linux-stable.git/net/ipv6, branch v5.4.166

seg6: fix the iif in the IPv6 socket control block

2021-12-14T13:49:00+00:00

commit ae68d93354e5bf5191ee673982251864ea24dd5c upstream.

When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving
interface index into the IPv4 socket control block (v5.16-rc4,
net/ipv4/ip_input.c line 510):

    IPCB(skb)->iif = skb->skb_iif;

If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH
header, the seg6_do_srh_encap(...) performs the required encapsulation.
In this case, the seg6_do_srh_encap function clears the IPv6 socket control
block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163):

    memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));

The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear
IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29).

Since the IPv6 socket control block and the IPv4 socket control block share
the same memory area (skb->cb), the receiving interface index info is lost
(IP6CB(skb)->iif is set to zero).

As a side effect, that condition triggers a NULL pointer dereference if
commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig
netdev") is applied.

To fix that issue, we set the IP6CB(skb)->iif with the index of the
receiving interface once again.

Fixes: ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation")
Signed-off-by: Andrea Mayer 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/20211208195409.12169-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

ipv6: fix memory leak in fib6_rule_suppress

2021-12-08T08:01:13+00:00

commit cdef485217d30382f3bf6448c54b4401648fe3f1 upstream.

The kernel leaks memory when a `fib` rule is present in IPv6 nftables
firewall rules and a suppress_prefix rule is present in the IPv6 routing
rules (used by certain tools such as wg-quick). In such scenarios, every
incoming packet will leak an allocation in `ip6_dst_cache` slab cache.

After some hours of `bpftrace`-ing and source code reading, I tracked
down the issue to ca7a03c41753 ("ipv6: do not free rt if
FIB_LOOKUP_NOREF is set on suppress rule").

The problem with that change is that the generic `args->flags` always have
`FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag
`RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not
decreasing the refcount when needed.

How to reproduce:
 - Add the following nftables rule to a prerouting chain:
     meta nfproto ipv6 fib saddr . mark . iif oif missing drop
   This can be done with:
     sudo nft create table inet test
     sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }'
     sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop
 - Run:
     sudo ip -6 rule add table main suppress_prefixlength 0
 - Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase
   with every incoming ipv6 packet.

This patch exposes the protocol-specific flags to the protocol
specific `suppress` function, and check the protocol-specific `flags`
argument for RT6_LOOKUP_F_DST_NOREF instead of the generic
FIB_LOOKUP_NOREF when decreasing the refcount, like this.

[1]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L71
[2]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L99

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215105
Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv6: add fib6_nh_release_dsts stub

2021-12-01T08:23:33+00:00

[ Upstream commit 8837cbbf854246f5f4d565f21e6baa945d37aded ]

We need a way to release a fib6_nh's per-cpu dsts when replacing
nexthops otherwise we can end up with stale per-cpu dsts which hold net
device references, so add a new IPv6 stub called fib6_nh_release_dsts.
It must be used after an RCU grace period, so no new dsts can be created
through a group's nexthop entry.
Similar to fib6_nh_release it shouldn't be used if fib6_nh_init has failed
so it doesn't need a dummy stub when IPv6 is not enabled.

Fixes: 7bf4796dd099 ("nexthops: add support for replace")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ipv6: fix typos in __ip6_finish_output()

2021-12-01T08:23:32+00:00

[ Upstream commit 19d36c5f294879949c9d6f57cb61d39cc4c48553 ]

We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and
IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED

Found by code inspection, please double check that fixing this bug
does not surface other bugs.

Fixes: 09ee9dba9611 ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT")
Signed-off-by: Eric Dumazet 
Cc: Tobias Brunner 
Cc: Steffen Klassert 
Cc: David Ahern 
Reviewed-by: David Ahern 
Tested-by: Tobias Brunner 
Acked-by: Tobias Brunner 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

udp6: allow SO_MARK ctrl msg to affect routing

2021-11-17T08:48:40+00:00

[ Upstream commit 42dcfd850e514b229d616a53dec06d0f2533217c ]

Commit c6af0c227a22 ("ip: support SO_MARK cmsg")
added propagation of SO_MARK from cmsg to skb->mark.
For IPv4 and raw sockets the mark also affects route
lookup, but in case of IPv6 the flow info is
initialized before cmsg is parsed.

Fixes: c6af0c227a22 ("ip: support SO_MARK cmsg")
Reported-and-tested-by: Xintong Hu 
Signed-off-by: Jakub Kicinski 
Reviewed-by: David Ahern 
Reviewed-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

gre/sit: Don't generate link-local addr if addr_gen_mode is IN6_ADDR_GEN_MODE_NONE

2021-11-17T08:48:32+00:00

[ Upstream commit 61e18ce7348bfefb5688a8bcd4b4d6b37c0f9b2a ]

When addr_gen_mode is set to IN6_ADDR_GEN_MODE_NONE, the link-local addr
should not be generated. But it isn't the case for GRE (as well as GRE6)
and SIT tunnels. Make it so that tunnels consider the addr_gen_mode,
especially for IN6_ADDR_GEN_MODE_NONE.

Do this in add_v4_addrs() to cover both GRE and SIT only if the addr
scope is link.

Signed-off-by: Stephen Suryaputra 
Acked-by: Antonio Quartulli 
Link: https://lore.kernel.org/r/20211020200618.467342-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

ipv6: use siphash in rt6_exception_hash()

2021-11-02T18:46:11+00:00

commit 4785305c05b25a242e5314cc821f54ade4c18810 upstream.

A group of security researchers brought to our attention
the weakness of hash function used in rt6_exception_hash()

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Following patch deals with IPv4.

Fixes: 35732d01fe31 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Eric Dumazet 
Reported-by: Keyu Man 
Cc: Wei Wang 
Cc: Martin KaFai Lau 
Acked-by: Wei Wang 
Signed-off-by: David S. Miller 
[OP: adjusted context for 5.4 stable]
Signed-off-by: Ovidiu Panait 
Signed-off-by: Greg Kroah-Hartman

netfilter: ip6_tables: zero-initialize fragment offset

2021-10-17T08:42:33+00:00

[ Upstream commit 310e2d43c3ad429c1fba4b175806cf1f55ed73a6 ]

ip6tables only sets the `IP6T_F_PROTO` flag on a rule if a protocol is
specified (`-p tcp`, for example).  However, if the flag is not set,
`ip6_packet_match` doesn't call `ipv6_find_hdr` for the skb, in which
case the fragment offset is left uninitialized and a garbage value is
passed to each matcher.

Signed-off-by: Jeremy Sowden 
Reviewed-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

net: prefer socket bound to interface when not in VRF

2021-10-13T08:08:20+00:00

[ Upstream commit 8d6c414cd2fb74aa6812e9bfec6178f8246c4f3a ]

The commit 6da5b0f027a8 ("net: ensure unbound datagram socket to be
chosen when not in a VRF") modified compute_score() so that a device
match is always made, not just in the case of an l3mdev skb, then
increments the score also for unbound sockets. This ensures that
sockets bound to an l3mdev are never selected when not in a VRF.
But as unbound and bound sockets are now scored equally, this results
in the last opened socket being selected if there are matches in the
default VRF for an unbound socket and a socket bound to a dev that is
not an l3mdev. However, handling prior to this commit was to always
select the bound socket in this case. Reinstate this handling by
incrementing the score only for bound sockets. The required isolation
due to choosing between an unbound socket and a socket bound to an
l3mdev remains in place due to the device match always being made.
The same approach is taken for compute_score() for stream sockets.

Fixes: 6da5b0f027a8 ("net: ensure unbound datagram socket to be chosen when not in a VRF")
Fixes: e78190581aff ("net: ensure unbound stream socket to be chosen when not in a VRF")
Signed-off-by: Mike Manning 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/cf0a8523-b362-1edf-ee78-eef63cbbb428@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: udp: annotate data race around udp_sk(sk)->corkflag

2021-10-06T13:42:37+00:00

commit a9f5970767d11eadc805d5283f202612c7ba1f59 upstream.

up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman