linux-stable.git/net/ipv6, branch v4.18.2 Linux kernel stable tree ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmit 2018-08-06T00:35:02+00:00 Xin Long lucien.xin@gmail.com 2018-08-05T14:46:07+00:00 82a40777de12728dedf4075453b694f0d1baee80 According to RFC791, 68 bytes is the minimum size of IPv4 datagram every device must be able to forward without further fragmentation while 576 bytes is the minimum size of IPv4 datagram every device has to be able to receive, so in ip6_tnl_xmit(), 68(IPV4_MIN_MTU) should be the right value for the ipv4 min mtu check in ip6_tnl_xmit. While at it, change to use max() instead of if statement. Fixes: c9fefa08190f ("ip6_tunnel: get the min mtu properly in ip6_tnl_xmit") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
According to RFC791, 68 bytes is the minimum size of IPv4 datagram every
device must be able to forward without further fragmentation while 576
bytes is the minimum size of IPv4 datagram every device has to be able
to receive, so in ip6_tnl_xmit(), 68(IPV4_MIN_MTU) should be the right
value for the ipv4 min mtu check in ip6_tnl_xmit.

While at it, change to use max() instead of if statement.

Fixes: c9fefa08190f ("ip6_tunnel: get the min mtu properly in ip6_tnl_xmit")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: fix double refcount of fib6_metrics 2018-08-06T00:22:45+00:00 Cong Wang xiyou.wangcong@gmail.com 2018-08-03T06:20:38+00:00 e70a3aad44cc8b24986687ffc98c4a4f6ecf25ea All the callers of ip6_rt_copy_init()/rt6_set_from() hold refcnt of the "from" fib6_info, so there is no need to hold fib6_metrics refcnt again, because fib6_metrics refcnt is only released when fib6_info is gone, that is, they have the same life time, so the whole fib6_metrics refcnt can be removed actually. This fixes a kmemleak warning reported by Sabrina. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
All the callers of ip6_rt_copy_init()/rt6_set_from() hold refcnt
of the "from" fib6_info, so there is no need to hold fib6_metrics
refcnt again, because fib6_metrics refcnt is only released when
fib6_info is gone, that is, they have the same life time, so the
whole fib6_metrics refcnt can be removed actually.

This fixes a kmemleak warning reported by Sabrina.

Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert "net/ipv6: fix metrics leak" 2018-08-02T04:32:30+00:00 David S. Miller davem@davemloft.net 2018-08-02T04:32:30+00:00 e6aed040eafb4ce1881bbc59a225f6b27d250396 This reverts commit df18b50448fab1dff093731dfd0e25e77e1afcd1. This change causes other problems and use-after-free situations as found by syzbot. Signed-off-by: David S. Miller <davem@davemloft.net> 
This reverts commit df18b50448fab1dff093731dfd0e25e77e1afcd1.

This change causes other problems and use-after-free situations as
found by syzbot.

Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv6: fix metrics leak 2018-07-30T16:45:57+00:00 Sabrina Dubroca sd@queasysnail.net 2018-07-30T14:23:10+00:00 df18b50448fab1dff093731dfd0e25e77e1afcd1 Since commit d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info"), ipv6 metrics are shared and refcounted. rt6_set_from() assigns the rt->from pointer and increases the refcount on from's metrics. This reference is never released. Introduce the fib6_metrics_release() helper and use it to release the metrics. Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> 
Since commit d4ead6b34b67 ("net/ipv6: move metrics from dst to
rt6_info"), ipv6 metrics are shared and refcounted. rt6_set_from()
assigns the rt->from pointer and increases the refcount on from's
metrics. This reference is never released.

Introduce the fib6_metrics_release() helper and use it to release the
metrics.

Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec 2018-07-27T16:18:19+00:00 David S. Miller davem@davemloft.net 2018-07-27T16:18:19+00:00 d0fdb366b6936f1ddfb4de2631484d58967a7efd Steffen Klassert says: ==================== pull request (net): ipsec 2018-07-27 1) Fix PMTU handling of vti6. We update the PMTU on the xfrm dst_entry which is not cached anymore after the flowchache removal. So update the PMTU of the original dst_entry instead. From Eyal Birger. 2) Fix a leak of kernel memory to userspace. From Eric Dumazet. 3) Fix a possible dst_entry memleak in xfrm_lookup_route. From Tommi Rantala. 4) Fix a skb leak in case we can't call nlmsg_multicast from xfrm_nlmsg_multicast. From Florian Westphal. 5) Fix a leak of a temporary buffer in the error path of esp6_input. From Zhen Lei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Steffen Klassert says:

====================
pull request (net): ipsec 2018-07-27

1) Fix PMTU handling of vti6. We update the PMTU on
   the xfrm dst_entry which is not cached anymore
   after the flowchache removal. So update the
   PMTU of the original dst_entry instead.
   From Eyal Birger.

2) Fix a leak of kernel memory to userspace.
   From Eric Dumazet.

3) Fix a possible dst_entry memleak in xfrm_lookup_route.
   From Tommi Rantala.

4) Fix a skb leak in case we can't call nlmsg_multicast
   from xfrm_nlmsg_multicast. From Florian Westphal.

5) Fix a leak of a temporary buffer in the error path of
   esp6_input. From Zhen Lei.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull 2018-07-24T23:35:58+00:00 Willem de Bruijn willemb@google.com 2018-07-23T23:36:48+00:00 2efd4fca703a6707cad16ab486eaab8fc7f0fd49 Syzbot reported a read beyond the end of the skb head when returning IPV6_ORIGDSTADDR: BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242 CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261 copy_to_user include/linux/uaccess.h:184 [inline] put_cmsg+0x5ef/0x860 net/core/scm.c:242 ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719 ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733 rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521 [..] This logic and its ipv4 counterpart read the destination port from the packet at skb_transport_offset(skb) + 4. With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a packet that stores headers exactly up to skb_transport_offset(skb) in the head and the remainder in a frag. Call pskb_may_pull before accessing the pointer to ensure that it lies in skb head. Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Syzbot reported a read beyond the end of the skb head when returning
IPV6_ORIGDSTADDR:

  BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242
  CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x185/0x1d0 lib/dump_stack.c:113
    kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125
    kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219
    kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261
    copy_to_user include/linux/uaccess.h:184 [inline]
    put_cmsg+0x5ef/0x860 net/core/scm.c:242
    ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719
    ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733
    rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521
    [..]

This logic and its ipv4 counterpart read the destination port from
the packet at skb_transport_offset(skb) + 4.

With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a
packet that stores headers exactly up to skb_transport_offset(skb) in
the head and the remainder in a frag.

Call pskb_may_pull before accessing the pointer to ensure that it lies
in skb head.

Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com
Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip: hash fragments consistently 2018-07-23T18:39:30+00:00 Paolo Abeni pabeni@redhat.com 2018-07-23T14:50:48+00:00 3dd1c9a1270736029ffca670e9bd0265f4120600 The skb hash for locally generated ip[v6] fragments belonging to the same datagram can vary in several circumstances: * for connected UDP[v6] sockets, the first fragment get its hash via set_owner_w()/skb_set_hash_from_sk() * for unconnected IPv6 UDPv6 sockets, the first fragment can get its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if auto_flowlabel is enabled For the following frags the hash is usually computed via skb_get_hash(). The above can cause OoO for unconnected IPv6 UDPv6 socket: in that scenario the egress tx queue can be selected on a per packet basis via the skb hash. It may also fool flow-oriented schedulers to place fragments belonging to the same datagram in different flows. Fix the issue by copying the skb hash from the head frag into the others at fragmentation time. Before this commit: perf probe -a "dev_queue_xmit skb skb->hash skb->l4_hash:b1@0/8 skb->sw_hash:b1@1/8" netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n & perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1 perf script probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=3713014309 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0 After this commit: probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 Fixes: b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf on xmit") Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The skb hash for locally generated ip[v6] fragments belonging
to the same datagram can vary in several circumstances:
* for connected UDP[v6] sockets, the first fragment get its hash
  via set_owner_w()/skb_set_hash_from_sk()
* for unconnected IPv6 UDPv6 sockets, the first fragment can get
  its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if
  auto_flowlabel is enabled

For the following frags the hash is usually computed via
skb_get_hash().
The above can cause OoO for unconnected IPv6 UDPv6 socket: in that
scenario the egress tx queue can be selected on a per packet basis
via the skb hash.
It may also fool flow-oriented schedulers to place fragments belonging
to the same datagram in different flows.

Fix the issue by copying the skb hash from the head frag into
the others at fragmentation time.

Before this commit:
perf probe -a "dev_queue_xmit skb skb->hash skb->l4_hash:b1@0/8 skb->sw_hash:b1@1/8"
netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n &
perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1
perf script
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=3713014309 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0

After this commit:
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0

Fixes: b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf on xmit")
Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: use fib6_info_hold_safe() when necessary 2018-07-23T18:19:02+00:00 Wei Wang weiwan@google.com 2018-07-22T03:56:32+00:00 e873e4b9cc7e8ce79e5c5627b32b107035bb3f5d In the code path where only rcu read lock is held, e.g. in the route lookup code path, it is not safe to directly call fib6_info_hold() because the fib6_info may already have been deleted but still exists in the rcu grace period. Holding reference to it could cause double free and crash the kernel. This patch adds a new function fib6_info_hold_safe() and replace fib6_info_hold() in all necessary places. Syzbot reported 3 crash traces because of this. One of them is: 8021q: adding VLAN 0 to HW filter on device team0 IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready dst_release: dst:(____ptrval____) refcnt:-1 dst_release: dst:(____ptrval____) refcnt:-2 WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 dst_hold include/net/dst.h:239 [inline] WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204 dst_release: dst:(____ptrval____) refcnt:-1 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 4845 Comm: syz-executor493 Not tainted 4.18.0-rc3+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 panic+0x238/0x4e7 kernel/panic.c:184 dst_release: dst:(____ptrval____) refcnt:-2 dst_release: dst:(____ptrval____) refcnt:-3 __warn.cold.8+0x163/0x1ba kernel/panic.c:536 dst_release: dst:(____ptrval____) refcnt:-4 report_bug+0x252/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x1fc/0x4d0 arch/x86/kernel/traps.c:296 dst_release: dst:(____ptrval____) refcnt:-5 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:316 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992 RIP: 0010:dst_hold include/net/dst.h:239 [inline] RIP: 0010:ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204 Code: c1 ed 03 89 9d 18 ff ff ff 48 b8 00 00 00 00 00 fc ff df 41 c6 44 05 00 f8 e9 2d 01 00 00 4c 8b a5 c8 fe ff ff e8 1a f6 e6 fa <0f> 0b e9 6a fc ff ff e8 0e f6 e6 fa 48 8b 85 d0 fe ff ff 48 8d 78 RSP: 0018:ffff8801a8fcf178 EFLAGS: 00010293 RAX: ffff8801a8eba5c0 RBX: 0000000000000000 RCX: ffffffff869511e6 RDX: 0000000000000000 RSI: ffffffff869515b6 RDI: 0000000000000005 RBP: ffff8801a8fcf2c8 R08: ffff8801a8eba5c0 R09: ffffed0035ac8338 R10: ffffed0035ac8338 R11: ffff8801ad6419c3 R12: ffff8801a8fcf720 R13: ffff8801a8fcf6a0 R14: ffff8801ad6419c0 R15: ffff8801ad641980 ip6_make_skb+0x2c8/0x600 net/ipv6/ip6_output.c:1768 udpv6_sendmsg+0x2c90/0x35f0 net/ipv6/udp.c:1376 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:641 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:651 ___sys_sendmsg+0x51d/0x930 net/socket.c:2125 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2220 __do_sys_sendmmsg net/socket.c:2249 [inline] __se_sys_sendmmsg net/socket.c:2246 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2246 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446ba9 Code: e8 cc bb 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb39a469da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000006dcc54 RCX: 0000000000446ba9 RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003 RBP: 00000000006dcc50 R08: 00007fb39a46a700 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 45c828efc7a64843 R13: e6eeb815b9d8a477 R14: 5068caf6f713c6fc R15: 0000000000000001 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: syzbot+902e2a1bcd4f7808cef5@syzkaller.appspotmail.com Reported-by: syzbot+8ae62d67f647abeeceb9@syzkaller.appspotmail.com Reported-by: syzbot+3f08feb14086930677d0@syzkaller.appspotmail.com Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
In the code path where only rcu read lock is held, e.g. in the route
lookup code path, it is not safe to directly call fib6_info_hold()
because the fib6_info may already have been deleted but still exists
in the rcu grace period. Holding reference to it could cause double
free and crash the kernel.

This patch adds a new function fib6_info_hold_safe() and replace
fib6_info_hold() in all necessary places.

Syzbot reported 3 crash traces because of this. One of them is:
8021q: adding VLAN 0 to HW filter on device team0
IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
dst_release: dst:(____ptrval____) refcnt:-1
dst_release: dst:(____ptrval____) refcnt:-2
WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 dst_hold include/net/dst.h:239 [inline]
WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204
dst_release: dst:(____ptrval____) refcnt:-1
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 4845 Comm: syz-executor493 Not tainted 4.18.0-rc3+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 panic+0x238/0x4e7 kernel/panic.c:184
dst_release: dst:(____ptrval____) refcnt:-2
dst_release: dst:(____ptrval____) refcnt:-3
 __warn.cold.8+0x163/0x1ba kernel/panic.c:536
dst_release: dst:(____ptrval____) refcnt:-4
 report_bug+0x252/0x2d0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:178 [inline]
 do_error_trap+0x1fc/0x4d0 arch/x86/kernel/traps.c:296
dst_release: dst:(____ptrval____) refcnt:-5
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:316
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992
RIP: 0010:dst_hold include/net/dst.h:239 [inline]
RIP: 0010:ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204
Code: c1 ed 03 89 9d 18 ff ff ff 48 b8 00 00 00 00 00 fc ff df 41 c6 44 05 00 f8 e9 2d 01 00 00 4c 8b a5 c8 fe ff ff e8 1a f6 e6 fa <0f> 0b e9 6a fc ff ff e8 0e f6 e6 fa 48 8b 85 d0 fe ff ff 48 8d 78
RSP: 0018:ffff8801a8fcf178 EFLAGS: 00010293
RAX: ffff8801a8eba5c0 RBX: 0000000000000000 RCX: ffffffff869511e6
RDX: 0000000000000000 RSI: ffffffff869515b6 RDI: 0000000000000005
RBP: ffff8801a8fcf2c8 R08: ffff8801a8eba5c0 R09: ffffed0035ac8338
R10: ffffed0035ac8338 R11: ffff8801ad6419c3 R12: ffff8801a8fcf720
R13: ffff8801a8fcf6a0 R14: ffff8801ad6419c0 R15: ffff8801ad641980
 ip6_make_skb+0x2c8/0x600 net/ipv6/ip6_output.c:1768
 udpv6_sendmsg+0x2c90/0x35f0 net/ipv6/udp.c:1376
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:641 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:651
 ___sys_sendmsg+0x51d/0x930 net/socket.c:2125
 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2220
 __do_sys_sendmmsg net/socket.c:2249 [inline]
 __se_sys_sendmmsg net/socket.c:2246 [inline]
 __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2246
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446ba9
Code: e8 cc bb 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fb39a469da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000006dcc54 RCX: 0000000000446ba9
RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003
RBP: 00000000006dcc50 R08: 00007fb39a46a700 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 45c828efc7a64843
R13: e6eeb815b9d8a477 R14: 5068caf6f713c6fc R15: 0000000000000001
Dumping ftrace buffer:
   (ftrace buffer empty)
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
Reported-by: syzbot+902e2a1bcd4f7808cef5@syzkaller.appspotmail.com
Reported-by: syzbot+8ae62d67f647abeeceb9@syzkaller.appspotmail.com
Reported-by: syzbot+3f08feb14086930677d0@syzkaller.appspotmail.com
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
multicast: do not restore deleted record source filter mode to new one 2018-07-22T05:58:17+00:00 Hangbin Liu liuhangbin@gmail.com 2018-07-20T06:04:27+00:00 08d3ffcc0cfaba36f6b86fd568cc3bc773061fa6 There are two scenarios that we will restore deleted records. The first is when device down and up(or unmap/remap). In this scenario the new filter mode is same with previous one. Because we get it from in_dev->mc_list and we do not touch it during device down and up. The other scenario is when a new socket join a group which was just delete and not finish sending status reports. In this scenario, we should use the current filter mode instead of restore old one. Here are 4 cases in total. old_socket new_socket before_fix after_fix IN(A) IN(A) ALLOW(A) ALLOW(A) IN(A) EX( ) TO_IN( ) TO_EX( ) EX( ) IN(A) TO_EX( ) ALLOW(A) EX( ) EX( ) TO_EX( ) TO_EX( ) Fixes: 24803f38a5c0b (igmp: do not remove igmp souce list info when set link down) Fixes: 1666d49e1d416 (mld: do not remove mld souce list info when set link down) Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
There are two scenarios that we will restore deleted records. The first is
when device down and up(or unmap/remap). In this scenario the new filter
mode is same with previous one. Because we get it from in_dev->mc_list and
we do not touch it during device down and up.

The other scenario is when a new socket join a group which was just delete
and not finish sending status reports. In this scenario, we should use the
current filter mode instead of restore old one. Here are 4 cases in total.

old_socket        new_socket       before_fix       after_fix
  IN(A)             IN(A)           ALLOW(A)         ALLOW(A)
  IN(A)             EX( )           TO_IN( )         TO_EX( )
  EX( )             IN(A)           TO_EX( )         ALLOW(A)
  EX( )             EX( )           TO_EX( )         TO_EX( )

Fixes: 24803f38a5c0b (igmp: do not remove igmp souce list info when set link down)
Fixes: 1666d49e1d416 (mld: do not remove mld souce list info when set link down)
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv6: Fix linklocal to global address with VRF 2018-07-22T02:31:46+00:00 David Ahern dsahern@gmail.com 2018-07-19T19:41:18+00:00 24b711edfc34bc45777a3f068812b7d1ed004a5d Example setup: host: ip -6 addr add dev eth1 2001:db8:104::4 where eth1 is enslaved to a VRF switch: ip -6 ro add 2001:db8:104::4/128 dev br1 where br1 only has an LLA ping6 2001:db8:104::4 ssh 2001:db8:104::4 (NOTE: UDP works fine if the PKTINFO has the address set to the global address and ifindex is set to the index of eth1 with a destination an LLA). For ICMP, icmp6_iif needs to be updated to check if skb->dev is an L3 master. If it is then return the ifindex from rt6i_idev similar to what is done for loopback. For TCP, restore the original tcp_v6_iif definition which is needed in most places and add a new tcp_v6_iif_l3_slave that considers the l3_slave variability. This latter check is only needed for socket lookups. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Example setup:
    host: ip -6 addr add dev eth1 2001:db8:104::4
           where eth1 is enslaved to a VRF

    switch: ip -6 ro add 2001:db8:104::4/128 dev br1
            where br1 only has an LLA

           ping6 2001:db8:104::4
           ssh   2001:db8:104::4

(NOTE: UDP works fine if the PKTINFO has the address set to the global
address and ifindex is set to the index of eth1 with a destination an
LLA).

For ICMP, icmp6_iif needs to be updated to check if skb->dev is an
L3 master. If it is then return the ifindex from rt6i_idev similar
to what is done for loopback.

For TCP, restore the original tcp_v6_iif definition which is needed in
most places and add a new tcp_v6_iif_l3_slave that considers the
l3_slave variability. This latter check is only needed for socket
lookups.

Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>