linux-stable.git/net/ipv6, branch v5.4.83

net: ip6_gre: set dev->hard_header_len when using header_ops

2020-12-08T09:40:26+00:00

[ Upstream commit 832ba596494b2c9eac7760259eff2d8b7dcad0ee ]

syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:

  skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:109!
  Call Trace:
  skb_push+0x10/0x10
  ip6gre_header+0x47/0x1b0
  neigh_connected_output+0xae/0xf0

ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.

Fixes: eb95f52fc72d ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik 
Signed-off-by: Antoine Tenart 
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init

2020-12-08T09:40:23+00:00

[ Upstream commit e255e11e66da8281e337e4e352956e8a4999fca4 ]

kmemleak report a memory leak as follows:

unreferenced object 0xffff8880059c6a00 (size 64):
  comm "ip", pid 23696, jiffies 4296590183 (age 1755.384s)
  hex dump (first 32 bytes):
    20 01 00 10 00 00 00 00 00 00 00 00 00 00 00 00   ...............
    1c 00 00 00 00 00 00 00 00 00 00 00 07 00 00 00  ................
  backtrace:
    [<00000000aa4e7a87>] ip6addrlbl_add+0x90/0xbb0
    [<0000000070b8d7f1>] ip6addrlbl_net_init+0x109/0x170
    [<000000006a9ca9d4>] ops_init+0xa8/0x3c0
    [<000000002da57bf2>] setup_net+0x2de/0x7e0
    [<000000004e52d573>] copy_net_ns+0x27d/0x530
    [<00000000b07ae2b4>] create_new_namespaces+0x382/0xa30
    [<000000003b76d36f>] unshare_nsproxy_namespaces+0xa1/0x1d0
    [<0000000030653721>] ksys_unshare+0x3a4/0x780
    [<0000000007e82e40>] __x64_sys_unshare+0x2d/0x40
    [<0000000031a10c08>] do_syscall_64+0x33/0x40
    [<0000000099df30e7>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

We should free all rules when we catch an error in ip6addrlbl_net_init().
otherwise a memory leak will occur.

Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.")
Reported-by: Hulk Robot 
Signed-off-by: Wang Hai 
Link: https://lore.kernel.org/r/20201124071728.8385-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

ipv6: Fix error path to cancel the meseage

2020-11-24T12:28:56+00:00

[ Upstream commit ceb736e1d45c253f5e86b185ca9b497cdd43063f ]

genlmsg_cancel() needs to be called in the error path of
inet6_fill_ifmcaddr and inet6_fill_ifacaddr to cancel
the message.

Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Reported-by: Hulk Robot 
Signed-off-by: Zhang Qilong 
Link: https://lore.kernel.org/r/20201112080950.1476302-1-zhangqilong3@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

Exempt multicast addresses from five-second neighbor lifetime

2020-11-24T12:28:56+00:00

[ Upstream commit 8cf8821e15cd553339a5b48ee555a0439c2b2742 ]

Commit 58956317c8de ("neighbor: Improve garbage collection")
guarantees neighbour table entries a five-second lifetime.  Processes
which make heavy use of multicast can fill the neighour table with
multicast addresses in five seconds.  At that point, neighbour entries
can't be GC-ed because they aren't five seconds old yet, the kernel
log starts to fill up with "neighbor table overflow!" messages, and
sends start to fail.

This patch allows multicast addresses to be thrown out before they've
lived out their five seconds.  This makes room for non-multicast
addresses and makes messages to all addresses more reliable in these
circumstances.

Fixes: 58956317c8de ("neighbor: Improve garbage collection")
Signed-off-by: Jeff Dike 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

ah6: fix error return code in ah6_input()

2020-11-24T12:28:55+00:00

[ Upstream commit a5ebcbdf34b65fcc07f38eaf2d60563b42619a59 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot 
Signed-off-by: Zhang Changzhong 
Link: https://lore.kernel.org/r/1605581105-35295-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: Update window_clamp if SOCK_RCVBUF is set

2020-11-18T18:20:32+00:00

[ Upstream commit 909172a149749242990a6e64cb55d55460d4e417 ]

When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.

Fixes: e88c64f0a425 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt")
Signed-off-by: Mao Wenan 
Signed-off-by: Eric Dumazet 
Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

IPv6: Set SIT tunnel hard_header_len to zero

2020-11-18T18:20:32+00:00

[ Upstream commit 8ef9ba4d666614497a057d09b0a6eafc1e34eadf ]

Due to the legacy usage of hard_header_len for SIT tunnels while
already using infrastructure from net/ipv4/ip_tunnel.c the
calculation of the path MTU in tnl_update_pmtu is incorrect.
This leads to unnecessary creation of MTU exceptions for any
flow going over a SIT tunnel.

As SIT tunnels do not have a header themsevles other than their
transport (L3, L2) headers we're leaving hard_header_len set to zero
as tnl_update_pmtu is already taking care of the transport headers
sizes.

This will also help avoiding unnecessary IPv6 GC runs and spinlock
contention seen when using SIT tunnels and for more than
net.ipv6.route.gc_thresh flows.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Oliver Herms 
Acked-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20201103104133.GA1573211@tws
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

netfilter: use actual socket sk rather than skb sk when routing harder

2020-11-18T18:20:17+00:00

[ Upstream commit 46d6c5ae953cc0be38efd0e469284df7c4328cf8 ]

If netfilter changes the packet mark when mangling, the packet is
rerouted using the route_me_harder set of functions. Prior to this
commit, there's one big difference between route_me_harder and the
ordinary initial routing functions, described in the comment above
__ip_queue_xmit():

   /* Note: skb->sk can be different from sk, in case of tunnels */
   int __ip_queue_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,

That function goes on to correctly make use of sk->sk_bound_dev_if,
rather than skb->sk->sk_bound_dev_if. And indeed the comment is true: a
tunnel will receive a packet in ndo_start_xmit with an initial skb->sk.
It will make some transformations to that packet, and then it will send
the encapsulated packet out of a *new* socket. That new socket will
basically always have a different sk_bound_dev_if (otherwise there'd be
a routing loop). So for the purposes of routing the encapsulated packet,
the routing information as it pertains to the socket should come from
that socket's sk, rather than the packet's original skb->sk. For that
reason __ip_queue_xmit() and related functions all do the right thing.

One might argue that all tunnels should just call skb_orphan(skb) before
transmitting the encapsulated packet into the new socket. But tunnels do
*not* do this -- and this is wisely avoided in skb_scrub_packet() too --
because features like TSQ rely on skb->destructor() being called when
that buffer space is truely available again. Calling skb_orphan(skb) too
early would result in buffers filling up unnecessarily and accounting
info being all wrong. Instead, additional routing must take into account
the new sk, just as __ip_queue_xmit() notes.

So, this commit addresses the problem by fishing the correct sk out of
state->sk -- it's already set properly in the call to nf_hook() in
__ip_local_out(), which receives the sk as part of its normal
functionality. So we make sure to plumb state->sk through the various
route_me_harder functions, and then make correct use of it following the
example of __ip_queue_xmit().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason A. Donenfeld 
Reviewed-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

netfilter: nf_log: missing vlan offload tag and proto

2020-10-29T08:57:45+00:00

[ Upstream commit 0d9826bc18ce356e8909919ad681ad65d0a6061e ]

Dump vlan tag and proto for the usual vlan offload case if the
NF_LOG_MACDECODE flag is set on. Without this information the logging is
misleading as there is no reference to the VLAN header.

[12716.993704] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0800 SRC=192.168.10.2 DST=172.217.168.163 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2548 DF PROTO=TCP SPT=55848 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0
[12721.157643] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0806 ARP HTYPE=1 PTYPE=0x0800 OPCODE=2 MACSRC=86:6c:92:ea:d6:73 IPSRC=192.168.10.2 MACDST=0e:3b:eb:86:73:76 IPDST=192.168.10.1

Fixes: 83e96d443b37 ("netfilter: log: split family specific code to nf_log_{ip,ip6,common}.c files")
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

net: fix pos incrementment in ipv6_route_seq_next

2020-10-29T08:57:23+00:00

[ Upstream commit 6617dfd440149e42ce4d2be615eb31a4755f4d30 ]

Commit 4fc427e05158 ("ipv6_route_seq_next should increase position index")
tried to fix the issue where seq_file pos is not increased
if a NULL element is returned with seq_ops->next(). See bug
  https://bugzilla.kernel.org/show_bug.cgi?id=206283
The commit effectively does:
  - increase pos for all seq_ops->start()
  - increase pos for all seq_ops->next()

For ipv6_route, increasing pos for all seq_ops->next() is correct.
But increasing pos for seq_ops->start() is not correct
since pos is used to determine how many items to skip during
seq_ops->start():
  iter->skip = *pos;
seq_ops->start() just fetches the *current* pos item.
The item can be skipped only after seq_ops->show() which essentially
is the beginning of seq_ops->next().

For example, I have 7 ipv6 route entries,
  root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=4096
  00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001     eth0
  fe800000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000001 00000000 00000001     eth0
  00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200       lo
  00000000000000000000000000000001 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000003 00000000 80200001       lo
  fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001     eth0
  ff000000000000000000000000000000 08 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000004 00000000 00000001     eth0
  00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200       lo
  0+1 records in
  0+1 records out
  1050 bytes (1.0 kB, 1.0 KiB) copied, 0.00707908 s, 148 kB/s
  root@arch-fb-vm1:~/net-next

In the above, I specify buffer size 4096, so all records can be returned
to user space with a single trip to the kernel.

If I use buffer size 128, since each record size is 149, internally
kernel seq_read() will read 149 into its internal buffer and return the data
to user space in two read() syscalls. Then user read() syscall will trigger
next seq_ops->start(). Since the current implementation increased pos even
for seq_ops->start(), it will skip record #2, #4 and #6, assuming the first
record is #1.

  root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=128
  00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001     eth0
  00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200       lo
  fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001     eth0
  00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200       lo
4+1 records in
4+1 records out
600 bytes copied, 0.00127758 s, 470 kB/s

To fix the problem, create a fake pos pointer so seq_ops->start()
won't actually increase seq_file pos. With this fix, the
above `dd` command with `bs=128` will show correct result.

Fixes: 4fc427e05158 ("ipv6_route_seq_next should increase position index")
Cc: Alexei Starovoitov 
Suggested-by: Vasily Averin 
Reviewed-by: Vasily Averin 
Signed-off-by: Yonghong Song 
Acked-by: Martin KaFai Lau 
Acked-by: Andrii Nakryiko 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman