linux-stable.git/net/ipv6, branch v3.14.63

ipv6: addrconf: validate new MTU before applying it

2016-03-03T23:06:46+00:00

commit 77751427a1ff25b27d47a4c36b12c3c8667855ac upstream.

Currently we don't check if the new MTU is valid or not and this allows
one to configure a smaller than minimum allowed by RFCs or even bigger
than interface own MTU, which is a problem as it may lead to packet
drops.

If you have a daemon like NetworkManager running, this may be exploited
by remote attackers by forging RA packets with an invalid MTU, possibly
leading to a DoS. (NetworkManager currently only validates for values
too small, but not for too big ones.)

The fix is just to make sure the new value is valid. That is, between
IPV6_MIN_MTU and interface's MTU.

Note that similar check is already performed at
ndisc_router_discovery(), for when kernel itself parses the RA.

Signed-off-by: Marcelo Ricardo Leitner 
Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller 
Cc: "Charles (Chas) Williams" <3chas3@gmail.com>
Signed-off-by: Greg Kroah-Hartman

netfilter: ip6t_SYNPROXY: fix NULL pointer dereference

2016-03-03T23:06:44+00:00

commit 96fffb4f23f124f297d51dedc9cf51d19eb88ee1 upstream.

This happens when networking namespaces are enabled.

Suggested-by: Patrick McHardy 
Signed-off-by: Phil Sutter 
Acked-by: Patrick McHardy 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

ip6mr: call del_timer_sync() in ip6mr_free_table()

2016-02-25T19:58:56+00:00

commit 7ba0c47c34a1ea5bc7a24ca67309996cce0569b5 upstream.

We need to wait for the flying timers, since we
are going to free the mrtable right after it.

Cc: Hannes Frederic Sowa 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

ipv6: update skb->csum when CE mark is propagated

2016-01-29T05:57:12+00:00

[ Upstream commit 34ae6a1aa0540f0f781dd265366036355fdc8930 ]

When a tunnel decapsulates the outer header, it has to comply
with RFC 6080 and eventually propagate CE mark into inner header.

It turns out IP6_ECN_set_ce() does not correctly update skb->csum
for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure"
messages and stack traces.

Signed-off-by: Eric Dumazet 
Acked-by: Herbert Xu 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6/addrlabel: fix ip6addrlbl_get()

2016-01-29T05:57:10+00:00

[ Upstream commit e459dfeeb64008b2d23bdf600f03b3605dbb8152 ]

ip6addrlbl_get() has never worked. If ip6addrlbl_hold() succeeded,
ip6addrlbl_get() will exit with '-ESRCH'. If ip6addrlbl_hold() failed,
ip6addrlbl_get() will use about to be free ip6addrlbl_entry pointer.

Fix this by inverting ip6addrlbl_hold() check.

Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.")
Signed-off-by: Andrey Ryabinin 
Reviewed-by: Cong Wang 
Acked-by: YOSHIFUJI Hideaki 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: add validation for the socket syscall protocol argument

2016-01-23T04:34:53+00:00

[ Upstream commit 79462ad02e861803b3840cc782248c7359451cd9 ]

郭永刚 reported that one could simply crash the kernel as root by
using a simple program:

	int socket_fd;
	struct sockaddr_in addr;
	addr.sin_port = 0;
	addr.sin_addr.s_addr = INADDR_ANY;
	addr.sin_family = 10;

	socket_fd = socket(10,3,0x40000000);
	connect(socket_fd , &addr,16);

AF_INET, AF_INET6 sockets actually only support 8-bit protocol
identifiers. inet_sock's skc_protocol field thus is sized accordingly,
thus larger protocol identifiers simply cut off the higher bits and
store a zero in the protocol fields.

This could lead to e.g. NULL function pointer because as a result of
the cut off inet_num is zero and we call down to inet_autobind, which
is NULL for raw sockets.

kernel: Call Trace:
kernel:  [] ? inet_autobind+0x2e/0x70
kernel:  [] inet_dgram_connect+0x54/0x80
kernel:  [] SYSC_connect+0xd9/0x110
kernel:  [] ? ptrace_notify+0x5b/0x80
kernel:  [] ? syscall_trace_enter_phase2+0x108/0x200
kernel:  [] SyS_connect+0xe/0x10
kernel:  [] tracesys_phase2+0x84/0x89

I found no particular commit which introduced this problem.

CVE: CVE-2015-8543
Cc: Cong Wang 
Reported-by: 郭永刚 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

gre6: allow to update all parameters via rtnl

2016-01-23T04:34:52+00:00

[ Upstream commit 6a61d4dbf4f54b5683e0f1e58d873cecca7cb977 ]

Parameters were updated only if the kernel was unable to find the tunnel
with the new parameters, ie only if core pamareters were updated (keys,
addr, link, type).
Now it's possible to update ttl, hoplimit, flowinfo and flags.

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Nicolas Dichtel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: distinguish frag queues by device for multicast and link-local packets

2016-01-23T04:34:49+00:00

[ Upstream commit 264640fc2c5f4f913db5c73fa3eb1ead2c45e9d7 ]

If a fragmented multicast packet is received on an ethernet device which
has an active macvlan on top of it, each fragment is duplicated and
received both on the underlying device and the macvlan. If some
fragments for macvlan are processed before the whole packet for the
underlying device is reassembled, the "overlapping fragments" test in
ip6_frag_queue() discards the whole fragment queue.

To resolve this, add device ifindex to the search key and require it to
match reassembling multicast packets and packets to link-local
addresses.

Note: similar patch has been already submitted by Yoshifuji Hideaki in

  http://patchwork.ozlabs.org/patch/220979/

but got lost and forgotten for some reason.

Signed-off-by: Michal Kubecek 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ip6mr: fix static mfc/dev leaks on table destruction

2016-01-23T04:34:48+00:00

[ Upstream commit 4c6980462f32b4f282c5d8e5f7ea8070e2937725 ]

Similar to ipv4, when destroying an mrt table the static mfc entries and
the static devices are kept, which leads to devices that can never be
destroyed (because of refcnt taken) and leaked memory. Make sure that
everything is cleaned up on netns destruction.

Fixes: 8229efdaef1e ("netns: ip6mr: enable namespace support in ipv6 multicast forwarding code")
CC: Benjamin Thery 
Signed-off-by: Nikolay Aleksandrov 
Reviewed-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

snmp: Remove duplicate OUTMCAST stat increment

2016-01-23T04:34:47+00:00

[ Upstream commit 41033f029e393a64e81966cbe34d66c6cf8a2e7e ]

the OUTMCAST stat is double incremented, getting bumped once in the mcast code
itself, and again in the common ip output path.  Remove the mcast bump, as its
not needed

Validated by the reporter, with good results

Signed-off-by: Neil Horman 
Reported-by: Claus Jensen 
CC: Claus Jensen 
CC: David Miller 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman