linux-stable.git/net/ipv6, branch v4.9.166

net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255

2019-03-19T12:14:09+00:00

[ Upstream commit 97f0082a0592212fc15d4680f5a4d80f79a1687c ]

Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 to
keep legacy software happy. This is similar to what was done for
ipv4 in commit 709772e6e065 ("net: Fix routing tables with
id > 255 for legacy software").

Signed-off-by: Kalash Nainwal 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: sit: fix UBSAN Undefined behaviour in check_6rd

2019-03-19T12:14:08+00:00

[ Upstream commit a843dc4ebaecd15fca1f4d35a97210f72ea1473b ]

In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to
32,so UBSAN complain about it.

UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
ubsan_epilogue+0xe/0x81 lib/ubsan.c:159
__ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425
check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781
try_6rd net/ipv6/sit.c:806 [inline]
ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline]
sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033
__netdev_start_xmit include/linux/netdevice.h:4300 [inline]
netdev_start_xmit include/linux/netdevice.h:4309 [inline]
xmit_one net/core/dev.c:3243 [inline]
dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259
__dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829
neigh_output include/net/neighbour.h:501 [inline]
ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120
ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176
ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697
ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717
rawv6_push_pending_frames net/ipv6/raw.c:616 [inline]
rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946
inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xc8/0x110 net/socket.c:631
___sys_sendmsg+0x6cf/0x890 net/socket.c:2114
__sys_sendmsg+0xf0/0x1b0 net/socket.c:2152
do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: linmiaohe 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: sit: fix memory leak in sit_init_net()

2019-03-13T21:04:53+00:00

[ Upstream commit 07f12b26e21ab359261bf75cfcb424fdc7daeb6d ]

If register_netdev() is failed to register sitn->fb_tunnel_dev,
it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev).

BUG: memory leak
unreferenced object 0xffff888378daad00 (size 512):
  comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s)
  hex dump (first 32 bytes):
    00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
backtrace:
    [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline]
    [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline]
    [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline]
    [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970
    [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848
    [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129
    [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314
    [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437
    [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107
    [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165
    [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919
    [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline]
    [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224
    [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
    [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<0000000039acff8a>] 0xffffffffffffffff

Signed-off-by: Mao Wenan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ip6mr: Do not call __IP6_INC_STATS() from preemptible context

2019-03-13T21:04:52+00:00

[ Upstream commit 87c11f1ddbbad38ad8bad47af133a8208985fbdf ]

Similar to commit 44f49dd8b5a6 ("ipmr: fix possible race resulting from
improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot
assume preemption is disabled when incrementing the counter and
accessing a per-CPU variable.

Preemption can be enabled when we add a route in process context that
corresponds to packets stored in the unresolved queue, which are then
forwarded using this route [1].

Fix this by using IP6_INC_STATS() which takes care of disabling
preemption on architectures where it is needed.

[1]
[  157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314
[  157.460409] caller is ip6mr_forward2+0x73e/0x10e0
[  157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336
[  157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[  157.460461] Call Trace:
[  157.460486]  dump_stack+0xf9/0x1be
[  157.460553]  check_preemption_disabled+0x1d6/0x200
[  157.460576]  ip6mr_forward2+0x73e/0x10e0
[  157.460705]  ip6_mr_forward+0x9a0/0x1510
[  157.460771]  ip6mr_mfc_add+0x16b3/0x1e00
[  157.461155]  ip6_mroute_setsockopt+0x3cb/0x13c0
[  157.461384]  do_ipv6_setsockopt.isra.8+0x348/0x4060
[  157.462013]  ipv6_setsockopt+0x90/0x110
[  157.462036]  rawv6_setsockopt+0x4a/0x120
[  157.462058]  __sys_setsockopt+0x16b/0x340
[  157.462198]  __x64_sys_setsockopt+0xbf/0x160
[  157.462220]  do_syscall_64+0x14d/0x610
[  157.462349]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 0912ea38de61 ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().")
Signed-off-by: Ido Schimmel 
Reported-by: Amit Cohen 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()

2019-02-27T09:07:01+00:00

[ Upstream commit 173656accaf583698bac3f9e269884ba60d51ef4 ]

If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should
not call ip6_err_gen_icmpv6_unreach(). This:

  ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1
  ip link set sit1 up
  ip addr add 198.51.100.1/24 dev sit1
  ping 198.51.100.2

if IPv6 is disabled at boot time, will crash the kernel.

v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead,
    as we only need to check that idev exists and we are under
    rcu_read_lock() (from netif_receive_skb_internal()).

Reported-by: Jianlin Shi 
Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error")
Cc: Oussama Ghorbel 
Signed-off-by: Hangbin Liu 
Reviewed-by: Stefano Brivio 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: fix IPv6 prefix route residue

2019-02-23T08:05:58+00:00

[ Upstream commit e75913c93f7cd5f338ab373c34c93a655bd309cb ]

Follow those steps:
 # ip addr add 2001:123::1/32 dev eth0
 # ip addr add 2001:123:456::2/64 dev eth0
 # ip addr del 2001:123::1/32 dev eth0
 # ip addr del 2001:123:456::2/64 dev eth0
and then prefix route of 2001:123::1/32 will still exist.

This is because ipv6_prefix_equal in check_cleanup_prefix_route
func does not check whether two IPv6 addresses have the same
prefix length. If the prefix of one address starts with another
shorter address prefix, even though their prefix lengths are
different, the return value of ipv6_prefix_equal is true.

Here I add a check of whether two addresses have the same prefix
to decide whether their prefixes are equal.

Fixes: 5b84efecb7d9 ("ipv6 addrconf: don't cleanup prefix route for IFA_F_NOPREFIXROUTE")
Signed-off-by: Zhiqiang Liu 
Reported-by: Wenhao Zhang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

netfilter: nf_tables: fix mismatch in big-endian system

2019-02-20T09:18:34+00:00

commit 10596608c4d62cb8c1c2b806debcbd32fe657e71 upstream.

Currently, there are two different methods to store an u16 integer to
the u32 data register. For example:
  u32 *dest = ®s->data[priv->dreg];
  1. *dest = 0; *(u16 *) dest = val_u16;
  2. *dest = val_u16;

For method 1, the u16 value will be stored like this, either in
big-endian or little-endian system:
  0          15           31
  +-+-+-+-+-+-+-+-+-+-+-+-+
  |   Value   |     0     |
  +-+-+-+-+-+-+-+-+-+-+-+-+

For method 2, in little-endian system, the u16 value will be the same
as listed above. But in big-endian system, the u16 value will be stored
like this:
  0          15           31
  +-+-+-+-+-+-+-+-+-+-+-+-+
  |     0     |   Value   |
  +-+-+-+-+-+-+-+-+-+-+-+-+

So later we use "memcmp(®s->data[priv->sreg], data, 2);" to do
compare in nft_cmp, nft_lookup expr ..., method 2 will get the wrong
result in big-endian system, as 0~15 bits will always be zero.

For the similar reason, when loading an u16 value from the u32 data
register, we should use "*(u16 *) sreg;" instead of "(u16)*sreg;",
the 2nd method will get the wrong value in the big-endian system.

So introduce some wrapper functions to store/load an u8 or u16
integer to/from the u32 data register, and use them in the right
place.

Signed-off-by: Liping Zhang 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi

2019-02-12T18:44:56+00:00

[ Upstream commit fa89a4593b927b3f59c3b69379f31d3b22272e4e ]

gcc warn this:

net/ipv6/xfrm6_tunnel.c:143 __xfrm6_tunnel_alloc_spi() warn:
 always true condition '(spi <= 4294967295) => (0-u32max <= u32max)'

'spi' is u32, which always not greater than XFRM6_TUNNEL_SPI_MAX
because of wrap around. So the second forloop will never reach.

Signed-off-by: YueHaibing 
Signed-off-by: Steffen Klassert 
Signed-off-by: Sasha Levin

ipv6: Consider sk_bound_dev_if when binding a socket to an address

2019-02-06T16:33:26+00:00

[ Upstream commit c5ee066333ebc322a24a00a743ed941a0c68617e ]

IPv6 does not consider if the socket is bound to a device when binding
to an address. The result is that a socket can be bound to eth0 and then
bound to the address of eth1. If the device is a VRF, the result is that
a socket can only be bound to an address in the default VRF.

Resolve by considering the device if sk_bound_dev_if is set.

This problem exists from the beginning of git history.

Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses

2019-01-26T08:38:32+00:00

[ Upstream commit d4a7e9bb74b5aaf07b89f6531c080b1130bdf019 ]

I realized the last patch calls dev_get_by_index_rcu in a branch not
holding the rcu lock. Add the calls to rcu_read_lock and rcu_read_unlock.

Fixes: ec90ad334986 ("ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman