linux-stable.git/net/ipv6, branch v5.4.71

ipv6_route_seq_next should increase position index

2020-10-01T11:17:25+00:00

[ Upstream commit 4fc427e0515811250647d44de38d87d7b0e0790f ]

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: ipv6: fix kconfig dependency warning for IPV6_SEG6_HMAC

2020-09-26T16:03:13+00:00

[ Upstream commit db7cd91a4be15e1485d6b58c6afc8761c59c4efb ]

When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the
following Kbuild warning:

WARNING: unmet direct dependencies detected for CRYPTO_HMAC
  Depends on [n]: CRYPTO [=n]
  Selected by [y]:
  - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]

WARNING: unmet direct dependencies detected for CRYPTO_SHA1
  Depends on [n]: CRYPTO [=n]
  Selected by [y]:
  - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]

WARNING: unmet direct dependencies detected for CRYPTO_SHA256
  Depends on [n]: CRYPTO [=n]
  Selected by [y]:
  - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]

The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and
CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs
are subordinate to CRYPTO.

Honor the kconfig menu hierarchy to remove kconfig dependency warnings.

Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Signed-off-by: Necip Fazil Yildiran 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: avoid lockdep issue in fib6_del()

2020-09-26T16:03:12+00:00

[ Upstream commit 843d926b003ea692468c8cc5bea1f9f58dfa8c75 ]

syzbot reported twice a lockdep issue in fib6_del() [1]
which I think is caused by net->ipv6.fib6_null_entry
having a NULL fib6_table pointer.

fib6_del() already checks for fib6_null_entry special
case, we only need to return earlier.

Bug seems to occur very rarely, I have thus chosen
a 'bug origin' that makes backports not too complex.

[1]
WARNING: suspicious RCU usage
5.9.0-rc4-syzkaller #0 Not tainted
-----------------------------
net/ipv6/ip6_fib.c:1996 suspicious rcu_dereference_protected() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
4 locks held by syz-executor.5/8095:
 #0: ffffffff8a7ea708 (rtnl_mutex){+.+.}-{3:3}, at: ppp_release+0x178/0x240 drivers/net/ppp/ppp_generic.c:401
 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: spin_trylock_bh include/linux/spinlock.h:414 [inline]
 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: fib6_run_gc+0x21b/0x2d0 net/ipv6/ip6_fib.c:2312
 #2: ffffffff89bd6a40 (rcu_read_lock){....}-{1:2}, at: __fib6_clean_all+0x0/0x290 net/ipv6/ip6_fib.c:2613
 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:359 [inline]
 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: __fib6_clean_all+0x107/0x290 net/ipv6/ip6_fib.c:2245

stack backtrace:
CPU: 1 PID: 8095 Comm: syz-executor.5 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x198/0x1fd lib/dump_stack.c:118
 fib6_del+0x12b4/0x1630 net/ipv6/ip6_fib.c:1996
 fib6_clean_node+0x39b/0x570 net/ipv6/ip6_fib.c:2180
 fib6_walk_continue+0x4aa/0x8e0 net/ipv6/ip6_fib.c:2102
 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2150
 fib6_clean_tree+0xdb/0x120 net/ipv6/ip6_fib.c:2230
 __fib6_clean_all+0x120/0x290 net/ipv6/ip6_fib.c:2246
 fib6_clean_all net/ipv6/ip6_fib.c:2257 [inline]
 fib6_run_gc+0x113/0x2d0 net/ipv6/ip6_fib.c:2320
 ndisc_netdev_event+0x217/0x350 net/ipv6/ndisc.c:1805
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2033
 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline]
 call_netdevice_notifiers net/core/dev.c:2059 [inline]
 dev_close_many+0x30b/0x650 net/core/dev.c:1634
 rollback_registered_many+0x3a8/0x1210 net/core/dev.c:9261
 rollback_registered net/core/dev.c:9329 [inline]
 unregister_netdevice_queue+0x2dd/0x570 net/core/dev.c:10410
 unregister_netdevice include/linux/netdevice.h:2774 [inline]
 ppp_release+0x216/0x240 drivers/net/ppp/ppp_generic.c:403
 __fput+0x285/0x920 fs/file_table.c:281
 task_work_run+0xdd/0x190 kernel/task_work.c:141
 tracehook_notify_resume include/linux/tracehook.h:188 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
 exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 421842edeaf6 ("net/ipv6: Add fib6_null_entry")
Signed-off-by: Eric Dumazet 
Cc: David Ahern 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: Fix sysctl max for fib_multipath_hash_policy

2020-09-12T12:18:55+00:00

[ Upstream commit 05d4487197b2b71d5363623c28924fd58c71c0b6 ]

Cited commit added the possible value of '2', but it cannot be set. Fix
it by adjusting the maximum value to '2'. This is consistent with the
corresponding IPv4 sysctl.

Before:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 0

After:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 2

Fixes: d8f74f0975d8 ("ipv6: Support multipath hashing on inner IP pkts")
Signed-off-by: Ido Schimmel 
Reviewed-by: Stephen Suryaputra 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

netfilter: avoid ipv6 -> nf_defrag_ipv6 module dependency

2020-09-03T09:26:58+00:00

[ Upstream commit 2404b73c3f1a5f15726c6ecd226b56f6f992767f ]

nf_ct_frag6_gather is part of nf_defrag_ipv6.ko, not ipv6 core.

The current use of the netfilter ipv6 stub indirections  causes a module
dependency between ipv6 and nf_defrag_ipv6.

This prevents nf_defrag_ipv6 module from being removed because ipv6 can't
be unloaded.

Remove the indirection and always use a direct call.  This creates a
depency from nf_conntrack_bridge to nf_defrag_ipv6 instead:

modinfo nf_conntrack
depends:        nf_conntrack,nf_defrag_ipv6,bridge

.. and nf_conntrack already depends on nf_defrag_ipv6 anyway.

Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY

2020-09-03T09:26:39+00:00

[ Upstream commit 272502fcb7cda01ab07fc2fcff82d1d2f73d43cc ]

When receiving an IPv4 packet inside an IPv6 GRE packet, and the
IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would
get corrupted. This is due to the common ip6_tnl_rcv() function assuming
that the inner header is always IPv6. This patch checks the tunnel
protocol for IPv4 inner packets, but still defaults to IPv6.

Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Signed-off-by: Mark Tomlinson 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: Fix nexthop refcnt leak when creating ipv6 route info

2020-08-11T13:33:39+00:00

[ Upstream commit 706ec919164622ff5ce822065472d0f30a9e9dd2 ]

ip6_route_info_create() invokes nexthop_get(), which increases the
refcount of the "nh".

When ip6_route_info_create() returns, local variable "nh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one exception handling path of
ip6_route_info_create(). When nexthops can not be used with source
routing, the function forgets to decrease the refcnt increased by
nexthop_get(), causing a refcnt leak.

Fix this issue by pulling up the error source routing handling when
nexthops can not be used with source routing.

Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Xiyu Yang 
Signed-off-by: Xin Tan 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: fix memory leaks on IPV6_ADDRFORM path

2020-08-11T13:33:39+00:00

[ Upstream commit 8c0de6e96c9794cb523a516c465991a70245da1c ]

IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.

This bug can be easily reproduced with the following C program:

  #include 
  #include 
  #include 
  #include 
  #include 

  int main()
  {
    int s, value;
    struct sockaddr_in6 addr;
    struct ipv6_mreq m6;

    s = socket(AF_INET6, SOCK_DGRAM, 0);
    addr.sin6_family = AF_INET6;
    addr.sin6_port = htons(5000);
    inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
    connect(s, (struct sockaddr *)&addr, sizeof(addr));

    inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
    m6.ipv6mr_interface = 5;
    setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));

    value = AF_INET;
    setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));

    close(s);
    return 0;
  }

Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

udp: Improve load balancing for SO_REUSEPORT.

2020-07-31T16:39:31+00:00

[ Upstream commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace ]

Currently, SO_REUSEPORT does not work well if connected sockets are in a
UDP reuseport group.

Then reuseport_has_conns() returns true and the result of
reuseport_select_sock() is discarded. Also, unconnected sockets have the
same score, hence only does the first unconnected socket in udp_hslot
always receive all packets sent to unconnected sockets.

So, the result of reuseport_select_sock() should be used for load
balancing.

The noteworthy point is that the unconnected sockets placed after
connected sockets in sock_reuseport.socks will receive more packets than
others because of the algorithm in reuseport_select_sock().

    index | connected | reciprocal_scale | result
    ---------------------------------------------
    0     | no        | 20%              | 40%
    1     | no        | 20%              | 20%
    2     | yes       | 20%              | 0%
    3     | no        | 20%              | 40%
    4     | yes       | 20%              | 0%

If most of the sockets are connected, this can be a problem, but it still
works better than now.

Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn 
Reviewed-by: Benjamin Herrenschmidt 
Signed-off-by: Kuniyuki Iwashima 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: udp: Fix wrong clean up for IS_UDPLITE macro

2020-07-31T16:39:30+00:00

[ Upstream commit b0a422772fec29811e293c7c0e6f991c0fd9241d ]

We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is
checked.

Fixes: b2bf1e2659b1 ("[UDP]: Clean up for IS_UDPLITE macro")
Signed-off-by: Miaohe Lin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman