linux-stable.git/net/ipv6/ping.c, branch linux-3.19.y

net: ping: Return EAFNOSUPPORT when appropriate.

2015-03-18T13:10:52+00:00

[ Upstream commit 9145736d4862145684009d6a72a6e61324a9439e ]

1. For an IPv4 ping socket, ping_check_bind_addr does not check
   the family of the socket address that's passed in. Instead,
   make it behave like inet_bind, which enforces either that the
   address family is AF_INET, or that the family is AF_UNSPEC and
   the address is 0.0.0.0.
2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL
   if the socket family is not AF_INET6. Return EAFNOSUPPORT
   instead, for consistency with inet6_bind.
3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT
   instead of EINVAL if an incorrect socket address structure is
   passed in.
4. Make IPv6 ping sockets be IPv6-only. The code does not support
   IPv4, and it cannot easily be made to support IPv4 because
   the protocol numbers for ICMP and ICMPv6 are different. This
   makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead
   of making the socket unusable.

Among other things, this fixes an oops that can be triggered by:

    int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP);
    struct sockaddr_in6 sin6 = {
        .sin6_family = AF_INET6,
        .sin6_addr = in6addr_any,
    };
    bind(s, (struct sockaddr *) &sin6, sizeof(sin6));

Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241
Signed-off-by: Lorenzo Colitti 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

put iov_iter into msghdr

2014-12-09T21:29:03+00:00

Note that the code _using_ ->msg_iter at that point will be very
unhappy with anything other than unshifted iovec-backed iov_iter.
We still need to convert users to proper primitives.

Signed-off-by: Al Viro

net: Eliminate no_check from protosw

2014-05-23T20:28:53+00:00

It doesn't seem like an protocols are setting anything other
than the default, and allowing to arbitrarily disable checksums
for a whole protocol seems dangerous. This can be done on a per
socket basis.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

net: ipv6: Introduce ip6_sk_dst_hoplimit.

2014-04-30T17:31:26+00:00

This replaces 6 identical code snippets with a call to a new
static inline function.

Signed-off-by: Lorenzo Colitti 
Signed-off-by: David S. Miller

ipv6: some ipv6 statistic counters failed to disable bh

2014-03-31T20:38:12+00:00

After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify
processing to workqueue") some counters are now updated in process context
and thus need to disable bh before doing so, otherwise deadlocks can
happen on 32-bit archs. Fabio Estevam noticed this while while mounting
a NFS volume on an ARM board.

As a compensation for missing this I looked after the other *_STATS_BH
and found three other calls which need updating:

1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling)
2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ...
   (only in case of icmp protocol with raw sockets in error handling)
3) ping6_v6_sendmsg (error handling)

Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue")
Reported-by: Fabio Estevam 
Tested-by: Fabio Estevam 
Cc: Eric Dumazet 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

net: ipv6: ping: Use socket mark in routing lookup

2014-02-27T21:08:46+00:00

Signed-off-by: Lorenzo Colitti 
Signed-off-by: David S. Miller

ipv6: protect protocols not handling ipv4 from v4 connection/bind attempts

2014-01-22T00:59:19+00:00

Some ipv6 protocols cannot handle ipv4 addresses, so we must not allow
connecting and binding to them. sendmsg logic does already check msg->name
for this but must trust already connected sockets which could be set up
for connection to ipv4 address family.

Per-socket flag ipv6only is of no use here, as it is under users control
by setsockopt.

Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams

2014-01-20T03:53:18+00:00

We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data
for IPv4 datagrams on IPv6 sockets.

This patch splits the ip6_datagram_recv_ctl into two functions, one
which handles both protocol families, AF_INET and AF_INET6, while the
ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data.

ip6_datagram_recv_*_ctl never reported back any errors, so we can make
them return void. Also provide a helper for protocols which don't offer dual
personality to further use ip6_datagram_recv_ctl, which is exported to
modules.

I needed to shuffle the code for ping around a bit to make it easier to
implement dual personality for ping ipv6 sockets in future.

Reported-by: Gert Doering 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

net: add build-time checks for msg->msg_name size

2014-01-19T07:04:16+00:00

This is a follow-up patch to f3d3342602f8bc ("net: rework recvmsg
handler msg_name and msg_namelen logic").

DECLARE_SOCKADDR validates that the structure we use for writing the
name information to is not larger than the buffer which is reserved
for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR
consistently in sendmsg code paths.

Signed-off-by: Steffen Hurrle 
Suggested-by: Hannes Frederic Sowa 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

net: Remove FLOWI_FLAG_CAN_SLEEP

2013-12-06T06:24:39+00:00

FLOWI_FLAG_CAN_SLEEP was used to notify xfrm about the posibility
to sleep until the needed states are resolved. This code is gone,
so FLOWI_FLAG_CAN_SLEEP is not needed anymore.

Signed-off-by: Steffen Klassert