linux-stable.git/net/ipv4, branch v5.4.83

ipv4: Fix tos mask in inet_rtm_getroute()

2020-12-08T09:40:25+00:00

[ Upstream commit 1ebf179037cb46c19da3a9c1e2ca16e7a754b75e ]

When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.

As a result, "ip route get" can return a different route than what
would be used when sending real packets.

For example:

    $ ip route add 192.0.2.11/32 dev eth0
    $ ip route add unreachable 192.0.2.11/32 tos 2
    $ ip route get 192.0.2.11 tos 2
    RTNETLINK answers: No route to host

But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:

    $ ping -c 1 -Q 2 192.0.2.11
    PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
    64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms

    --- 192.0.2.11 ping statistics ---
    1 packets transmitted, 1 received, 0% packet loss, time 0ms
    rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms

This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.

Fixes: 3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

tcp: Set INET_ECN_xmit configuration in tcp_reinit_congestion_control

2020-12-08T09:40:24+00:00

[ Upstream commit 55472017a4219ca965a957584affdb17549ae4a4 ]

When setting congestion control via a BPF program it is seen that the
SYN/ACK for packets within a given flow will not include the ECT0 flag. A
bit of simple printk debugging shows that when this is configured without
BPF we will see the value INET_ECN_xmit value initialized in
tcp_assign_congestion_control however when we configure this via BPF the
socket is in the closed state and as such it isn't configured, and I do not
see it being initialized when we transition the socket into the listen
state. The result of this is that the ECT0 bit is configured based on
whatever the default state is for the socket.

Any easy way to reproduce this is to monitor the following with tcpdump:
tools/testing/selftests/bpf/test_progs -t bpf_tcp_ca

Without this patch the SYN/ACK will follow whatever the default is. If dctcp
all SYN/ACK packets will have the ECT0 bit set, and if it is not then ECT0
will be cleared on all SYN/ACK packets. With this patch applied the SYN/ACK
bit matches the value seen on the other packets in the given stream.

Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control")
Signed-off-by: Alexander Duyck 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

ipv4: use IS_ENABLED instead of ifdef

2020-12-02T07:49:44+00:00

commit c09c8a27b9baa417864b9adc3228b10ae5eeec93 upstream.

Checking for ifdef CONFIG_x fails if CONFIG_x=m.

Use IS_ENABLED instead, which is true for both built-ins and modules.

Otherwise, a
> ip -4 route add 1.2.3.4/32 via inet6 fe80::2 dev eth1
fails with the message "Error: IPv6 support not enabled in kernel." if
CONFIG_IPV6 is `m`.

In the spirit of b8127113d01e53adba15b41aefd37b90ed83d631.

Fixes: d15662682db2 ("ipv4: Allow ipv6 gateway with ipv4 routes")
Cc: Kim Phillips 
Signed-off-by: Florian Klink 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/20201115224509.2020651-1-flokli@flokli.de
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect

2020-11-24T12:29:08+00:00

[ Upstream commit 36cd0e696a832a00247fca522034703566ac8885 ]

Fix sockmap sk_skb programs so that they observe sk_rcvbuf limits. This
allows users to tune SO_RCVBUF and sockmap will honor them.

We can refactor the if(charge) case out in later patches. But, keep this
fix to the point.

Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Suggested-by: Jakub Sitnicki 
Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/160556568657.73229.8404601585878439060.stgit@john-XPS-13-9370
Signed-off-by: Sasha Levin

bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made

2020-11-24T12:29:08+00:00

[ Upstream commit c9c89dcd872ea33327673fcb97398993a1f22736 ]

If copy_page_to_iter() fails or even partially completes, but with fewer
bytes copied than expected we currently reset sg.start and return EFAULT.
This proves problematic if we already copied data into the user buffer
before we return an error. Because we leave the copied data in the user
buffer and fail to unwind the scatterlist so kernel side believes data
has been copied and user side believes data has _not_ been received.

Expected behavior should be to return number of bytes copied and then
on the next read we need to return the error assuming its still there. This
can happen if we have a copy length spanning multiple scatterlist elements
and one or more complete before the error is hit.

The error is rare enough though that my normal testing with server side
programs, such as nginx, httpd, envoy, etc., I have never seen this. The
only reliable way to reproduce that I've found is to stream movies over
my browser for a day or so and wait for it to hang. Not very scientific,
but with a few extra WARN_ON()s in the code the bug was obvious.

When we review the errors from copy_page_to_iter() it seems we are hitting
a page fault from copy_page_to_iter_iovec() where the code checks
fault_in_pages_writeable(buf, copy) where buf is the user buffer. It
also seems typical server applications don't hit this case.

The other way to try and reproduce this is run the sockmap selftest tool
test_sockmap with data verification enabled, but it doesn't reproduce the
fault. Perhaps we can trigger this case artificially somehow from the
test tools. I haven't sorted out a way to do that yet though.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/160556566659.73229.15694973114605301063.stgit@john-XPS-13-9370
Signed-off-by: Sasha Levin

tcp: only postpone PROBE_RTT if RTT is < current min_rtt estimate

2020-11-24T12:28:59+00:00

[ Upstream commit 1b9e2a8c99a5c021041bfb2d512dc3ed92a94ffd ]

During loss recovery, retransmitted packets are forced to use TCP
timestamps to calculate the RTT samples, which have a millisecond
granularity. BBR is designed using a microsecond granularity. As a
result, multiple RTT samples could be truncated to the same RTT value
during loss recovery. This is problematic, as BBR will not enter
PROBE_RTT if the RTT sample is <= the current min_rtt sample, meaning
that if there are persistent losses, PROBE_RTT will constantly be
pushed off and potentially never re-entered. This patch makes sure
that BBR enters PROBE_RTT by checking if RTT sample is < the current
min_rtt sample, rather than <=.

The Netflix transport/TCP team discovered this bug in the Linux TCP
BBR code during lab tests.

Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Ryan Sharpelletti 
Signed-off-by: Neal Cardwell 
Signed-off-by: Soheil Hassas Yeganeh 
Signed-off-by: Yuchung Cheng 
Link: https://lore.kernel.org/r/20201116174412.1433277-1-sharpelletti.kdev@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

inet_diag: Fix error path to cancel the meseage in inet_req_diag_fill()

2020-11-24T12:28:56+00:00

[ Upstream commit e33de7c5317e2827b2ba6fd120a505e9eb727b05 ]

nlmsg_cancel() needs to be called in the error path of
inet_req_diag_fill to cancel the message.

Fixes: d545caca827b ("net: inet: diag: expose the socket mark to privileged processes.")
Reported-by: Hulk Robot 
Signed-off-by: Wang Hai 
Link: https://lore.kernel.org/r/20201116082018.16496-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

Exempt multicast addresses from five-second neighbor lifetime

2020-11-24T12:28:56+00:00

[ Upstream commit 8cf8821e15cd553339a5b48ee555a0439c2b2742 ]

Commit 58956317c8de ("neighbor: Improve garbage collection")
guarantees neighbour table entries a five-second lifetime.  Processes
which make heavy use of multicast can fill the neighour table with
multicast addresses in five seconds.  At that point, neighbour entries
can't be GC-ed because they aren't five seconds old yet, the kernel
log starts to fill up with "neighbor table overflow!" messages, and
sends start to fail.

This patch allows multicast addresses to be thrown out before they've
lived out their five seconds.  This makes room for non-multicast
addresses and makes messages to all addresses more reliable in these
circumstances.

Fixes: 58956317c8de ("neighbor: Improve garbage collection")
Signed-off-by: Jeff Dike 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: Update window_clamp if SOCK_RCVBUF is set

2020-11-18T18:20:32+00:00

[ Upstream commit 909172a149749242990a6e64cb55d55460d4e417 ]

When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.

Fixes: e88c64f0a425 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt")
Signed-off-by: Mao Wenan 
Signed-off-by: Eric Dumazet 
Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: udp: fix UDP header access on Fast/frag0 UDP GRO

2020-11-18T18:20:32+00:00

[ Upstream commit 4b1a86281cc1d0de46df3ad2cb8c1f86ac07681c ]

UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's
probably OK for non-frag0 paths (when all headers or even the entire
frame are already in skb head), this inline points to junk when
using Fast GRO (napi_gro_frags() or napi_gro_receive() with only
Ethernet header in skb head and all the rest in the frags) and breaks
GRO packet compilation and the packet flow itself.
To support both modes, skb_gro_header_fast() + skb_gro_header_slow()
are typically used. UDP even has an inline helper that makes use of
them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr()
to get rid of the out-of-order delivers.

Present since the introduction of plain UDP GRO in 5.0-rc1.

Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Cc: Eric Dumazet 
Signed-off-by: Alexander Lobakin 
Acked-by: Willem de Bruijn 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman