linux-stable.git/net/ipv6, branch linux-2.6.33.y

ipv6: Add GSO support on forwarding path

2011-11-07T21:46:43+00:00

commit 0aa68271510ae2b221d4b60892103837be63afe4 upstream.

Currently we disallow GSO packets on the IPv6 forward path.
This patch fixes this.

Note that I discovered that our existing GSO MTU checks (e.g.,
IPv4 forwarding) are buggy in that they skip the check altogether,
when they really should be checking gso_size + header instead.

I have also been lazy here in that I haven't bothered to segment
the GSO packet by hand before generating an ICMP message.  Someone
should add that to be 100% correct.

Reported-by: Ralf Baechle 
Signed-off-by: Herbert Xu 
Signed-off-by: David S. Miller 
Signed-off-by: Apollon Oikonomopoulos 
Signed-off-by: Faidon Liambotis 
Signed-off-by: Greg Kroah-Hartman

net: Compute protocol sequence numbers and fragment IDs using MD5.

2011-08-16T02:01:54+00:00

Computers have become a lot faster since we compromised on the
partial MD4 hash which we use currently for performance reasons.

MD5 is a much safer choice, and is inline with both RFC1948 and
other ISS generators (OpenBSD, Solaris, etc.)

Furthermore, only having 24-bits of the sequence number be truly
unpredictable is a very serious limitation.  So the periodic
regeneration and 8-bit counter have been removed.  We compute and
use a full 32-bit sequence number.

For ipv6, DCCP was found to use a 32-bit truncated initial sequence
number (it needs 43-bits) and that is fixed here as well.

Reported-by: Dan Kaminsky 
Tested-by: Willy Tarreau 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

netns xfrm: fixup xfrm6_tunnel error propagation

2011-08-08T17:36:08+00:00

commit e924960dacdf85d118a98c7262edf2f99c3015cf upstream.

Signed-off-by: Alexey Dobriyan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

udp/recvmsg: Clear MSG_TRUNC flag when starting over for a new packet

2011-07-13T03:31:27+00:00

[ Upstream commit 9cfaa8def1c795a512bc04f2aec333b03724ca2e ]

Consider this scenario: When the size of the first received udp packet
is bigger than the receive buffer, MSG_TRUNC bit is set in msg->msg_flags.
However, if checksum error happens and this is a blocking socket, it will
goto try_again loop to receive the next packet.  But if the size of the
next udp packet is smaller than receive buffer, MSG_TRUNC flag should not
be set, but because MSG_TRUNC bit is not cleared in msg->msg_flags before
receive the next packet, MSG_TRUNC is still set, which is wrong.

Fix this problem by clearing MSG_TRUNC flag when starting over for a
new packet.

Signed-off-by: Xufeng Zhang 
Signed-off-by: Paul Gortmaker 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6/udp: Use the correct variable to determine non-blocking condition

2011-07-13T03:31:27+00:00

[ Upstream commit 32c90254ed4a0c698caa0794ebb4de63fcc69631 ]

udpv6_recvmsg() function is not using the correct variable to determine
whether or not the socket is in non-blocking operation, this will lead
to unexpected behavior when a UDP checksum error occurs.

Consider a non-blocking udp receive scenario: when udpv6_recvmsg() is
called by sock_common_recvmsg(), MSG_DONTWAIT bit of flags variable in
udpv6_recvmsg() is cleared by "flags & ~MSG_DONTWAIT" in this call:

    err = sk->sk_prot->recvmsg(iocb, sk, msg, size, flags & MSG_DONTWAIT,
                   flags & ~MSG_DONTWAIT, &addr_len);

i.e. with udpv6_recvmsg() getting these values:

	int noblock = flags & MSG_DONTWAIT
	int flags = flags & ~MSG_DONTWAIT

So, when udp checksum error occurs, the execution will go to
csum_copy_err, and then the problem happens:

    csum_copy_err:
            ...............
            if (flags & MSG_DONTWAIT)
                    return -EAGAIN;
            goto try_again;
            ...............

But it will always go to try_again as MSG_DONTWAIT has been cleared
from flags at call time -- only noblock contains the original value
of MSG_DONTWAIT, so the test should be:

            if (noblock)
                    return -EAGAIN;

This is also consistent with what the ipv4/udp code does.

Signed-off-by: Xufeng Zhang 
Signed-off-by: Paul Gortmaker 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

netfilter: IPv6: initialize TOS field in REJECT target module

2011-06-23T22:28:42+00:00

commit 4319cc0cf5bb894b7368008cdf6dd20eb8868018 upstream.

The IPv6 header is not zeroed out in alloc_skb so we must initialize
it properly unless we want to see IPv6 packets with random TOS fields
floating around. The current implementation resets the flow label
but this could be changed if deemed necessary.

We stumbled upon this issue when trying to apply a mangle rule to
the RST packet generated by the REJECT target module.

Signed-off-by: Fernando Luis Vazquez Cao 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

netfilter: nf_conntrack_reasm: properly handle packets fragmented into a single fragment

2011-06-23T22:28:38+00:00

commit 9e2dcf72023d1447f09c47d77c99b0c49659e5ce upstream.

When an ICMPV6_PKT_TOOBIG message is received with a MTU below 1280,
all further packets include a fragment header.

Unlike regular defragmentation, conntrack also needs to "reassemble"
those fragments in order to obtain a packet without the fragment
header for connection tracking. Currently nf_conntrack_reasm checks
whether a fragment has either IP6_MF set or an offset != 0, which
makes it ignore those fragments.

Remove the invalid check and make reassembly handle fragment queues
containing only a single fragment.

Reported-and-tested-by: Ulrich Weber 
Signed-off-by: Patrick McHardy 
Signed-off-by: Greg Kroah-Hartman

ipv6: netfilter: ip6_tables: fix infoleak to userspace

2011-04-14T23:53:05+00:00

commit 6a8ab060779779de8aea92ce3337ca348f973f54 upstream.

Structures ip6t_replace, compat_ip6t_replace, and xt_get_revision are
copied from userspace.  Fields of these structs that are
zero-terminated strings are not checked.  When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.

The first bug was introduced before the git epoch;  the second was
introduced in 3bc3fe5e (v2.6.25-rc1);  the third is introduced by
6b7d31fc (v2.6.15-rc1).  To trigger the bug one should have
CAP_NET_ADMIN.

Signed-off-by: Vasiliy Kulikov 
Signed-off-by: Patrick McHardy 
Signed-off-by: Greg Kroah-Hartman

net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules

2011-03-21T19:45:36+00:00

commit 8909c9ad8ff03611c9c96c9a92656213e4bb495b upstream.

Since a8f80e8ff94ecba629542d9b4b5f5a8ee3eb565c any process with
CAP_NET_ADMIN may load any module from /lib/modules/.  This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**.  However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.

This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases.  This fixes CVE-2011-1019.

Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".

Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.

    root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	fffffff800001000
    CapEff:	fffffff800001000
    CapBnd:	fffffff800001000
    root@albatros:~# modprobe xfs
    FATAL: Error inserting xfs
    (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit
    sit: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit0
    sit0      Link encap:IPv6-in-IPv4
	      NOARP  MTU:1480  Metric:1

    root@albatros:~# lsmod | grep sit
    sit                    10457  0
    tunnel4                 2957  1 sit

For CAP_SYS_MODULE module loading is still relaxed:

    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	ffffffffffffffff
    CapEff:	ffffffffffffffff
    CapBnd:	ffffffffffffffff
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    xfs                   745319  0

Reference: https://lkml.org/lkml/2011/2/24/203

Signed-off-by: Vasiliy Kulikov 
Signed-off-by: Michael Tokarev 
Acked-by: David S. Miller 
Acked-by: Kees Cook 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman

udp: add rehash on connect()

2011-03-21T19:44:10+00:00

commit 719f835853a92f6090258114a72ffe41f09155cd upstream.

commit 30fff923 introduced in linux-2.6.33 (udp: bind() optimisation)
added a secondary hash on UDP, hashed on (local addr, local port).

Problem is that following sequence :

fd = socket(...)
connect(fd, &remote, ...)

not only selects remote end point (address and port), but also sets
local address, while UDP stack stored in secondary hash table the socket
while its local address was INADDR_ANY (or ipv6 equivalent)

Sequence is :
 - autobind() : choose a random local port, insert socket in hash tables
              [while local address is INADDR_ANY]
 - connect() : set remote address and port, change local address to IP
              given by a route lookup.

When an incoming UDP frame comes, if more than 10 sockets are found in
primary hash table, we switch to secondary table, and fail to find
socket because its local address changed.

One solution to this problem is to rehash datagram socket if needed.

We add a new rehash(struct socket *) method in "struct proto", and
implement this method for UDP v4 & v6, using a common helper.

This rehashing only takes care of secondary hash table, since primary
hash (based on local port only) is not changed.

Reported-by: Krzysztof Piotr Oledzki 
Signed-off-by: Eric Dumazet 
Tested-by: Krzysztof Piotr Oledzki 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman