linux-stable.git/net/ipv6, branch v4.4.154

vti6: fix PMTU caching and reporting on xmit

2018-09-05T07:18:33+00:00

[ Upstream commit d6990976af7c5d8f55903bfb4289b6fb030bf754 ]

When setting the skb->dst before doing the MTU check, the route PMTU
caching and reporting is done on the new dst which is about to be
released.

Instead, PMTU handling should be done using the original dst.

This is aligned with IPv4 VTI.

Fixes: ccd740cbc6 ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Eyal Birger 
Signed-off-by: Steffen Klassert 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

netfilter: x_tables: set module owner for icmp(6) matches

2018-08-24T11:26:58+00:00

[ Upstream commit d376bef9c29b3c65aeee4e785fffcd97ef0a9a81 ]

nft_compat relies on xt_request_find_match to increment
refcount of the module that provides the match/target.

The (builtin) icmp matches did't set the module owner so it
was possible to rmmod ip(6)tables while icmp extensions were still in use.

Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ipv6: mcast: fix unsolicited report interval after receiving querys

2018-08-24T11:26:55+00:00

[ Upstream commit 6c6da92808442908287fae8ebb0ca041a52469f4 ]

After recieving MLD querys, we update idev->mc_maxdelay with max_delay
from query header. This make the later unsolicited reports have the same
interval with mc_maxdelay, which means we may send unsolicited reports with
long interval time instead of default configured interval time.

Also as we will not call ipv6_mc_reset() after device up. This issue will
be there even after leave the group and join other groups.

Fixes: fc4eba58b4c14 ("ipv6: make unsolicited report intervals configurable for mld")
Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

netfilter: ipv6: nf_defrag: reduce struct net memory waste

2018-08-24T11:26:53+00:00

[ Upstream commit 9ce7bc036ae4cfe3393232c86e9e1fea2153c237 ]

It is a waste of memory to use a full "struct netns_sysctl_ipv6"
while only one pointer is really used, considering netns_sysctl_ipv6
keeps growing.

Also, since "struct netns_frags" has cache line alignment,
it is better to move the frags_hdr pointer outside, otherwise
we spend a full cache line for this pointer.

This saves 192 bytes of memory per netns.

Fixes: c038a767cd69 ("ipv6: add a new namespace for nf_conntrack_reasm")
Signed-off-by: Eric Dumazet 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ipv4+ipv6: Make INET*_ESP select CRYPTO_ECHAINIV

2018-08-15T15:42:05+00:00

commit 32b6170ca59ccf07d0e394561e54b2cd9726038c upstream.

The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have
to select CRYPTO_ECHAINIV in order to work properly. This solves the
issues caused by a misconfiguration as described in [1].
The original approach, patching crypto/Kconfig was turned down by
Herbert Xu [2].

[1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html
[2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2

Signed-off-by: Thomas Egerer 
Acked-by: Herbert Xu 
Signed-off-by: David S. Miller 
Cc: Yongqin Liu 
Signed-off-by: Greg Kroah-Hartman

ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull

2018-07-28T05:45:03+00:00

[ Upstream commit 2efd4fca703a6707cad16ab486eaab8fc7f0fd49 ]

Syzbot reported a read beyond the end of the skb head when returning
IPV6_ORIGDSTADDR:

  BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242
  CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x185/0x1d0 lib/dump_stack.c:113
    kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125
    kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219
    kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261
    copy_to_user include/linux/uaccess.h:184 [inline]
    put_cmsg+0x5ef/0x860 net/core/scm.c:242
    ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719
    ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733
    rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521
    [..]

This logic and its ipv4 counterpart read the destination port from
the packet at skb_transport_offset(skb) + 4.

With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a
packet that stores headers exactly up to skb_transport_offset(skb) in
the head and the remainder in a frag.

Call pskb_may_pull before accessing the pointer to ensure that it lies
in skb head.

Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com
Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ip: hash fragments consistently

2018-07-28T05:45:02+00:00

[ Upstream commit 3dd1c9a1270736029ffca670e9bd0265f4120600 ]

The skb hash for locally generated ip[v6] fragments belonging
to the same datagram can vary in several circumstances:
* for connected UDP[v6] sockets, the first fragment get its hash
  via set_owner_w()/skb_set_hash_from_sk()
* for unconnected IPv6 UDPv6 sockets, the first fragment can get
  its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if
  auto_flowlabel is enabled

For the following frags the hash is usually computed via
skb_get_hash().
The above can cause OoO for unconnected IPv6 UDPv6 socket: in that
scenario the egress tx queue can be selected on a per packet basis
via the skb hash.
It may also fool flow-oriented schedulers to place fragments belonging
to the same datagram in different flows.

Fix the issue by copying the skb hash from the head frag into
the others at fragmentation time.

Before this commit:
perf probe -a "dev_queue_xmit skb skb->hash skb->l4_hash:b1@0/8 skb->sw_hash:b1@1/8"
netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n &
perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1
perf script
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=3713014309 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0

After this commit:
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0

Fixes: b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf on xmit")
Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel")
Signed-off-by: Paolo Abeni 
Reviewed-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "sit: reload iphdr in ipip6_rcv"

2018-07-22T12:25:52+00:00

commit f4eb17e1efe538d4da7d574bedb00a8dafcc26b7 upstream.

This reverts commit b699d0035836f6712917a41e7ae58d84359b8ff9.

As per Eric Dumazet, the pskb_may_pull() is a NOP in this
particular case, so the 'iph' reload is unnecessary.

Signed-off-by: David S. Miller 
Cc: Dmitry Tunin 
Signed-off-by: Greg Kroah-Hartman

netfilter: x_tables: initialise match/target check parameter struct

2018-07-17T09:31:46+00:00

commit c568503ef02030f169c9e19204def610a3510918 upstream.

syzbot reports following splat:

BUG: KMSAN: uninit-value in ebt_stp_mt_check+0x24b/0x450
 net/bridge/netfilter/ebt_stp.c:162
 ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162
 xt_check_match+0x1438/0x1650 net/netfilter/x_tables.c:506
 ebt_check_match net/bridge/netfilter/ebtables.c:372 [inline]
 ebt_check_entry net/bridge/netfilter/ebtables.c:702 [inline]

The uninitialised access is
   xt_mtchk_param->nft_compat

... which should be set to 0.
Fix it by zeroing the struct beforehand, same for tgchk.

ip(6)tables targetinfo uses c99-style initialiser, so no change
needed there.

Reported-by: syzbot+da4494182233c23a5fcf@syzkaller.appspotmail.com
Fixes: 55917a21d0cc0 ("netfilter: x_tables: add context to know if extension runs from nft_compat")
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

tcp: verify the checksum of the first data segment in a new connection

2018-07-03T09:21:25+00:00

[ Upstream commit 4fd44a98ffe0d048246efef67ed640fdf2098a62 ]

commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash
table") introduced an optimization for the handling of child sockets
created for a new TCP connection.

But this optimization passes any data associated with the last ACK of the
connection handshake up the stack without verifying its checksum, because it
calls tcp_child_process(), which in turn calls tcp_rcv_state_process()
directly.  These lower-level processing functions do not do any checksum
verification.

Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to
fix this.

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Frank van der Linden 
Signed-off-by: Eric Dumazet 
Tested-by: Balbir Singh 
Reviewed-by: Balbir Singh 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman