linux-stable.git/net/ipv6, branch v3.12.64

net: disable fragment reassembly if high_thresh is set to zero

2016-09-29T09:14:19+00:00

commit 30759219f562cfaaebe7b9c1d1c0e6b5445c69b0 upstream.

Before commit 6d7b857d541e ("net: use lib/percpu_counter API for
fragmentation mem accounting"), setting high threshold to 0 prevented
fragment reassembly as first fragment would be always evicted before
second could be added to the queue. While inefficient, some users
apparently relied on it.

Since the commit mentioned above, a percpu counter is used for
reassembly memory accounting and high batch size avoids taking slow path
in most common scenarios. As a result, a whole full sized packet can be
reassembled without the percpu counter's main counter changing its
value so that even with high_thresh set to 0, fragmented packets can be
still reassembled and processed.

Add explicit checks preventing reassembly if high threshold is zero.

[mk] backport to 3.12

Signed-off-by: Michal Kubecek 
Signed-off-by: Jiri Slaby

ipv6: release dst in ping_v6_sendmsg

2016-09-29T09:14:11+00:00

[ Upstream commit 03c2778a938aaba0893f6d6cdc29511d91a79848 ]

Neither the failure or success paths of ping_v6_sendmsg release
the dst it acquires.  This leads to a flood of warnings from
"net/core/dst.c:288 dst_release" on older kernels that
don't have 8bf4ada2e21378816b28205427ee6b0e1ca4c5f1 backported.

That patch optimistically hoped this had been fixed post 3.10, but
it seems at least one case wasn't, where I've seen this triggered
a lot from machines doing unprivileged icmp sockets.

Cc: Martin Lau 
Signed-off-by: Dave Jones 
Acked-by: Martin KaFai Lau 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

tcp: properly scale window in tcp_v[46]_reqsk_send_ack()

2016-09-29T09:14:09+00:00

[ Upstream commit 20a2b49fc538540819a0c552877086548cff8d8d ]

When sending an ack in SYN_RECV state, we must scale the offered
window if wscale option was negotiated and accepted.

Tested:
 Following packetdrill test demonstrates the issue :

0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0

+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0

// Establish a connection.
+0 < S 0:0(0) win 20000 
+0 > S. 0:0(0) ack 1 win 28960 

+0 < . 1:11(10) ack 1 win 156 
// check that window is properly scaled !
+0 > . 1:1(0) ack 1 win 226 

Signed-off-by: Eric Dumazet 
Cc: Yuchung Cheng 
Cc: Neal Cardwell 
Acked-by: Yuchung Cheng 
Acked-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

netfilter: x_tables: speed up jump target validation

2016-08-19T07:50:44+00:00

commit f4dc77713f8016d2e8a3295e1c9c53a21f296def upstream.

The dummy ruleset I used to test the original validation change was broken,
most rules were unreachable and were not tested by mark_source_chains().

In some cases rulesets that used to load in a few seconds now require
several minutes.

sample ruleset that shows the behaviour:

echo "*filter"
for i in $(seq 0 100000);do
        printf ":chain_%06x - [0:0]\n" $i
done
for i in $(seq 0 100000);do
   printf -- "-A INPUT -j chain_%06x\n" $i
   printf -- "-A INPUT -j chain_%06x\n" $i
   printf -- "-A INPUT -j chain_%06x\n" $i
done
echo COMMIT

[ pipe result into iptables-restore ]

This ruleset will be about 74mbyte in size, with ~500k searches
though all 500k[1] rule entries. iptables-restore will take forever
(gave up after 10 minutes)

Instead of always searching the entire blob for a match, fill an
array with the start offsets of every single ipt_entry struct,
then do a binary search to check if the jump target is present or not.

After this change ruleset restore times get again close to what one
gets when reverting 36472341017529e (~3 seconds on my workstation).

[1] every user-defined rule gets an implicit RETURN, so we get
300k jumps + 100k userchains + 100k returns -> 500k rule entries

Fixes: 36472341017529e ("netfilter: x_tables: validate targets of jumps")
Reported-by: Jeff Wu 
Tested-by: Jeff Wu 
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Jiri Slaby

netfilter: x_tables: validate targets of jumps

2016-07-22T08:17:01+00:00

commit 36472341017529e2b12573093cc0f68719300997 upstream.

When we see a jump also check that the offset gets us to beginning of
a rule (an ipt_entry).

The extra overhead is negible, even with absurd cases.

300k custom rules, 300k jumps to 'next' user chain:
[ plus one jump from INPUT to first userchain ]:

Before:
real    0m24.874s
user    0m7.532s
sys     0m16.076s

After:
real    0m27.464s
user    0m7.436s
sys     0m18.840s

Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Jiri Slaby

ipmr/ip6mr: Initialize the last assert time of mfc entries.

2016-07-21T06:35:55+00:00

[ Upstream commit 70a0dec45174c976c64b4c8c1d0898581f759948 ]

This fixes wrong-interface signaling on 32-bit platforms for entries
created when jiffies > 2^31 + MFC_ASSERT_THRESH.

Signed-off-by: Tom Goff 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

sit: correct IP protocol used in ipip6_err

2016-07-21T06:35:55+00:00

[ Upstream commit d5d8760b78d0cfafe292f965f599988138b06a70 ]

Since 32b8a8e59c9c ("sit: add IPv4 over IPv4 support")
ipip6_err() may be called for packets whose IP protocol is
IPPROTO_IPIP as well as those whose IP protocol is IPPROTO_IPV6.

In the case of IPPROTO_IPIP packets the correct protocol value is not
passed to ipv4_update_pmtu() or ipv4_redirect().

This patch resolves this problem by using the IP protocol of the packet
rather than a hard-coded value. This appears to be consistent
with the usage of the protocol of a packet by icmp_socket_deliver()
the caller of ipip6_err().

I was able to exercise the redirect case by using a setup where an ICMP
redirect was received for the destination of the encapsulated packet.
However, it appears that although incorrect the protocol field is not used
in this case and thus no problem manifests.  On inspection it does not
appear that a problem will manifest in the fragmentation needed/update pmtu
case either.

In short I believe this is a cosmetic fix. None the less, the use of
IPPROTO_IPV6 seems wrong and confusing.

Reviewed-by: Dinan Gunawardena 
Signed-off-by: Simon Horman 
Acked-by: YOSHIFUJI Hideaki 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

netfilter: x_tables: introduce and use xt_copy_counters_from_user

2016-07-21T06:35:48+00:00

commit d7591f0c41ce3e67600a982bab6989ef0f07b3ce upstream

The three variants use same copy&pasted code, condense this into a
helper and use that.

Make sure info.name is 0-terminated.

Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Jiri Slaby

netfilter: x_tables: do compat validation via translate_table

2016-07-21T06:35:47+00:00

commit 09d9686047dbbe1cf4faa558d3ecc4aae2046054 upstream.

This looks like refactoring, but its also a bug fix.

Problem is that the compat path (32bit iptables, 64bit kernel) lacks a few
sanity tests that are done in the normal path.

For example, we do not check for underflows and the base chain policies.

While its possible to also add such checks to the compat path, its more
copy&pastry, for instance we cannot reuse check_underflow() helper as
e->target_offset differs in the compat case.

Other problem is that it makes auditing for validation errors harder; two
places need to be checked and kept in sync.

At a high level 32 bit compat works like this:
1- initial pass over blob:
   validate match/entry offsets, bounds checking
   lookup all matches and targets
   do bookkeeping wrt. size delta of 32/64bit structures
   assign match/target.u.kernel pointer (points at kernel
   implementation, needed to access ->compatsize etc.)

2- allocate memory according to the total bookkeeping size to
   contain the translated ruleset

3- second pass over original blob:
   for each entry, copy the 32bit representation to the newly allocated
   memory.  This also does any special match translations (e.g.
   adjust 32bit to 64bit longs, etc).

4- check if ruleset is free of loops (chase all jumps)

5-first pass over translated blob:
   call the checkentry function of all matches and targets.

The alternative implemented by this patch is to drop steps 3&4 from the
compat process, the translation is changed into an intermediate step
rather than a full 1:1 translate_table replacement.

In the 2nd pass (step #3), change the 64bit ruleset back to a kernel
representation, i.e. put() the kernel pointer and restore ->u.user.name .

This gets us a 64bit ruleset that is in the format generated by a 64bit
iptables userspace -- we can then use translate_table() to get the
'native' sanity checks.

This has two drawbacks:

1. we re-validate all the match and target entry structure sizes even
though compat translation is supposed to never generate bogus offsets.
2. we put and then re-lookup each match and target.

THe upside is that we get all sanity tests and ruleset validations
provided by the normal path and can remove some duplicated compat code.

iptables-restore time of autogenerated ruleset with 300k chains of form
-A CHAIN0001 -m limit --limit 1/s -j CHAIN0002
-A CHAIN0002 -m limit --limit 1/s -j CHAIN0003

shows no noticeable differences in restore times:
old:   0m30.796s
new:   0m31.521s
64bit: 0m25.674s

Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Jiri Slaby

netfilter: ensure number of counters is >0 in do_replace()

2016-07-21T06:35:47+00:00

commit 1086bbe97a074844188c6c988fa0b1a98c3ccbb9 upstream.

After improving setsockopt() coverage in trinity, I started triggering
vmalloc failures pretty reliably from this code path:

warn_alloc_failed+0xe9/0x140
__vmalloc_node_range+0x1be/0x270
vzalloc+0x4b/0x50
__do_replace+0x52/0x260 [ip_tables]
do_ipt_set_ctl+0x15d/0x1d0 [ip_tables]
nf_setsockopt+0x65/0x90
ip_setsockopt+0x61/0xa0
raw_setsockopt+0x16/0x60
sock_common_setsockopt+0x14/0x20
SyS_setsockopt+0x71/0xd0

It turns out we don't validate that the num_counters field in the
struct we pass in from userspace is initialized.

The same problem also exists in ebtables, arptables, ipv6, and the
compat variants.

Signed-off-by: Dave Jones 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Jiri Slaby