ipv6: Fix error path to cancel the meseage

2020-11-24T12:28:56+00:00

[ Upstream commit ceb736e1d45c253f5e86b185ca9b497cdd43063f ]

genlmsg_cancel() needs to be called in the error path of
inet6_fill_ifmcaddr and inet6_fill_ifacaddr to cancel
the message.

Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Reported-by: Hulk Robot 
Signed-off-by: Zhang Qilong 
Link: https://lore.kernel.org/r/20201112080950.1476302-1-zhangqilong3@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

Exempt multicast addresses from five-second neighbor lifetime

2020-11-24T12:28:56+00:00

[ Upstream commit 8cf8821e15cd553339a5b48ee555a0439c2b2742 ]

Commit 58956317c8de ("neighbor: Improve garbage collection")
guarantees neighbour table entries a five-second lifetime.  Processes
which make heavy use of multicast can fill the neighour table with
multicast addresses in five seconds.  At that point, neighbour entries
can't be GC-ed because they aren't five seconds old yet, the kernel
log starts to fill up with "neighbor table overflow!" messages, and
sends start to fail.

This patch allows multicast addresses to be thrown out before they've
lived out their five seconds.  This makes room for non-multicast
addresses and makes messages to all addresses more reliable in these
circumstances.

Fixes: 58956317c8de ("neighbor: Improve garbage collection")
Signed-off-by: Jeff Dike 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

ah6: fix error return code in ah6_input()

2020-11-24T12:28:55+00:00

[ Upstream commit a5ebcbdf34b65fcc07f38eaf2d60563b42619a59 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot 
Signed-off-by: Zhang Changzhong 
Link: https://lore.kernel.org/r/1605581105-35295-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: Update window_clamp if SOCK_RCVBUF is set

2020-11-18T18:20:32+00:00

[ Upstream commit 909172a149749242990a6e64cb55d55460d4e417 ]

When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.

Fixes: e88c64f0a425 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt")
Signed-off-by: Mao Wenan 
Signed-off-by: Eric Dumazet 
Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

IPv6: Set SIT tunnel hard_header_len to zero

2020-11-18T18:20:32+00:00

[ Upstream commit 8ef9ba4d666614497a057d09b0a6eafc1e34eadf ]

Due to the legacy usage of hard_header_len for SIT tunnels while
already using infrastructure from net/ipv4/ip_tunnel.c the
calculation of the path MTU in tnl_update_pmtu is incorrect.
This leads to unnecessary creation of MTU exceptions for any
flow going over a SIT tunnel.

As SIT tunnels do not have a header themsevles other than their
transport (L3, L2) headers we're leaving hard_header_len set to zero
as tnl_update_pmtu is already taking care of the transport headers
sizes.

This will also help avoiding unnecessary IPv6 GC runs and spinlock
contention seen when using SIT tunnels and for more than
net.ipv6.route.gc_thresh flows.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Oliver Herms 
Acked-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20201103104133.GA1573211@tws
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman