linux-stable.git/net/ipv6, branch v3.18.35

ipv6: drop frames with attached skb->sk in forwarding

2016-03-14T20:55:13+00:00

[ Upstream commit 9ef2e965e55481a52d6d91ce61977a27836268d3 ]

This is a clone of commit 2ab957492d13b ("ip_forward: Drop frames with
attached skb->sk") for ipv6.

This commit has exactly the same reasons as the above mentioned commit,
namely to prevent panics during netfilter reload or a misconfigured stack.

Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

Correct backport for ip6_gre: release cached dst on tunnel removal

2016-03-14T14:07:28+00:00

There was an error in the backport, which is now fixed.

Reported-by: Francesco Ruggeri 
Signed-off-by: Sasha Levin

xfrm: dst_entries_init() per-net dst_ops

2016-02-15T20:42:46+00:00

[ Upstream commit a8a572a6b5f2a79280d6e302cb3c1cb1fbaeb3e8 ]

Remove the dst_entries_init/destroy calls for xfrm4 and xfrm6 dst_ops
templates; their dst_entries counters will never be used.  Move the
xfrm dst_ops initialization from the common xfrm/xfrm_policy.c to
xfrm4/xfrm4_policy.c and xfrm6/xfrm6_policy.c, and call dst_entries_init
and dst_entries_destroy for each net namespace.

The ipv4 and ipv6 xfrms each create dst_ops template, and perform
dst_entries_init on the templates.  The template values are copied to each
net namespace's xfrm.xfrm*_dst_ops.  The problem there is the dst_ops
pcpuc_entries field is a percpu counter and cannot be used correctly by
simply copying it to another object.

The result of this is a very subtle bug; changes to the dst entries
counter from one net namespace may sometimes get applied to a different
net namespace dst entries counter.  This is because of how the percpu
counter works; it has a main count field as well as a pointer to the
percpu variables.  Each net namespace maintains its own main count
variable, but all point to one set of percpu variables.  When any net
namespace happens to change one of the percpu variables to outside its
small batch range, its count is moved to the net namespace's main count
variable.  So with multiple net namespaces operating concurrently, the
dst_ops entries counter can stray from the actual value that it should
be; if counts are consistently moved from one net namespace to another
(which my testing showed is likely), then one net namespace winds up
with a negative dst_ops count while another winds up with a continually
increasing count, eventually reaching its gc_thresh limit, which causes
all new traffic on the net namespace to fail with -ENOBUFS.

Signed-off-by: Dan Streetman 
Signed-off-by: Dan Streetman 
Signed-off-by: Steffen Klassert 
Signed-off-by: Sasha Levin

ipv6: update skb->csum when CE mark is propagated

2016-02-15T20:42:44+00:00

[ Upstream commit 34ae6a1aa0540f0f781dd265366036355fdc8930 ]

When a tunnel decapsulates the outer header, it has to comply
with RFC 6080 and eventually propagate CE mark into inner header.

It turns out IP6_ECN_set_ce() does not correctly update skb->csum
for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure"
messages and stack traces.

Signed-off-by: Eric Dumazet 
Acked-by: Herbert Xu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ipv6: tcp: add rcu locking in tcp_v6_send_synack()

2016-02-15T20:42:44+00:00

[ Upstream commit 3e4006f0b86a5ae5eb0e8215f9a9e1db24506977 ]

When first SYNACK is sent, we already hold rcu_read_lock(), but this
is not true if a SYNACK is retransmitted, as a timer (soft) interrupt
does not hold rcu_read_lock()

Fixes: 45f6fad84cc30 ("ipv6: add complete rcu protection around np->opt")
Reported-by: Dave Jones 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ipv6/addrlabel: fix ip6addrlbl_get()

2016-02-15T20:42:42+00:00

[ Upstream commit e459dfeeb64008b2d23bdf600f03b3605dbb8152 ]

ip6addrlbl_get() has never worked. If ip6addrlbl_hold() succeeded,
ip6addrlbl_get() will exit with '-ESRCH'. If ip6addrlbl_hold() failed,
ip6addrlbl_get() will use about to be free ip6addrlbl_entry pointer.

Fix this by inverting ip6addrlbl_hold() check.

Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.")
Signed-off-by: Andrey Ryabinin 
Reviewed-by: Cong Wang 
Acked-by: YOSHIFUJI Hideaki 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: fix IP early demux races

2016-01-15T23:41:51+00:00

[ Upstream commit 5037e9ef9454917b047f9f3a19b4dd179fbf7cd4 ]

David Wilder reported crashes caused by dst reuse.


  I am seeing a crash on a distro V4.2.3 kernel caused by a double
  release of a dst_entry.  In ipv4_dst_destroy() the call to
  list_empty() finds a poisoned next pointer, indicating the dst_entry
  has already been removed from the list and freed. The crash occurs
  18 to 24 hours into a run of a network stress exerciser.


Thanks to his detailed report and analysis, we were able to understand
the core issue.

IP early demux can associate a dst to skb, after a lookup in TCP/UDP
sockets.

When socket cache is not properly set, we want to store into
sk->sk_dst_cache the dst for future IP early demux lookups,
by acquiring a stable refcount on the dst.

Problem is this acquisition is simply using an atomic_inc(),
which works well, unless the dst was queued for destruction from
dst_release() noticing dst refcount went to zero, if DST_NOCACHE
was set on dst.

We need to make sure current refcount is not zero before incrementing
it, or risk double free as David reported.

This patch, being a stable candidate, adds two new helpers, and use
them only from IP early demux problematic paths.

It might be possible to merge in net-next skb_dst_force() and
skb_dst_force_safe(), but I prefer having the smallest patch for stable
kernels : Maybe some skb_dst_force() callers do not expect skb->dst
can suddenly be cleared.

Can probably be backported back to linux-3.6 kernels

Reported-by: David J. Wilder 
Tested-by: David J. Wilder 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: add validation for the socket syscall protocol argument

2016-01-15T23:41:51+00:00

[ Upstream commit 79462ad02e861803b3840cc782248c7359451cd9 ]

郭永刚 reported that one could simply crash the kernel as root by
using a simple program:

	int socket_fd;
	struct sockaddr_in addr;
	addr.sin_port = 0;
	addr.sin_addr.s_addr = INADDR_ANY;
	addr.sin_family = 10;

	socket_fd = socket(10,3,0x40000000);
	connect(socket_fd , &addr,16);

AF_INET, AF_INET6 sockets actually only support 8-bit protocol
identifiers. inet_sock's skc_protocol field thus is sized accordingly,
thus larger protocol identifiers simply cut off the higher bits and
store a zero in the protocol fields.

This could lead to e.g. NULL function pointer because as a result of
the cut off inet_num is zero and we call down to inet_autobind, which
is NULL for raw sockets.

kernel: Call Trace:
kernel:  [] ? inet_autobind+0x2e/0x70
kernel:  [] inet_dgram_connect+0x54/0x80
kernel:  [] SYSC_connect+0xd9/0x110
kernel:  [] ? ptrace_notify+0x5b/0x80
kernel:  [] ? syscall_trace_enter_phase2+0x108/0x200
kernel:  [] SyS_connect+0xe/0x10
kernel:  [] tracesys_phase2+0x84/0x89

I found no particular commit which introduced this problem.

CVE: CVE-2015-8543
Cc: Cong Wang 
Reported-by: 郭永刚 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

gre6: allow to update all parameters via rtnl

2016-01-15T23:41:50+00:00

[ Upstream commit 6a61d4dbf4f54b5683e0f1e58d873cecca7cb977 ]

Parameters were updated only if the kernel was unable to find the tunnel
with the new parameters, ie only if core pamareters were updated (keys,
addr, link, type).
Now it's possible to update ttl, hoplimit, flowinfo and flags.

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Nicolas Dichtel 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ipv6: add complete rcu protection around np->opt

2015-12-14T17:19:26+00:00

[ Upstream commit 45f6fad84cc305103b28d73482b344d7f5b76f39 ]

This patch addresses multiple problems :

UDP/RAW sendmsg() need to get a stable struct ipv6_txoptions
while socket is not locked : Other threads can change np->opt
concurrently. Dmitry posted a syzkaller
(http://github.com/google/syzkaller) program desmonstrating
use-after-free.

Starting with TCP/DCCP lockless listeners, tcp_v6_syn_recv_sock()
and dccp_v6_request_recv_sock() also need to use RCU protection
to dereference np->opt once (before calling ipv6_dup_options())

This patch adds full RCU protection to np->opt

Reported-by: Dmitry Vyukov 
Signed-off-by: Eric Dumazet 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin